OID reference
1.3.6.1.4.1.8962.2.1.2.1.26.5
This object is used to configure the number of alerts that need to be sent before sensor starts to throttle the ez alerts. For example if this value is 10, it will send the first 10 ez alerts with the following key: aclid/vidsid/srcip/destip. This parameters will use the ezAlertThrottleInterval as the interval. Defaul…
Identification
{1 3 6 1 4 1 8962 2 1 2 1 26 5}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.8962.2.1.2.1.26.5.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ezAlertThrottleThreshold OBJECT-TYPE
SYNTAX INTEGER (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the number of alerts that
need to be sent before sensor starts to throttle the ez alerts.
For example if this value is 10, it will send the first 10
ez alerts with the following key: aclid/vidsid/srcip/destip.
This parameters will use the ezAlertThrottleInterval as the
interval.
Default: 5"
::= { ezLogAlertGrp 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object is used to configure the number of alerts that need to be sent before sensor starts to throttle the ez alerts. For example if this value is 10, it will send the first 10 ez alerts with the following key: aclid/vidsid/srcip/destip. This parameters will use the ezAlertThrottleInterval as the interval. Default: 5
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ezAlertThrottleThreshold
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ezAlertThrottleThreshold",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1",
".",
".",
"25",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to configure the number of alerts that need to be sent before sensor starts to throttle the ez alerts. For example if this value is 10, it will send the first 10 ez alerts with the following key: aclid/vidsid/srcip/destip. This parameters will use the ezAlertThrottleInterval as the interval. Default: 5\"",
"::=",
"{",
"ezLogAlertGrp",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1,
25
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to configure the number of alerts that need to be sent before sensor starts to throttle the ez alerts. For example if this value is 10, it will send the first 10 ez alerts with the following key: aclid/vidsid/srcip/destip. This parameters will use the ezAlertThrottleInterval as the interval. Default: 5"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: TRELLIX-SENSOR-CONF-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'RowStatus', 'MacAddress', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'IpAddress', 'TimeTicks', 'Unsigned32'], 'TRELLIX-SENSOR-SMI': ['ivSensorConfiguration', 'respPortIndex', 'intfPortIndex', 'slotIndex', 'intfPhysicalPortIndex', 'ntpServerIndex', 'sslProbeIpv4Index', 'sslProbeIpv6Index', 'processorNumIndex', 'intfVirtualPortIndex', 'intfVirtualSlotIndex'], 'TRELLIX-INTRUVERT-TC': ['TrellixFEType', 'TrellixIDSOperatingMode', 'TrellixIDSPortType', 'TrellixIDSResponseMode', 'TrellixIDSActionResult', 'TrellixIDSActionStatus', 'TrellixIDSAction', 'TrellixIDSCardType', 'TrellixTFTPFileType', 'TrellixTFTPFailedResult', 'TrellixTFTPInProgressResult', 'TrellixTFTPStatus', 'TrellixTFTPAction', 'TrellixGEType', 'TrellixCUGEType', 'TrellixPortSpeed', 'TrellixPluggableModuleType', 'TrellixPortLinearIndex']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8962.2.1.2.1.26.1 | ezAlertLogging | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.26.2 | ezAlertThrottleMaxIpPair | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.26.3 | ezAlertThrottleInterval | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.26.4 | ezAlertThrottleAction | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.26.6 | ezAlertDirectToSyslog | 0 | 0 |