OID reference
1.3.6.1.4.1.8962.2.1.2.1.18.1
This specifies if sensor is configured to detect failure and go into L2 mode on exceeding cfg threshold within cfg duration. Default: 2, disabled
Identification
{1 3 6 1 4 1 8962 2 1 2 1 18 1}
| Value | Name |
|---|---|
| 1 | enable |
| 2 | disable |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.8962.2.1.2.1.18.1.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
l2ModeEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This specifies if sensor is configured to detect failure and go into L2 mode on exceeding cfg threshold within cfg duration.
Default: 2, disabled"
::= { l2ConfigGrp 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This specifies if sensor is configured to detect failure and go into L2 mode on exceeding cfg threshold within cfg duration. Default: 2, disabled
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: l2ModeEnable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"l2ModeEnable",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This specifies if sensor is configured to detect failure and go into L2 mode on exceeding cfg threshold within cfg duration. Default: 2, disabled\"",
"::=",
"{",
"l2ConfigGrp",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This specifies if sensor is configured to detect failure and go into L2 mode on exceeding cfg threshold within cfg duration. Default: 2, disabled"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: TRELLIX-SENSOR-CONF-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'RowStatus', 'MacAddress', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'IpAddress', 'TimeTicks', 'Unsigned32'], 'TRELLIX-SENSOR-SMI': ['ivSensorConfiguration', 'respPortIndex', 'intfPortIndex', 'slotIndex', 'intfPhysicalPortIndex', 'ntpServerIndex', 'sslProbeIpv4Index', 'sslProbeIpv6Index', 'processorNumIndex', 'intfVirtualPortIndex', 'intfVirtualSlotIndex'], 'TRELLIX-INTRUVERT-TC': ['TrellixFEType', 'TrellixIDSOperatingMode', 'TrellixIDSPortType', 'TrellixIDSResponseMode', 'TrellixIDSActionResult', 'TrellixIDSActionStatus', 'TrellixIDSAction', 'TrellixIDSCardType', 'TrellixTFTPFileType', 'TrellixTFTPFailedResult', 'TrellixTFTPInProgressResult', 'TrellixTFTPStatus', 'TrellixTFTPAction', 'TrellixGEType', 'TrellixCUGEType', 'TrellixPortSpeed', 'TrellixPluggableModuleType', 'TrellixPortLinearIndex']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8962.2.1.2.1.18.2 | l2ModeStatus | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.18.3 | l2ModeCfgDuration | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.18.4 | l2ModeCfgThreshold | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.18.5 | l2ModeOccCount | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.18.6 | l2ModeReason | 0 | 0 |