OID reference
1.3.6.1.4.1.8962.2.1.2.1.3.2
This object is used to indicate if the sensor is in failover configuration or not. If the sensors are in failover configuration, then both sensors have to be set to on(1). Default: off(2)
Identification
{1 3 6 1 4 1 8962 2 1 2 1 3 2}
| Value | Name |
|---|---|
| 1 | on |
| 2 | off |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.8962.2.1.2.1.3.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ivSysFailoverAction OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to indicate if the sensor is in failover
configuration or not. If the sensors are in failover
configuration, then both sensors have to be set to on(1).
Default: off(2)"
::= { systemFailoverGrp 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object is used to indicate if the sensor is in failover configuration or not. If the sensors are in failover configuration, then both sensors have to be set to on(1). Default: off(2)
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ivSysFailoverAction
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ivSysFailoverAction",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"on",
"(",
"1",
")",
",",
"off",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to indicate if the sensor is in failover configuration or not. If the sensors are in failover configuration, then both sensors have to be set to on(1). Default: off(2)\"",
"::=",
"{",
"systemFailoverGrp",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"on",
1
],
[
"off",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to indicate if the sensor is in failover configuration or not. If the sensors are in failover configuration, then both sensors have to be set to on(1). Default: off(2)"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: TRELLIX-SENSOR-CONF-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'RowStatus', 'MacAddress', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'IpAddress', 'TimeTicks', 'Unsigned32'], 'TRELLIX-SENSOR-SMI': ['ivSensorConfiguration', 'respPortIndex', 'intfPortIndex', 'slotIndex', 'intfPhysicalPortIndex', 'ntpServerIndex', 'sslProbeIpv4Index', 'sslProbeIpv6Index', 'processorNumIndex', 'intfVirtualPortIndex', 'intfVirtualSlotIndex'], 'TRELLIX-INTRUVERT-TC': ['TrellixFEType', 'TrellixIDSOperatingMode', 'TrellixIDSPortType', 'TrellixIDSResponseMode', 'TrellixIDSActionResult', 'TrellixIDSActionStatus', 'TrellixIDSAction', 'TrellixIDSCardType', 'TrellixTFTPFileType', 'TrellixTFTPFailedResult', 'TrellixTFTPInProgressResult', 'TrellixTFTPStatus', 'TrellixTFTPAction', 'TrellixGEType', 'TrellixCUGEType', 'TrellixPortSpeed', 'TrellixPluggableModuleType', 'TrellixPortLinearIndex']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8962.2.1.2.1.3.1 | ivSysFailoverStatus | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.3.3 | ivSysFailoverMode | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.3.4 | ivSysFailopenAction | 0 | 0 | |
| 1.3.6.1.4.1.8962.2.1.2.1.3.5 | ivSysSTPForwardConfig | 0 | 0 |