Status in source: current.
Names: zySysMgmtAutoConfigurationState
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"zySysMgmtAutoConfigurationState",
"OBJECT-TYPE",
"SYNTAX",
"EnabledStatus",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable(1)/Disable(2) Auto Configuration feature on the switch. Function Description: During startup, the system will automatically try to get the configuration file from remote server- and to load it to runtime memory. Note: 1. If the state is enabled, it won't take effect immediately until system is rebooted. 2. To use this function, please follow the below requirements: For DHCP mode: a) The startup config must enable these functions: - DHCP Client. - Auto Configuration. b) The DHCP and TFTP servers must be running on a remote device while this function is using. And the TFTP server IP address and configuration file name must be delivered by DHCP server- for telling switch device where to get the configuration. For HTTPS mode: a) The startup config must enable/setup these functions: - Auto Configuration. - Specify a HTTPS URL. b) The HTTPS server must be running on a remote device while this function is using.\"",
"::=",
"{",
"zyxelSysMgmtAutoConfigurationSetup",
"1",
"}"
],
"syntax_tree": [
[
"row",
"EnabledStatus"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable(1)/Disable(2) Auto Configuration feature on the switch. Function Description: During startup, the system will automatically try to get the configuration file from remote server- and to load it to runtime memory. Note: 1. If the state is enabled, it won't take effect immediately until system is rebooted. 2. To use this function, please follow the below requirements: For DHCP mode: a) The startup config must enable these functions: - DHCP Client. - Auto Configuration. b) The DHCP and TFTP servers must be running on a remote device while this function is using. And the TFTP server IP address and configuration file name must be delivered by DHCP server- for telling switch device where to get the configuration. For HTTPS mode: a) The startup config must enable/setup these functions: - Auto Configuration. - Specify a HTTPS URL. b) The HTTPS server must be running on a remote device while this function is using."
],
null,
null,
null,
null
]
}
- Zyxel MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
Zyxel support.
Module: ZYXEL-SYSTEM-MGMT-MIB
See published definition above
Module imports
{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'IpAddress', 'NOTIFICATION-TYPE'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'ZYXEL-ES-SMI': ['esMgmt']}
· Download ZYXEL-SYSTEM-MGMT-MIB
Related source files and packages:
- Zyxel official Download Library MIBs
· Publisher's source file: Source package: CX4800-56F_5.zip
Module: ZYXEL-SYSTEM-MGMT-MIB
Same published definition
Module imports
{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'IpAddress', 'NOTIFICATION-TYPE'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'ZYXEL-ES-SMI': ['esMgmt']}
· Download ZYXEL-SYSTEM-MGMT-MIB.mib
Same file in XS3800-28_8.zip.
Same file in XS1935-12F_3.zip.
Same file in XS1930-12HP_12.zip.
Same file in XMG2230-28HP_2.zip.