OID reference

ciscoLwappCdpMIB

1.3.6.1.4.1.9.9.623

Description

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration o…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.9.9 (ciscoMgmt)
Node code
623
Node name
ciscoLwappCdpMIB
Numeric OID
1.3.6.1.4.1.9.9.623
URN notation
urn:oid:1.3.6.1.4.1.9.9.623
Type
OBJECT IDENTIFIER
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 9 9 623}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/9/9/623
  • /ISO/Identified-Organization/6/1/4/1/9/9/623
  • /ISO/3/6/1/4/1/9/9/623
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/enterprise/me1200/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/enterprise/Cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/enterprises/me1200/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/enterprises/Cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/me1200/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/Cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/vendor-objects/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/vendor-objects/me1200/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/vendor-objects/Cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/org/dod/internet/private/enterprise/me1200/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/org/dod/internet/private/enterprise/Cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • Additional combinations skipped.

The displayed source records contain one distinct definition. Compare its source records.

ciscoLwappCdpMIB MODULE-IDENTITY
    LAST-UPDATED    "201704270000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems,
            Customer Service

            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            Email: cs-wnbu-snmcp@cisco.com"
    DESCRIPTION
        "This MIB is intended to be implemented on all those
         devices operating as Central Controllers (CC) that
         terminate the Light Weight Access Point Protocol
         tunnel from Light-weight LWAPP Access Points.

         This MIB provides configuration and status information
         about CDP neighbors of LWAPP APs. The MIB provides  
         configuration of CDP feature on the LWAPP Access Points.
         The MIB can also be used to retrieve the status of the 
         CDP cache information on the various LWAPP access
         points.

         The CDP MIB is also supported by controller and provides
         configuration and status information about CDP neighbors
         of the controller.

         The relationship between CC and the LWAPP APs
         can be depicted as follows:

         +......+     +......+     +......+           +......+
         +      +     +      +     +      +           +      +
         +  CC  +     +  CC  +     +  CC  +           +  CC  +
         +      +     +      +     +      +           +      +
         +......+     +......+     +......+           +......+
         ..            .             .                 .
         ..            .             .                 .
         .  .            .             .                 .
         .    .            .             .                 .
         .      .            .             .                 .
         .        .            .             .                 .
         +......+ +......+     +......+      +......+          +......+
         +      + +      +     +      +      +      +          +      +
         +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
         +      + +      +     +      +      +      +          +      +
         +......+ +......+     +......+      +......+          +......+
         .              .             .                 .
         .  .              .             .                 .
         .    .              .             .                 .
         .      .              .             .                 .
         .        .              .             .                 .
         +......+ +......+     +......+      +......+          +......+
         +      + +      +     +      +      +      +          +      +
         +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
         +      + +      +     +      +      +      +          +      +
         +......+ +......+     +......+      +......+          +......+


         The LWAPP tunnel exists between the controller and
         the APs.  The MNs communicate with the APs through
         the protocol defined by the 802.11 standard.

         LWAPP APs, upon bootup, discover and join one of the
         controllers and the controller pushes the configuration,
         that includes the WLAN parameters, to the LWAPP APs.
         The APs then encapsulate all the 802.11 frames from
         wireless clients inside LWAPP frames and forward
         the LWAPP frames to the controller.

                            GLOSSARY

         Access Point ( AP )

         An entity that contains an 802.11 medium access
         control ( MAC ) and physical layer ( PHY ) interface
         and provides access to the distribution services via
         the wireless medium for associated clients.  

         LWAPP APs encapsulate all the 802.11 frames in
         LWAPP frames and sends it to the controller to which
         it is logically connected.

         Basic Service Set Identifier (BSSID)

         The identifier for the service set comprising of
         all the 802.11 stations under the control of
         one coordinating Access Point.  This identifier
         happens to be the MAC address of the dot11 radio
         interface of the Access Point.  The wireless
         clients that associate with the Access Point
         get the wired uplink through this particular 
         dot11 interface. 

         Central Controller ( CC )

         The central entity that terminates the LWAPP protocol
         tunnel from the LWAPP APs.  Throughout this MIB,
         this entity also referred to as 'controller'.  

         Light Weight Access Point Protocol ( LWAPP ) 

         This is a generic protocol that defines the 
         communication between the Access Points and the
         central controller. 

         Cisco Discovery Protocol ( CDP )

         Protocol for discovery of neighboring devices.


         REFERENCE

         [1] Part 11 Wireless LAN Medium Access Control ( MAC )
         and Physical Layer ( PHY ) Specifications.

         [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
         Weight Access Point Protocol."
    REVISION        "201704270000Z"
    DESCRIPTION
            "Updated the description for some objects."
    REVISION        "200911230000Z"
    DESCRIPTION
            "Added the variables clcCdpApCacheDuplex and
            clcCdpApCacheInterfaceSpeed to clcCdpApCacheTable."
    REVISION        "200703280000Z"
    DESCRIPTION
            "This is the initial version of this module."
    ::= { ciscoMgmt 623 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.

This MIB provides configuration and status information
about CDP neighbors of LWAPP APs. The MIB provides
configuration of CDP feature on the LWAPP Access Points.
The MIB can also be used to retrive the status of the
CDP cache information on the various LWAPP LWAPP Access
Points.

The CDP MIB is also supported by Controller and provides
configuration and status information about CDP neighbours
of the controller.

The relationship between CC and the LWAPP APs
can be depicted as follows:

+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+


The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.

LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.

GLOSSARY

Access Point ( AP )

An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.

LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.

Basic Service Set Identifier (BSSID)

The identifier for the service set comprising of
all the 802.11 stations under the control of
one coordinating Access Point. This identifier
happens to be the MAC address of the dot11 radio
interface of the Access Point. The wireless
clients that associate with the Access Point
get the wired uplink through this particular
dot11 interface.

Central Controller ( CC )

The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.

Light Weight Access Point Protocol ( LWAPP )

This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.

Cisco Discovery Protocol ( CDP )

Protocol for discovery of neighboring devices.


REFERENCE

[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.

[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.
Sources for this description

Circitor

Parsed from CISCO-LWAPP-CDP-MIB.mib · CISCO-LWAPP-CDP-MIB

Source file: Download CISCO-LWAPP-CDP-MIB.mib

Cisco

Description 2

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration of CDP feature on the LWAPP Access Points. The MIB can also be used to retrieve the status of the CDP cache information on the various LWAPP access points. The CDP MIB is also supported by controller and provides configuration and status information about CDP neighbors of the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the central controller. Cisco Discovery Protocol ( CDP ) Protocol for discovery of neighboring devices. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.

Sources for this description

CiscoCisco MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; representative source files are shown for each definition.

Records for description 2Cisco, Cisco MIB copies (LibreNMS/Observium Community), and others1 record · 3 sources

Description 2

ciscoLwappCdpMIB · unspecifiedCisco, Cisco MIB copies (LibreNMS/Observium Community), and others3 sources

Status in source: unspecified.

Names: ciscoLwappCdpMIB

Technical details
{
  "smi_kind": "MODULE-IDENTITY",
  "definition": [
    "ciscoLwappCdpMIB",
    "MODULE-IDENTITY",
    "LAST-UPDATED",
    [
      "literal",
      "223230313730343237303030305a22"
    ],
    "ORGANIZATION",
    "\"Cisco Systems Inc.\"",
    "CONTACT-INFO",
    "\"Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmcp@cisco.com\"",
    "DESCRIPTION",
    "\"This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration of CDP feature on the LWAPP Access Points. The MIB can also be used to retrieve the status of the CDP cache information on the various LWAPP access points. The CDP MIB is also supported by controller and provides configuration and status information about CDP neighbors of the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the central controller. Cisco Discovery Protocol ( CDP ) Protocol for discovery of neighboring devices. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.\"",
    "REVISION",
    [
      "literal",
      "223230313730343237303030305a22"
    ],
    "DESCRIPTION",
    "\"Updated the description for some objects.\"",
    "REVISION",
    [
      "literal",
      "223230303931313233303030305a22"
    ],
    "DESCRIPTION",
    "\"Added the variables clcCdpApCacheDuplex and clcCdpApCacheInterfaceSpeed to clcCdpApCacheTable.\"",
    "REVISION",
    [
      "literal",
      "223230303730333238303030305a22"
    ],
    "DESCRIPTION",
    "\"This is the initial version of this module.\"",
    "::=",
    "{",
    "ciscoMgmt",
    "623",
    "}"
  ],
  "syntax_tree": [
    [
      "LAST-UPDATED",
      "201704270000Z"
    ],
    [
      "ORGANIZATION",
      "Cisco Systems Inc."
    ],
    [
      "CONTACT-INFO",
      "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmcp@cisco.com"
    ],
    [
      "DESCRIPTION",
      "This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration of CDP feature on the LWAPP Access Points. The MIB can also be used to retrieve the status of the CDP cache information on the various LWAPP access points. The CDP MIB is also supported by controller and provides configuration and status information about CDP neighbors of the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the central controller. Cisco Discovery Protocol ( CDP ) Protocol for discovery of neighboring devices. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol."
    ],
    [
      "Revisions",
      [
        [
          "201704270000Z",
          [
            "DESCRIPTION",
            "Updated the description for some objects."
          ]
        ],
        [
          "200911230000Z",
          [
            "DESCRIPTION",
            "Added the variables clcCdpApCacheDuplex and clcCdpApCacheInterfaceSpeed to clcCdpApCacheTable."
          ]
        ],
        [
          "200703280000Z",
          [
            "DESCRIPTION",
            "This is the initial version of this module."
          ]
        ]
      ]
    ]
  ]
}
  • Cisco · Publisher's source file: CISCO-LWAPP-CDP-MIB.my

    Module: CISCO-LWAPP-CDP-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['InterfaceIndexOrZero'], 'CISCO-TC': ['CiscoNetworkProtocol', 'CiscoNetworkAddress'], 'CISCO-SMI': ['ciscoMgmt'], 'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'CISCO-LWAPP-AP-MIB': ['cLApSysMacAddress'], 'CISCO-LWAPP-TC-MIB': ['CLCdpAdvtVersionType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
    · Download CISCO-LWAPP-CDP-MIB.my

Historical records

Additional source information

Information from Circitor
ciscoLwappCdpMIB MODULE-IDENTITY
    LAST-UPDATED    "200703280000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems,
            Customer Service

            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            Email: cs-wnbu-snmcp@cisco.com"
    DESCRIPTION
        "This MIB is intended to be implemented on all those
        devices operating as Central Controllers (CC) that
        terminate the Light Weight Access Point Protocol
        tunnel from Light-weight LWAPP Access Points.

        This MIB provides configuration and status information
        about CDP neighbors of LWAPP APs. The MIB provides  
        configuration of CDP feature on the LWAPP Access Points.
        The MIB can also be used to retrive the status of the 
        CDP cache information on the various LWAPP LWAPP Access
        Points.

        The CDP MIB is also supported by Controller and provides
        configuration and status information about CDP neighbours
        of the controller.

        The relationship between CC and the LWAPP APs
        can be depicted as follows:

        +......+     +......+     +......+           +......+
        +      +     +      +     +      +           +      +
        +  CC  +     +  CC  +     +  CC  +           +  CC  +
        +      +     +      +     +      +           +      +
        +......+     +......+     +......+           +......+
        ..            .             .                 .
        ..            .             .                 .
        .  .            .             .                 .
        .    .            .             .                 .
        .      .            .             .                 .
        .        .            .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+
        .              .             .                 .
        .  .              .             .                 .
        .    .              .             .                 .
        .      .              .             .                 .
        .        .              .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+


        The LWAPP tunnel exists between the controller and
        the APs.  The MNs communicate with the APs through
        the protocol defined by the 802.11 standard.

        LWAPP APs, upon bootup, discover and join one of the
        controllers and the controller pushes the configuration,
        that includes the WLAN parameters, to the LWAPP APs.
        The APs then encapsulate all the 802.11 frames from
        wireless clients inside LWAPP frames and forward
        the LWAPP frames to the controller.

                           GLOSSARY

        Access Point ( AP )

        An entity that contains an 802.11 medium access
        control ( MAC ) and physical layer ( PHY ) interface
        and provides access to the distribution services via
        the wireless medium for associated clients.  

        LWAPP APs encapsulate all the 802.11 frames in
        LWAPP frames and sends it to the controller to which
        it is logically connected.

        Basic Service Set Identifier (BSSID)

        The identifier for the service set comprising of
        all the 802.11 stations under the control of
        one coordinating Access Point.  This identifier
        happens to be the MAC address of the dot11 radio
        interface of the Access Point.  The wireless
        clients that associate with the Access Point
        get the wired uplink through this particular 
        dot11 interface. 

        Central Controller ( CC )

        The central entity that terminates the LWAPP protocol
        tunnel from the LWAPP APs.  Throughout this MIB,
        this entity also referred to as 'controller'. 

        Light Weight Access Point Protocol ( LWAPP ) 

        This is a generic protocol that defines the 
        communication between the Access Points and the
        Central Controller. 

        Cisco Discovery Protocol ( CDP )

        Protocol for discovery of neighboring devices.


        REFERENCE

        [1] Part 11 Wireless LAN Medium Access Control ( MAC )
        and Physical Layer ( PHY ) Specifications.

        [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
        Weight Access Point Protocol."
    REVISION        "200703280000Z"
    DESCRIPTION
        "This is the initial version of this module."
    ::= { ciscoMgmt 623 }
Information from Cisco SMIv1

Source file: Download CISCO-LWAPP-CDP-MIB-V1SMI.my · Publisher's file

Source file: Download CISCO-LWAPP-CDP-MIB-V1SMI.my.txt

ciscoLwappCdpMIB OBJECT IDENTIFIER ::= { ciscoMgmt 623 }
Information from OID Repository
Vendor: Cisco
Module: CISCO-LWAPP-CDP-MIB

[Automatically extracted from oidview.com]
Information from MIBdepot
ciscoLwappCdpMIB MODULE-IDENTITY
    LAST-UPDATED    "200703280000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems,
            Customer Service

            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            Email: cs-wnbu-snmcp@cisco.com"
    DESCRIPTION
        "This MIB is intended to be implemented on all those
        devices operating as Central Controllers (CC) that
        terminate the Light Weight Access Point Protocol
        tunnel from Light-weight LWAPP Access Points.

        This MIB provides configuration and status information
        about CDP neighbors of LWAPP APs. The MIB provides  
        configuration of CDP feature on the LWAPP Access Points.
        The MIB can also be used to retrive the status of the 
        CDP cache information on the various LWAPP LWAPP Access
        Points.

        The CDP MIB is also supported by Controller and provides
        configuration and status information about CDP neighbours
        of the controller.

        The relationship between CC and the LWAPP APs
        can be depicted as follows:

        +......+     +......+     +......+           +......+
        +      +     +      +     +      +           +      +
        +  CC  +     +  CC  +     +  CC  +           +  CC  +
        +      +     +      +     +      +           +      +
        +......+     +......+     +......+           +......+
        ..            .             .                 .
        ..            .             .                 .
        .  .            .             .                 .
        .    .            .             .                 .
        .      .            .             .                 .
        .        .            .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+
        .              .             .                 .
        .  .              .             .                 .
        .    .              .             .                 .
        .      .              .             .                 .
        .        .              .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+


        The LWAPP tunnel exists between the controller and
        the APs.  The MNs communicate with the APs through
        the protocol defined by the 802.11 standard.

        LWAPP APs, upon bootup, discover and join one of the
        controllers and the controller pushes the configuration,
        that includes the WLAN parameters, to the LWAPP APs.
        The APs then encapsulate all the 802.11 frames from
        wireless clients inside LWAPP frames and forward
        the LWAPP frames to the controller.

                           GLOSSARY

        Access Point ( AP )

        An entity that contains an 802.11 medium access
        control ( MAC ) and physical layer ( PHY ) interface
        and provides access to the distribution services via
        the wireless medium for associated clients.  

        LWAPP APs encapsulate all the 802.11 frames in
        LWAPP frames and sends it to the controller to which
        it is logically connected.

        Basic Service Set Identifier (BSSID)

        The identifier for the service set comprising of
        all the 802.11 stations under the control of
        one coordinating Access Point.  This identifier
        happens to be the MAC address of the dot11 radio
        interface of the Access Point.  The wireless
        clients that associate with the Access Point
        get the wired uplink through this particular 
        dot11 interface. 

        Central Controller ( CC )

        The central entity that terminates the LWAPP protocol
        tunnel from the LWAPP APs.  Throughout this MIB,
        this entity also referred to as 'controller'. 

        Light Weight Access Point Protocol ( LWAPP ) 

        This is a generic protocol that defines the 
        communication between the Access Points and the
        Central Controller. 

        Cisco Discovery Protocol ( CDP )

        Protocol for discovery of neighboring devices.


        REFERENCE

        [1] Part 11 Wireless LAN Medium Access Control ( MAC )
        and Physical Layer ( PHY ) Specifications.

        [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
        Weight Access Point Protocol."
    REVISION        "200703280000Z"
    DESCRIPTION
        "This is the initial version of this module."
    ::= { ciscoMgmt 623 }
Information from Cisco
ciscoLwappCdpMIB MODULE-IDENTITY
    LAST-UPDATED    "200911230000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems,
            Customer Service

            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            Email: cs-wnbu-snmcp@cisco.com"
    DESCRIPTION
        "This MIB is intended to be implemented on all those
        devices operating as Central Controllers (CC) that
        terminate the Light Weight Access Point Protocol
        tunnel from Light-weight LWAPP Access Points.

        This MIB provides configuration and status information
        about CDP neighbors of LWAPP APs. The MIB provides  
        configuration of CDP feature on the LWAPP Access Points.
        The MIB can also be used to retrive the status of the 
        CDP cache information on the various LWAPP LWAPP Access
        Points.

        The CDP MIB is also supported by Controller and provides
        configuration and status information about CDP neighbours
        of the controller.

        The relationship between CC and the LWAPP APs
        can be depicted as follows:

        +......+     +......+     +......+           +......+
        +      +     +      +     +      +           +      +
        +  CC  +     +  CC  +     +  CC  +           +  CC  +
        +      +     +      +     +      +           +      +
        +......+     +......+     +......+           +......+
        ..            .             .                 .
        ..            .             .                 .
        .  .            .             .                 .
        .    .            .             .                 .
        .      .            .             .                 .
        .        .            .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+
        .              .             .                 .
        .  .              .             .                 .
        .    .              .             .                 .
        .      .              .             .                 .
        .        .              .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+


        The LWAPP tunnel exists between the controller and
        the APs.  The MNs communicate with the APs through
        the protocol defined by the 802.11 standard.

        LWAPP APs, upon bootup, discover and join one of the
        controllers and the controller pushes the configuration,
        that includes the WLAN parameters, to the LWAPP APs.
        The APs then encapsulate all the 802.11 frames from
        wireless clients inside LWAPP frames and forward
        the LWAPP frames to the controller.

                           GLOSSARY

        Access Point ( AP )

        An entity that contains an 802.11 medium access
        control ( MAC ) and physical layer ( PHY ) interface
        and provides access to the distribution services via
        the wireless medium for associated clients.  

        LWAPP APs encapsulate all the 802.11 frames in
        LWAPP frames and sends it to the controller to which
        it is logically connected.

        Basic Service Set Identifier (BSSID)

        The identifier for the service set comprising of
        all the 802.11 stations under the control of
        one coordinating Access Point.  This identifier
        happens to be the MAC address of the dot11 radio
        interface of the Access Point.  The wireless
        clients that associate with the Access Point
        get the wired uplink through this particular 
        dot11 interface. 

        Central Controller ( CC )

        The central entity that terminates the LWAPP protocol
        tunnel from the LWAPP APs.  Throughout this MIB,
        this entity also referred to as 'controller'. 

        Light Weight Access Point Protocol ( LWAPP ) 

        This is a generic protocol that defines the 
        communication between the Access Points and the
        Central Controller. 

        Cisco Discovery Protocol ( CDP )

        Protocol for discovery of neighboring devices.


        REFERENCE

        [1] Part 11 Wireless LAN Medium Access Control ( MAC )
        and Physical Layer ( PHY ) Specifications.

        [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
        Weight Access Point Protocol."
    REVISION        "200911230000Z"
    DESCRIPTION
        "Added the variables clcCdpApCacheDuplex and
        clcCdpApCacheInterfaceSpeed to clcCdpApCacheTable."
    REVISION        "200703280000Z"
    DESCRIPTION
        "This is the initial version of this module."
    ::= { ciscoMgmt 623 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Direct children (3)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.9.9.623.0 ciscoLwappCdpMIBNotifs00
1.3.6.1.4.1.9.9.623.1 ciscoLwappCdpMIBObjects446
1.3.6.1.4.1.9.9.623.2 ciscoLwappCdpMIBConform27

Siblings (706)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.9.9.128 ciscoVlanIfTableRelationshipMIB112 ciscoVlanIftableRelationshipMIB
1.3.6.1.4.1.9.9.129 ciscoAtmVirtualIfMIB2139 The MIB module to manage ATM Virtual interface objects.
ATM virtual interfaces are configured on a physical line.
1.3.6.1.4.1.9.9.130 ciscoAdslDmtLineMIB372 This MIB module serves as an enterprise-specific extension of
the ADSL-LINE-MIB. The structure of this MIB module shadows
the st…
1.3.6.1.4.1.9.9.131 ciscoSystemMIB357 The systemGroup (see RFC 1907) provides a standard set of
basic system information. This MIB module contains
Cisco-defined exten…
1.3.6.1.4.1.9.9.132 ciscoDs3MIB2140 The MIB module to describe DS3 line objects. This is
an extension to the standard DS3 MIB(RFC 2496).
1.3.6.1.4.1.9.9.133 ciscoAtmCellLayerMIB1138 The MIB module to describe ATM cell layer objects and statistics
of a physical line.
1.3.6.1.4.1.9.9.134 ciscoClusterMIB349 The MIB module for the management of a group of
devices called a 'cluster'. A cluster comprises:

1. A command switch, which is a…
1.3.6.1.4.1.9.9.135 ciscoWirelessP2pBpiMIB366 This is the MIB Module for the Baseline Privacy Interface (BPI)
at Point to Point Wireless Radio Card.

This is a specialization o…
1.3.6.1.4.1.9.9.136 ciscoWirelessIfMIB3325 This is the MIB Module for the Cisco Wireless Radio
Point to Point interface specification.

I) Relationship of the Cisco Wireless…
1.3.6.1.4.1.9.9.137 ciscoWirelessTextualConventions00 This module defines textual conventions used
in Cisco Wireless MIBs.
1.3.6.1.4.1.9.9.138 ciscoEntityAlarmMIB366 This MIB module defines the managed objects that support the
monitoring of alarms generated by physical entities contained
by the…
1.3.6.1.4.1.9.9.139 ciscoEntityProvMIB313 This MIB module defines the objects that support provisioning
of 'container' class physical entities. Provisioning sets up
a 'co…
1.3.6.1.4.1.9.9.140 ciscoCopsClientMIB343 This MIB module is for configuration & statistic query
of Common Open Policy Service(COPS) client feature on the Cisco
device. C…
1.3.6.1.4.1.9.9.141 ciscoVSIControllerMIB221 This MIB module is used for configuring ATM Capable Switch
to be aware of VSI Controller information.

Terminolgies used:

VSI …
1.3.6.1.4.1.9.9.144 ciscoTransactionConnectionMIB266 The MIB module for retrieving Cisco Transaction
Connection configuration and status. Cisco Transaction
Connection routes transac…
1.3.6.1.4.1.9.9.145 ciscoWanModuleMIB332 The MIB to configure Connection Specific parameters and
statistics related information in a Service Module.
The Service Module(SM…
1.3.6.1.4.1.9.9.146 ciscoCallApplicationMIB2548 This MIB allows management of call applications on a
network device. A 'call application' is a software module
that processes cal…
1.3.6.1.4.1.9.9.147 ciscoFirewallMIB377 MIB module for monitoring Cisco Firewalls.
1.3.6.1.4.1.9.9.148 ciscoBgpPolAcctMIB215 BGP policy based accounting information
1.3.6.1.4.1.9.9.149 ciscoAdslLineCapMIB346 This MIB module serves as an enterprise-specific extension of
the ADSL-LINE-MIB. The structure of this MIB module shadows
the st…
1.3.6.1.4.1.9.9.150 ciscoAAASessionMIB331 This MIB module provides data for accounting sessions
based on Authentication, Authorization, Accounting
(AAA) protocols.


Referenc…
1.3.6.1.4.1.9.9.151 ciscoL2L3IfConfigMIB211 Interface switchport mode configuration management MIB.

This MIB is used to monitor and control
configuration of interface switch…
1.3.6.1.4.1.9.9.152 ciscoSipUaMIB4557 Cisco User Agent Session Initiation Protocol (SIP)
MIB module. SIP is an application-layer signalling
protocol for creating, mod…
1.3.6.1.4.1.9.9.154 ciscoIdslLineMIB3148 This MIB module describes IDSL (ISDN Digital Line Subscriber)
line interfaces. The structure of this module resembles that
of th…
1.3.6.1.4.1.9.9.155 ciscoSdslLineMIB3170 This MIB module describes all variations of the symmetric
DSL line interfaces. The structure of this module resembles
and mainta…
1.3.6.1.4.1.9.9.156 ciscoCcmMIB3487 The MIB Module for the management of a Cisco Unified
Communications Manager (CUCM) application running with a Cisco
Communication…
1.3.6.1.4.1.9.9.157 ciscoCdmaPdsnMIB3984 This MIB is to support the CDMA PDSN (Packet Data Serving
Node) feature. A CDMA2000 network supports wireless data
communication…
1.3.6.1.4.1.9.9.158 ciscoAAAClientMIB325 This MIB module provides data for authentication method
priority based on Authentication, Authorization,
Accounting (AAA) protoco…
1.3.6.1.4.1.9.9.159 ciscoQosPolicyConfigMIB335 This MIB module defines managed objects that support the
policy source configuration of Quality of Service (QoS) on
the device.

T…
1.3.6.1.4.1.9.9.160 ciscoCircuitInterfaceMIB211 The MIB module to configure the circuit description
for an interface.
The circuit description can be used to describe and
identify…
1.3.6.1.4.1.9.9.161 ciscoSlbMIB3279 The MIB for managing Server Load Balancing Manager(s),
such as the Cisco IOS SLB product.

This MIB includes instrumentation for t…
1.3.6.1.4.1.9.9.162 ciscoVsiMasterMIB3109 This MIB module contains objects related to the master side of the
the Virtual Switch Interface protocol used for control of ATM
…
1.3.6.1.4.1.9.9.163 ciscoCallTrackerMIB3104 CISCO-CALL-TRACKER-MIB
1.3.6.1.4.1.9.9.164 ciscoCallTrackerTCPMIB325 This MIB module provides TCP service connection
related data for tracking the progress and status of
a call.

This module extends t…
1.3.6.1.4.1.9.9.165 ciscoCallTrackerModemMIB397 This MIB module provides modem call related data for
tracking the progress and status of a call.

This module extends tables defin…
1.3.6.1.4.1.9.9.166 ciscoCBQosMIB2562 Cisco Class-Based QoS MIB

**********************************
Overview
**********************************
This MIB provides read acc…
1.3.6.1.4.1.9.9.167 ciscoWirelessDocsIfMib3140 This is the MIB Module for MCNS compliant Radio Frequency
(RF) interfaces in wireless point-to-multipoint subscriber
units (SU) a…
1.3.6.1.4.1.9.9.168 ciscoNtpMIB387 This MIB module defines a MIB which provides
mechanisms to monitor an NTP server.

The MIB is derived from the Technical Report
#Ma…
1.3.6.1.4.1.9.9.169 ciscoWirelessDocsExtMIB399 This MIB module defines Cisco-specific objects that
add to the functionality defined in
CISCO-WIRELESS-DOCS-IF-MIB.
These objects …
1.3.6.1.4.1.9.9.170 ciscoWirelessPhyMIB2112 This is the MIB Module for the Cisco Wireless Radio
Point to MultiPoint interface.
1.3.6.1.4.1.9.9.171 ciscoIpSecFlowMonitorMIB3507 This is a MIB Module for monitoring the
structures in IPSec-based Virtual Private Networks.
The MIB has been designed to be adopt…
1.3.6.1.4.1.9.9.172 ciscoIpSecPolMapMIB321 The MIB module maps the IPSec
entities created dynamically to the policy entities
that caused them. This is an appendix to the
IPS…
1.3.6.1.4.1.9.9.173 ciscoPrivateVlanMIB256 The MIB module to support Private VLAN feature on
Cisco's switching devices.
1.3.6.1.4.1.9.9.174 ciscoMobileIpMIB3533 An extension to the IETF MIB module defined in
RFC-2006 for managing Mobile IP implementations.

Mobile IP introduces the followin…
1.3.6.1.4.1.9.9.175 ciscoIfLinkConfigMIB215 The MIB module for configuration of bulk distribution
(de-multiplexing of traffic from higher-bandwidth to
lower-bandwidth interf…
1.3.6.1.4.1.9.9.176 ciscoRFMIB3117 This MIB provides configuration control and status for the
Redundancy Framework (RF) subsystem. RF provides a mechanism
for logic…
1.3.6.1.4.1.9.9.177 ciscoSaaApmMIB338 Acronyms and Terms:
SAA - Service Assurance Agent
APM - Application Performance Monitoring

A MIB for controlling SAA APM.
APM provi…
1.3.6.1.4.1.9.9.178 ciscoContentEngineMIB3263 The MIB module for the Cisco Content Engine from
Cisco Systems, Inc.
1.3.6.1.4.1.9.9.179 ciscoCatOSAclQosMIB3470 This MIB module is for Access Control Lists(ACLs) configuration
of Quality of Service (QoS) as well as Security feature on the
Ci…
1.3.6.1.4.1.9.9.180 ciscoWirelessRfMetricsMIB599 This is the MIB Module for the Cisco Wireless Radio
Point to MultiPoint interface specification.