OID reference
1.3.6.1.4.1.8962.2.1.2.1.17.9
This object will be used to configure the action that the sensor will need to take when the sensor is unable to verify the validaity of the certificate. This is not applicable on I-series and M-series Default: decrypt(3)
Identification
{1 3 6 1 4 1 8962 2 1 2 1 17 9}
| Value | Name |
|---|---|
| 1 | ignore |
| 2 | block |
| 3 | decrypt |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.8962.2.1.2.1.17.9.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
sslProxyOutboundUnknownServerCertificate OBJECT-TYPE
SYNTAX INTEGER {
ignore (1),
block (2),
decrypt (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object will be used to configure the action that the sensor will need to
take when the sensor is unable to verify the validaity of the certificate.
This is not applicable on I-series and M-series
Default: decrypt(3)"
::= { sslConfigGrp 9 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object will be used to configure the action that the sensor will need to take when the sensor is unable to verify the validaity of the certificate. This is not applicable on I-series and M-series Default: decrypt(3)
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: sslProxyOutboundUnknownServerCertificate
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sslProxyOutboundUnknownServerCertificate",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"ignore",
"(",
"1",
")",
",",
"block",
"(",
"2",
")",
",",
"decrypt",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object will be used to configure the action that the sensor will need to take when the sensor is unable to verify the validaity of the certificate. This is not applicable on I-series and M-series Default: decrypt(3)\"",
"::=",
"{",
"sslConfigGrp",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"ignore",
1
],
[
"block",
2
],
[
"decrypt",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object will be used to configure the action that the sensor will need to take when the sensor is unable to verify the validaity of the certificate. This is not applicable on I-series and M-series Default: decrypt(3)"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: TRELLIX-SENSOR-CONF-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'RowStatus', 'MacAddress', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'IpAddress', 'TimeTicks', 'Unsigned32'], 'TRELLIX-SENSOR-SMI': ['ivSensorConfiguration', 'respPortIndex', 'intfPortIndex', 'slotIndex', 'intfPhysicalPortIndex', 'ntpServerIndex', 'sslProbeIpv4Index', 'sslProbeIpv6Index', 'processorNumIndex', 'intfVirtualPortIndex', 'intfVirtualSlotIndex'], 'TRELLIX-INTRUVERT-TC': ['TrellixFEType', 'TrellixIDSOperatingMode', 'TrellixIDSPortType', 'TrellixIDSResponseMode', 'TrellixIDSActionResult', 'TrellixIDSActionStatus', 'TrellixIDSAction', 'TrellixIDSCardType', 'TrellixTFTPFileType', 'TrellixTFTPFailedResult', 'TrellixTFTPInProgressResult', 'TrellixTFTPStatus', 'TrellixTFTPAction', 'TrellixGEType', 'TrellixCUGEType', 'TrellixPortSpeed', 'TrellixPluggableModuleType', 'TrellixPortLinearIndex']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8962.2.1.2.1.17.1 | sslSessionCacheLifetime | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.2 | sslSupportAction | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.3 | sslSupportStatus | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.4 | sslSessionRemoveCerts | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.5 | sslPktLoggingEnable | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.6 | sslModesofOperation | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.7 | sslSessionCacheLifetimeOutbound | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.8 | sslPktLoggingOutboundEnable | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.10 | sslProxyOutboundUntrustedServerCertficate | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.11 | sslProxyOutboundUnsupportedCipherSuite | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.12 | sslProxyInboundUnsupportedCipherSuite | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.13 | sslProxyOutboundUnsupportedServerCertificate | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.14 | sslProxyInboundUnsupportedServerCertificate | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.15 | maxSslFlowSupportedInSslDisableMode | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.16 | maxFlowSupportedInSslDisableMode | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.17 | maxSslFlowSupportedInSslInboundLegacyMode | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.18 | maxFlowSupportedInSslInboundLegacyMode | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.19 | maxSslFlowSupportedInSslOutboundMode | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.20 | maxFlowSupportedInSslOutboundMode | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.21 | sslModesofOperationStatus | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.22 | sslProxyOutboundUnknownURLCategory | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.17.23 | sslShKeyDecryptEnable | 0 | 0 |