| 1.3.6.1.4.1.9.10.65.1.2.2.1.1 |
mplsLdpEntityLdpId | 0 | 0 |
The LDP identifier.
The first four octets encode an IP address
assigned to the LSR, and the last two octets
identify a specific la… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.2 |
mplsLdpEntityIndex | 0 | 0 |
This index is used as a secondary index to uniquely
identify this row. Before creating a row in this table,
the 'mplsLdpEntityIn… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.3 |
mplsLdpEntityProtocolVersion | 0 | 0 |
The version number of the protocol. The value of 0 on a
read indicates that the version of the protocol is unknown.
Otherwise, t… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.4 |
mplsLdpEntityAdminStatus | 0 | 0 |
The administrative status of this LDP Entity.
If this object is changed from 'enable' to 'disable'
and this entity has already at… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.5 |
mplsLdpEntityOperStatus | 0 | 0 |
The operational status of this LDP Entity. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.6 |
mplsLdpEntityWellKnownDiscoveryPort, mplsLdpEntityTcpDscPort | 0 | 0 |
The well known LDP Discovery Port. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.7 |
mplsLdpEntityMaxPduLength, mplsLdpEntityUdpDscPort | 0 | 0 |
The maximum PDU Length that is sent in
the Common Session Parameters of an Initialization
Message. A value of 255 or less specifi… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.8 |
mplsLdpEntityKeepAliveHoldTimer, mplsLdpEntityMaxPduLength | 0 | 0 |
The two octet value which is the proposed keep alive hold
timer for this LDP Entity. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.9 |
mplsLdpEntityHelloHoldTimer, mplsLdpEntityKeepAliveHoldTimer | 0 | 0 |
The two octet value which is the proposed Hello hold
timer for this LDP Entity. A value of 0 means use the
default, which is 15 s… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.10 |
mplsLdpEntityFailedInitSessionTrapEnable, mplsLdpEntityHelloHoldTimer | 0 | 0 |
Indicates whether the
'mplsLdpFailedInitSessionThresholdExceeded'
trap should be generated.
If the value of this object is 'enable… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.11 |
mplsLdpEntityFailedInitSessionThreshold, mplsLdpEntityInitSesThreshold | 0 | 0 |
When attempting to establish a session with a
given Peer, the given LDP Entity should
send out the SNMP notification,
'mplsLdpFail… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.12 |
mplsLdpEntityLabelDistributionMethod, mplsLdpEntityLabelDistMethod | 0 | 0 |
For any given LDP session, the method of
label distribution must be specified. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.13 |
mplsLdpEntityPVLimitMismatchTrapEnable, mplsLdpEntityLabelRetentionMode | 0 | 0 |
mplsLdpEntityPVLimitMismatchtrapEnable |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.14 |
mplsLdpEntityPathVectorLimit, mplsLdpEntityPVLMisTrapEnable | 0 | 0 |
If the value of this object is 0 (zero) then
Loop Dection for Path Vectors is disabled.
Otherwise, if this object has a value gre… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.15 |
mplsLdpEntityHopCountLoopDetection, mplsLdpEntityPVL | 0 | 0 |
An indication of whether loop detection based
on hop count is disabled or enabled for this
Entity. If this object has the value … |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.16 |
mplsLdpEntityHopCount, mplsLdpEntityHopCountLimit | 0 | 0 |
If the value of 'mplsLdpEntityHopCountLoopDetection'
for this entry is 'enabled(1)', then this object
represents the initial Hop … |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.17 |
mplsLdpEntityTargetedPeer, mplsLdpEntityTargPeer | 0 | 0 |
If this LDP entity uses targeted peer then set
this to true. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.18 |
mplsLdpEntityTargetedPeerAddrType, mplsLdpEntityTargPeerAddrType | 0 | 0 |
The type of the internetwork layer address used for
the Extended Discovery. This object indicates how
the value of mplsLdpEntityT… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.19 |
mplsLdpEntityTargetedPeerAddr, mplsLdpEntityTargPeerAddr | 0 | 0 |
The value of the internetwork layer address used for
the Extended Discovery. |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.20 |
mplsLdpEntityOptionalParameters | 0 | 0 |
Specifies the optional parameters for the LDP
Initialization Message. If the value is generic(1)
then no optional parameters wil… |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.21 |
mplsLdpEntityDiscontinuityTime | 0 | 0 |
The value of sysUpTime on the most recent occasion
at which any one or more of this entity's counters
suffered a discontinuity. … |
| 1.3.6.1.4.1.9.10.65.1.2.2.1.23 |
mplsLdpEntityRowStatus | 0 | 0 |
An object that allows entries in this table to
be created and deleted using the
RowStatus convention.
Once the 'mplsLdpEntityAdmin… |