The monitor result reason of the session.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Dell MIB copies (LibreNMS/Observium Community)NETGEAR official product and EOL MIB downloads
OID reference
1.3.6.1.4.1.89.95.13.1.13
The monitor result reason of the session.
Identification
{1 3 6 1 4 1 89 95 13 1 13}
Notes below names come from selected MIB definitions.
| Value | Name and source notes |
|---|---|
| 0 | notRejected |
| 1 | aclNotExst ACL sent by radius Server does not exist on the device |
| 2 | aclOvrfl ACL sent by radius server can not be applied because of TCAM overflow |
| 3 | authErr Rejected by Radius due wrong user name or password in Radius server |
| 4 | fltrErr Radius accept message contains more than 2 filter-id |
| 5 | ipv6WithMac Radius accept message contains filter with IPv6 DIP and MAC addresses |
| 6 | ipv6WithNotIp Radius accept message contains IPv6 and not IP simultaneously |
| 7 | polBasicMode Policy Map is not supported in the QoS basic mode |
| 8 | aclDel ACL was deleted by user |
| 9 | polDel Policy Map was deleted by user |
| 10 | vlanDfly VLAN sent by radius server can not be applied because it is the Default VLAN |
| 11 | vlanDynam VLAN sent by radius server can not be applied because it is a Dynamic VLAN |
| 12 | vlanGuest VLAN sent by radius server can not be applied because it is the Guest VLAN |
| 13 | vlanNoInMsg VLAN was not sent by Radius |
| 14 | vlanNotExst VLAN sent by radius Server does not exist on the device |
| 15 | vlanOvfl VLAN sent by radius server can not be applied because of TCAM overflow |
| 16 | vlanVoice VLAN sent by radius server can not be applied because it is a Voice VLAN |
| 17 | vlanUnauth VLAN sent by radius server can not be applied because it is a [The following comment may refer to this or the next value: Unauthenticated VLAN] |
| 18 | frsMthDeny First method is "deny" |
| 19 | radApierr RADIUS API returned error (e.g. No RADIUS server is configured). |
| 20 | radInvlres RADIUS server returned invalid packet (e.g. EAP Attribute is missing) |
| 21 | radNoresp RADIUS server is not responding |
| 22 | aclEgress ACL sent by radius Server is already bound as egress acl |
| 23 | maxHosts Max hosts allowed per port are reached |
| 24 | noActivity There is no traffic from this host |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: rldot1xAuthMultiSessionStatsPortNumber, rldot1xAuthMultiSessionStatsSourceMac.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.89.95.13.1.13
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
The displayed source records contain one distinct definition. Compare its source records.
rlDot1xAuthMultiSessionMonitorResultsReason OBJECT-TYPE
SYNTAX INTEGER {
notRejected(0),
aclNotExst(1), -- ACL sent by radius Server does not exist on the device
aclOvrfl(2), -- ACL sent by radius server can not be applied because of TCAM overflow
authErr(3), -- Rejected by Radius due wrong user name or password in Radius server
fltrErr(4), -- Radius accept message contains more than 2 filter-id
ipv6WithMac(5), -- Radius accept message contains filter with IPv6 DIP and MAC addresses
ipv6WithNotIp(6), -- Radius accept message contains IPv6 and not IP simultaneously
polBasicMode(7), -- Policy Map is not supported in the QoS basic mode
aclDel(8), -- ACL was deleted by user
polDel(9), -- Policy Map was deleted by user
vlanDfly(10), -- VLAN sent by radius server can not be applied because it is the Default VLAN
vlanDynam(11), -- VLAN sent by radius server can not be applied because it is a Dynamic VLAN
vlanGuest(12), -- VLAN sent by radius server can not be applied because it is the Guest VLAN
vlanNoInMsg(13), -- VLAN was not sent by Radius
vlanNotExst(14), -- VLAN sent by radius Server does not exist on the device
vlanOvfl(15), -- VLAN sent by radius server can not be applied because of TCAM overflow
vlanVoice(16), -- VLAN sent by radius server can not be applied because it is a Voice VLAN
vlanUnauth(17), -- VLAN sent by radius server can not be applied because it is a
-- Unauthenticated VLAN
frsMthDeny(18), -- First method is "deny"
radApierr(19), -- RADIUS API returned error (e.g. No RADIUS server is configured).
radInvlres(20), -- RADIUS server returned invalid packet (e.g. EAP Attribute is missing)
radNoresp(21), -- RADIUS server is not responding
aclEgress(22), -- ACL sent by radius Server is already bound as egress acl
maxHosts(23), -- Max hosts allowed per port are reached
noActivity(24) -- There is no traffic from this host
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitor result reason of the session."
::= { rldot1xAuthMultiSessionStatsEntry 13 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The monitor result reason of the session.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Dell MIB copies (LibreNMS/Observium Community)NETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlDot1xAuthMultiSessionMonitorResultsReason
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlDot1xAuthMultiSessionMonitorResultsReason",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"notRejected",
"(",
"0",
")",
",",
"aclNotExst",
"(",
"1",
")",
",",
"aclOvrfl",
"(",
"2",
")",
",",
"authErr",
"(",
"3",
")",
",",
"fltrErr",
"(",
"4",
")",
",",
"ipv6WithMac",
"(",
"5",
")",
",",
"ipv6WithNotIp",
"(",
"6",
")",
",",
"polBasicMode",
"(",
"7",
")",
",",
"aclDel",
"(",
"8",
")",
",",
"polDel",
"(",
"9",
")",
",",
"vlanDfly",
"(",
"10",
")",
",",
"vlanDynam",
"(",
"11",
")",
",",
"vlanGuest",
"(",
"12",
")",
",",
"vlanNoInMsg",
"(",
"13",
")",
",",
"vlanNotExst",
"(",
"14",
")",
",",
"vlanOvfl",
"(",
"15",
")",
",",
"vlanVoice",
"(",
"16",
")",
",",
"vlanUnauth",
"(",
"17",
")",
",",
"frsMthDeny",
"(",
"18",
")",
",",
"radApierr",
"(",
"19",
")",
",",
"radInvlres",
"(",
"20",
")",
",",
"radNoresp",
"(",
"21",
")",
",",
"aclEgress",
"(",
"22",
")",
",",
"maxHosts",
"(",
"23",
")",
",",
"noActivity",
"(",
"24",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The monitor result reason of the session.\"",
"::=",
"{",
"rldot1xAuthMultiSessionStatsEntry",
"13",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"notRejected",
0
],
[
"aclNotExst",
1
],
[
"aclOvrfl",
2
],
[
"authErr",
3
],
[
"fltrErr",
4
],
[
"ipv6WithMac",
5
],
[
"ipv6WithNotIp",
6
],
[
"polBasicMode",
7
],
[
"aclDel",
8
],
[
"polDel",
9
],
[
"vlanDfly",
10
],
[
"vlanDynam",
11
],
[
"vlanGuest",
12
],
[
"vlanNoInMsg",
13
],
[
"vlanNotExst",
14
],
[
"vlanOvfl",
15
],
[
"vlanVoice",
16
],
[
"vlanUnauth",
17
],
[
"frsMthDeny",
18
],
[
"radApierr",
19
],
[
"radInvlres",
20
],
[
"radNoresp",
21
],
[
"aclEgress",
22
],
[
"maxHosts",
23
],
[
"noActivity",
24
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The monitor result reason of the session."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: RADLAN-DOT1X-MIB
See published definition above
{'SNMPv2-TC': ['TruthValue', 'RowStatus'], 'BRIDGE-MIB': ['MacAddress'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qFdbId'], 'IEEE8021-PAE-MIB': ['PaeControlledPortStatus', 'dot1xAuthSessionStatsEntry', 'dot1xPaePortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Module: RADLAN-DOT1X-MIB
{'SNMPv2-TC': ['TruthValue', 'RowStatus'], 'BRIDGE-MIB': ['MacAddress'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qFdbId'], 'IEEE8021-PAE-MIB': ['PaeControlledPortStatus', 'dot1xAuthSessionStatsEntry', 'dot1xPaePortNumber'], 'IEEE8021X-PAE-MIB': ['ieee8021XPaePortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in MX510TX_MS510TXPP_MIBS_ODM_V6.7.0.42.zip.
Same file in MS510TX_TXPP_V6.7.0.37_MIB_V6.7.0.37.zip.
Module: RADLAN-DOT1X-MIB
{'SNMPv2-TC': ['TruthValue', 'RowStatus'], 'BRIDGE-MIB': ['MacAddress'], 'RADLAN-MIB': ['rnd'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qFdbId'], 'IEEE8021-PAE-MIB': ['PaeControlledPortStatus', 'dot1xAuthSessionStatsEntry', 'dot1xPaePortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in MIB-6.5.1.22.zip.
Same file in XS728T_XS748T_mib_files.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.59.zip.
Same file in XS728T_XS748T_MIB_V6.5.1.42.zip.
Vendor MIB copy from the Observium Community archive. Dell support.
Module: Dell-VRTX-DOT1X-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-TC': ['TruthValue', 'RowStatus'], 'BRIDGE-MIB': ['MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qFdbId'], 'Dell-VRTX-MIB': ['rnd'], 'IEEE8021-PAE-MIB': ['PaeControlledPortStatus', 'dot1xAuthSessionStatsEntry', 'dot1xPaePortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Vendor MIB copy from the Observium Community archive. Dell support.
Module: Dell-DOT1X-MIB
{'Dell-MIB': ['rnd'], 'SNMPv2-TC': ['TruthValue', 'RowStatus'], 'BRIDGE-MIB': ['MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qFdbId'], 'IEEE8021-PAE-MIB': ['PaeControlledPortStatus', 'dot1xAuthSessionStatsEntry', 'dot1xPaePortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.95.13.1.1 | rldot1xAuthMultiSessionStatsPortNumber | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.2 | rldot1xAuthMultiSessionStatsSourceMac | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.3 | rldot1xAuthMultiSessionOctetsRx | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.4 | rldot1xAuthMultiSessionOctetsTx | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.5 | rldot1xAuthMultiSessionFramesRx | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.6 | rldot1xAuthMultiSessionFramesTx | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.7 | rldot1xAuthMultiSessionId | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.8 | rldot1xAuthMultiSessionTime | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.9 | rldot1xAuthMultiSessionUserName | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.10 | rldot1xAuthMultiSessionRadiusAttrVlan | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.11 | rldot1xAuthMultiSessionRadiusAttrFilterId | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.12 | rldot1xAuthMultiSessionRadiusAttrSecondFilterId | 0 | 0 | |
| 1.3.6.1.4.1.89.95.13.1.14 | rlDot1xAuthMultiSessionMethodType | 0 | 0 |