| 1.3.6.1.4.1.9.5.1.3.1.1.1 |
moduleIndex | 0 | 0 |
A unique value for each module within the
chassis. |
| 1.3.6.1.4.1.9.5.1.3.1.1.2 |
moduleType | 0 | 0 |
The type of module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.3 |
moduleSerialNumber | 0 | 0 |
The serial number of the module in a numeric
format. If the module uses an alphanumeric serial
number, this MIB object will retur… |
| 1.3.6.1.4.1.9.5.1.3.1.1.4 |
moduleHwHiVersion | 0 | 0 |
The high part of the hardware version of the
module.
For example, if the hardware version is 3.1, the
value of moduleHwHiVersion i… |
| 1.3.6.1.4.1.9.5.1.3.1.1.5 |
moduleHwLoVersion | 0 | 0 |
The low part of the hardware version of the
module.
For example, if the hardware version is 3.1, the
value of moduleHwLoVersion is… |
| 1.3.6.1.4.1.9.5.1.3.1.1.6 |
moduleFwHiVersion | 0 | 0 |
The high part of the firmware version number. For
example, if the firmware version is 3.1, the value
of moduleFwHiVersion is 3.
Th… |
| 1.3.6.1.4.1.9.5.1.3.1.1.7 |
moduleFwLoVersion | 0 | 0 |
The low part of the firmware version number. For
example, if the firmware version is 3.1, the value
of moduleFwLoVersion is 1.
Thi… |
| 1.3.6.1.4.1.9.5.1.3.1.1.8 |
moduleSwHiVersion | 0 | 0 |
The high part of the software version number. For
example, if the software version is 3.1, the value
of moduleSwHiVersion is 3.
Th… |
| 1.3.6.1.4.1.9.5.1.3.1.1.9 |
moduleSwLoVersion | 0 | 0 |
The low part of the software version number. For
example, if the software version is 3.1, the value
of moduleSwLoVersion is 1.
Thi… |
| 1.3.6.1.4.1.9.5.1.3.1.1.10 |
moduleStatus | 0 | 0 |
The operational status of the module. If the
status is not ok, the value of moduleTestResult
gives more detailed information abou… |
| 1.3.6.1.4.1.9.5.1.3.1.1.11 |
moduleTestResult | 0 | 0 |
The result of the module's self test. A zero
indicates that the module passed all tests. Bits
set in the result indicate error co… |
| 1.3.6.1.4.1.9.5.1.3.1.1.12 |
moduleAction | 0 | 0 |
This object, when read, returns one of the
following results:
other(1): module permanently enabled
enable(3): module currently … |
| 1.3.6.1.4.1.9.5.1.3.1.1.13 |
moduleName | 0 | 0 |
A descriptive string used by the network
administrator to name the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.14 |
moduleNumPorts | 0 | 0 |
The number of ports supported by the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.15 |
modulePortStatus | 0 | 0 |
A series of bytes containing status information
about the module and each of the ports on the
module.
The first byte contains the … |
| 1.3.6.1.4.1.9.5.1.3.1.1.16 |
moduleSubType | 0 | 0 |
The type of daughterboard attached to this
module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.17 |
moduleModel | 0 | 0 |
The manufacturer's model number for the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.18 |
moduleHwVersion | 0 | 0 |
The hardware version of the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.19 |
moduleFwVersion | 0 | 0 |
The firmware version of the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.20 |
moduleSwVersion | 0 | 0 |
The software version of the module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.21 |
moduleStandbyStatus | 0 | 0 |
Redundant status of a module that supports
redundancy. |
| 1.3.6.1.4.1.9.5.1.3.1.1.22 |
moduleIPAddress | 0 | 0 |
If the module has a separate IP address to
reach it by, then it is reported here.
Otherwise, this object has a value of
'00000000H… |
| 1.3.6.1.4.1.9.5.1.3.1.1.23 |
moduleIPAddressVlan | 0 | 0 |
If the moduleIPAddress is valid then this
object reports the VLAN to access that IP
address on. Otherwise this object has a value
… |
| 1.3.6.1.4.1.9.5.1.3.1.1.24 |
moduleSubType2 | 0 | 0 |
The type of daughterboard attached to this
module. |
| 1.3.6.1.4.1.9.5.1.3.1.1.25 |
moduleSlotNum | 0 | 0 |
This value is determined by the chassis slot
number where the module is located. Valid entries
are 1 to the value of chassisNumSl… |
| 1.3.6.1.4.1.9.5.1.3.1.1.26 |
moduleSerialNumberString | 0 | 0 |
The serial number of the module. This MIB object
will return the module serial number for any
module that either a numeric or an … |
| 1.3.6.1.4.1.9.5.1.3.1.1.28 |
moduleAdditionalStatus | 0 | 0 |
The additional status of the module.
fruInstalled(0) indicates that whether or not
FRU is installed on the module.
powerDenied(1) … |