OID reference

ciscoLwappCdpMIB

1.3.6.1.4.1.9.9.623

Description

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration o…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.9.9 (ciscoMgmt)
Node code
623
Node name
ciscoLwappCdpMIB
Numeric OID
1.3.6.1.4.1.9.9.623
URN notation
urn:oid:1.3.6.1.4.1.9.9.623
Type
OBJECT IDENTIFIER
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 9 9 623}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) cisco(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) me1200(9) ciscoMgmt(9) ciscoLwappCdpMIB(623)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/9/9/623
  • /ISO/Identified-Organization/6/1/4/1/9/9/623
  • /ISO/3/6/1/4/1/9/9/623
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/enterprise/me1200/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/enterprise/Cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/enterprises/me1200/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/enterprises/Cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/me1200/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/Cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/vendor-objects/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/vendor-objects/me1200/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/identified-organization/dod/internet/private/vendor-objects/Cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/org/dod/internet/private/enterprise/me1200/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/org/dod/internet/private/enterprise/Cisco/ciscoMgmt/ciscoLwappCdpMIB
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappCdpMIB
  • Additional combinations skipped.

The displayed source records contain one distinct definition. Compare its source records.

ciscoLwappCdpMIB MODULE-IDENTITY
    LAST-UPDATED    "201704270000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems,
            Customer Service

            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            Email: cs-wnbu-snmcp@cisco.com"
    DESCRIPTION
        "This MIB is intended to be implemented on all those
         devices operating as Central Controllers (CC) that
         terminate the Light Weight Access Point Protocol
         tunnel from Light-weight LWAPP Access Points.

         This MIB provides configuration and status information
         about CDP neighbors of LWAPP APs. The MIB provides  
         configuration of CDP feature on the LWAPP Access Points.
         The MIB can also be used to retrieve the status of the 
         CDP cache information on the various LWAPP access
         points.

         The CDP MIB is also supported by controller and provides
         configuration and status information about CDP neighbors
         of the controller.

         The relationship between CC and the LWAPP APs
         can be depicted as follows:

         +......+     +......+     +......+           +......+
         +      +     +      +     +      +           +      +
         +  CC  +     +  CC  +     +  CC  +           +  CC  +
         +      +     +      +     +      +           +      +
         +......+     +......+     +......+           +......+
         ..            .             .                 .
         ..            .             .                 .
         .  .            .             .                 .
         .    .            .             .                 .
         .      .            .             .                 .
         .        .            .             .                 .
         +......+ +......+     +......+      +......+          +......+
         +      + +      +     +      +      +      +          +      +
         +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
         +      + +      +     +      +      +      +          +      +
         +......+ +......+     +......+      +......+          +......+
         .              .             .                 .
         .  .              .             .                 .
         .    .              .             .                 .
         .      .              .             .                 .
         .        .              .             .                 .
         +......+ +......+     +......+      +......+          +......+
         +      + +      +     +      +      +      +          +      +
         +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
         +      + +      +     +      +      +      +          +      +
         +......+ +......+     +......+      +......+          +......+


         The LWAPP tunnel exists between the controller and
         the APs.  The MNs communicate with the APs through
         the protocol defined by the 802.11 standard.

         LWAPP APs, upon bootup, discover and join one of the
         controllers and the controller pushes the configuration,
         that includes the WLAN parameters, to the LWAPP APs.
         The APs then encapsulate all the 802.11 frames from
         wireless clients inside LWAPP frames and forward
         the LWAPP frames to the controller.

                            GLOSSARY

         Access Point ( AP )

         An entity that contains an 802.11 medium access
         control ( MAC ) and physical layer ( PHY ) interface
         and provides access to the distribution services via
         the wireless medium for associated clients.  

         LWAPP APs encapsulate all the 802.11 frames in
         LWAPP frames and sends it to the controller to which
         it is logically connected.

         Basic Service Set Identifier (BSSID)

         The identifier for the service set comprising of
         all the 802.11 stations under the control of
         one coordinating Access Point.  This identifier
         happens to be the MAC address of the dot11 radio
         interface of the Access Point.  The wireless
         clients that associate with the Access Point
         get the wired uplink through this particular 
         dot11 interface. 

         Central Controller ( CC )

         The central entity that terminates the LWAPP protocol
         tunnel from the LWAPP APs.  Throughout this MIB,
         this entity also referred to as 'controller'.  

         Light Weight Access Point Protocol ( LWAPP ) 

         This is a generic protocol that defines the 
         communication between the Access Points and the
         central controller. 

         Cisco Discovery Protocol ( CDP )

         Protocol for discovery of neighboring devices.


         REFERENCE

         [1] Part 11 Wireless LAN Medium Access Control ( MAC )
         and Physical Layer ( PHY ) Specifications.

         [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
         Weight Access Point Protocol."
    REVISION        "201704270000Z"
    DESCRIPTION
            "Updated the description for some objects."
    REVISION        "200911230000Z"
    DESCRIPTION
            "Added the variables clcCdpApCacheDuplex and
            clcCdpApCacheInterfaceSpeed to clcCdpApCacheTable."
    REVISION        "200703280000Z"
    DESCRIPTION
            "This is the initial version of this module."
    ::= { ciscoMgmt 623 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.

This MIB provides configuration and status information
about CDP neighbors of LWAPP APs. The MIB provides
configuration of CDP feature on the LWAPP Access Points.
The MIB can also be used to retrive the status of the
CDP cache information on the various LWAPP LWAPP Access
Points.

The CDP MIB is also supported by Controller and provides
configuration and status information about CDP neighbours
of the controller.

The relationship between CC and the LWAPP APs
can be depicted as follows:

+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+


The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.

LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.

GLOSSARY

Access Point ( AP )

An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.

LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.

Basic Service Set Identifier (BSSID)

The identifier for the service set comprising of
all the 802.11 stations under the control of
one coordinating Access Point. This identifier
happens to be the MAC address of the dot11 radio
interface of the Access Point. The wireless
clients that associate with the Access Point
get the wired uplink through this particular
dot11 interface.

Central Controller ( CC )

The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.

Light Weight Access Point Protocol ( LWAPP )

This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.

Cisco Discovery Protocol ( CDP )

Protocol for discovery of neighboring devices.


REFERENCE

[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.

[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.
Sources for this description

Circitor

Parsed from CISCO-LWAPP-CDP-MIB.mib · CISCO-LWAPP-CDP-MIB

Source file: Download CISCO-LWAPP-CDP-MIB.mib

Cisco

Description 2

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration of CDP feature on the LWAPP Access Points. The MIB can also be used to retrieve the status of the CDP cache information on the various LWAPP access points. The CDP MIB is also supported by controller and provides configuration and status information about CDP neighbors of the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the central controller. Cisco Discovery Protocol ( CDP ) Protocol for discovery of neighboring devices. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.

Sources for this description

CiscoCisco MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; representative source files are shown for each definition.

Records for description 2Cisco, Cisco MIB copies (LibreNMS/Observium Community), and others1 record · 3 sources

Description 2

ciscoLwappCdpMIB · unspecifiedCisco, Cisco MIB copies (LibreNMS/Observium Community), and others3 sources

Status in source: unspecified.

Names: ciscoLwappCdpMIB

Technical details
{
  "smi_kind": "MODULE-IDENTITY",
  "definition": [
    "ciscoLwappCdpMIB",
    "MODULE-IDENTITY",
    "LAST-UPDATED",
    [
      "literal",
      "223230313730343237303030305a22"
    ],
    "ORGANIZATION",
    "\"Cisco Systems Inc.\"",
    "CONTACT-INFO",
    "\"Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmcp@cisco.com\"",
    "DESCRIPTION",
    "\"This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration of CDP feature on the LWAPP Access Points. The MIB can also be used to retrieve the status of the CDP cache information on the various LWAPP access points. The CDP MIB is also supported by controller and provides configuration and status information about CDP neighbors of the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the central controller. Cisco Discovery Protocol ( CDP ) Protocol for discovery of neighboring devices. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.\"",
    "REVISION",
    [
      "literal",
      "223230313730343237303030305a22"
    ],
    "DESCRIPTION",
    "\"Updated the description for some objects.\"",
    "REVISION",
    [
      "literal",
      "223230303931313233303030305a22"
    ],
    "DESCRIPTION",
    "\"Added the variables clcCdpApCacheDuplex and clcCdpApCacheInterfaceSpeed to clcCdpApCacheTable.\"",
    "REVISION",
    [
      "literal",
      "223230303730333238303030305a22"
    ],
    "DESCRIPTION",
    "\"This is the initial version of this module.\"",
    "::=",
    "{",
    "ciscoMgmt",
    "623",
    "}"
  ],
  "syntax_tree": [
    [
      "LAST-UPDATED",
      "201704270000Z"
    ],
    [
      "ORGANIZATION",
      "Cisco Systems Inc."
    ],
    [
      "CONTACT-INFO",
      "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmcp@cisco.com"
    ],
    [
      "DESCRIPTION",
      "This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration of CDP feature on the LWAPP Access Points. The MIB can also be used to retrieve the status of the CDP cache information on the various LWAPP access points. The CDP MIB is also supported by controller and provides configuration and status information about CDP neighbors of the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the central controller. Cisco Discovery Protocol ( CDP ) Protocol for discovery of neighboring devices. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol."
    ],
    [
      "Revisions",
      [
        [
          "201704270000Z",
          [
            "DESCRIPTION",
            "Updated the description for some objects."
          ]
        ],
        [
          "200911230000Z",
          [
            "DESCRIPTION",
            "Added the variables clcCdpApCacheDuplex and clcCdpApCacheInterfaceSpeed to clcCdpApCacheTable."
          ]
        ],
        [
          "200703280000Z",
          [
            "DESCRIPTION",
            "This is the initial version of this module."
          ]
        ]
      ]
    ]
  ]
}
  • Cisco · Publisher's source file: CISCO-LWAPP-CDP-MIB.my

    Module: CISCO-LWAPP-CDP-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['InterfaceIndexOrZero'], 'CISCO-TC': ['CiscoNetworkProtocol', 'CiscoNetworkAddress'], 'CISCO-SMI': ['ciscoMgmt'], 'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'CISCO-LWAPP-AP-MIB': ['cLApSysMacAddress'], 'CISCO-LWAPP-TC-MIB': ['CLCdpAdvtVersionType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
    · Download CISCO-LWAPP-CDP-MIB.my

Historical records

Additional source information

Information from Circitor
ciscoLwappCdpMIB MODULE-IDENTITY
    LAST-UPDATED    "200703280000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems,
            Customer Service

            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            Email: cs-wnbu-snmcp@cisco.com"
    DESCRIPTION
        "This MIB is intended to be implemented on all those
        devices operating as Central Controllers (CC) that
        terminate the Light Weight Access Point Protocol
        tunnel from Light-weight LWAPP Access Points.

        This MIB provides configuration and status information
        about CDP neighbors of LWAPP APs. The MIB provides  
        configuration of CDP feature on the LWAPP Access Points.
        The MIB can also be used to retrive the status of the 
        CDP cache information on the various LWAPP LWAPP Access
        Points.

        The CDP MIB is also supported by Controller and provides
        configuration and status information about CDP neighbours
        of the controller.

        The relationship between CC and the LWAPP APs
        can be depicted as follows:

        +......+     +......+     +......+           +......+
        +      +     +      +     +      +           +      +
        +  CC  +     +  CC  +     +  CC  +           +  CC  +
        +      +     +      +     +      +           +      +
        +......+     +......+     +......+           +......+
        ..            .             .                 .
        ..            .             .                 .
        .  .            .             .                 .
        .    .            .             .                 .
        .      .            .             .                 .
        .        .            .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+
        .              .             .                 .
        .  .              .             .                 .
        .    .              .             .                 .
        .      .              .             .                 .
        .        .              .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+


        The LWAPP tunnel exists between the controller and
        the APs.  The MNs communicate with the APs through
        the protocol defined by the 802.11 standard.

        LWAPP APs, upon bootup, discover and join one of the
        controllers and the controller pushes the configuration,
        that includes the WLAN parameters, to the LWAPP APs.
        The APs then encapsulate all the 802.11 frames from
        wireless clients inside LWAPP frames and forward
        the LWAPP frames to the controller.

                           GLOSSARY

        Access Point ( AP )

        An entity that contains an 802.11 medium access
        control ( MAC ) and physical layer ( PHY ) interface
        and provides access to the distribution services via
        the wireless medium for associated clients.  

        LWAPP APs encapsulate all the 802.11 frames in
        LWAPP frames and sends it to the controller to which
        it is logically connected.

        Basic Service Set Identifier (BSSID)

        The identifier for the service set comprising of
        all the 802.11 stations under the control of
        one coordinating Access Point.  This identifier
        happens to be the MAC address of the dot11 radio
        interface of the Access Point.  The wireless
        clients that associate with the Access Point
        get the wired uplink through this particular 
        dot11 interface. 

        Central Controller ( CC )

        The central entity that terminates the LWAPP protocol
        tunnel from the LWAPP APs.  Throughout this MIB,
        this entity also referred to as 'controller'. 

        Light Weight Access Point Protocol ( LWAPP ) 

        This is a generic protocol that defines the 
        communication between the Access Points and the
        Central Controller. 

        Cisco Discovery Protocol ( CDP )

        Protocol for discovery of neighboring devices.


        REFERENCE

        [1] Part 11 Wireless LAN Medium Access Control ( MAC )
        and Physical Layer ( PHY ) Specifications.

        [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
        Weight Access Point Protocol."
    REVISION        "200703280000Z"
    DESCRIPTION
        "This is the initial version of this module."
    ::= { ciscoMgmt 623 }
Information from Cisco SMIv1

Source file: Download CISCO-LWAPP-CDP-MIB-V1SMI.my · Publisher's file

Source file: Download CISCO-LWAPP-CDP-MIB-V1SMI.my.txt

ciscoLwappCdpMIB OBJECT IDENTIFIER ::= { ciscoMgmt 623 }
Information from OID Repository
Vendor: Cisco
Module: CISCO-LWAPP-CDP-MIB

[Automatically extracted from oidview.com]
Information from MIBdepot
ciscoLwappCdpMIB MODULE-IDENTITY
    LAST-UPDATED    "200703280000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems,
            Customer Service

            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            Email: cs-wnbu-snmcp@cisco.com"
    DESCRIPTION
        "This MIB is intended to be implemented on all those
        devices operating as Central Controllers (CC) that
        terminate the Light Weight Access Point Protocol
        tunnel from Light-weight LWAPP Access Points.

        This MIB provides configuration and status information
        about CDP neighbors of LWAPP APs. The MIB provides  
        configuration of CDP feature on the LWAPP Access Points.
        The MIB can also be used to retrive the status of the 
        CDP cache information on the various LWAPP LWAPP Access
        Points.

        The CDP MIB is also supported by Controller and provides
        configuration and status information about CDP neighbours
        of the controller.

        The relationship between CC and the LWAPP APs
        can be depicted as follows:

        +......+     +......+     +......+           +......+
        +      +     +      +     +      +           +      +
        +  CC  +     +  CC  +     +  CC  +           +  CC  +
        +      +     +      +     +      +           +      +
        +......+     +......+     +......+           +......+
        ..            .             .                 .
        ..            .             .                 .
        .  .            .             .                 .
        .    .            .             .                 .
        .      .            .             .                 .
        .        .            .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+
        .              .             .                 .
        .  .              .             .                 .
        .    .              .             .                 .
        .      .              .             .                 .
        .        .              .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+


        The LWAPP tunnel exists between the controller and
        the APs.  The MNs communicate with the APs through
        the protocol defined by the 802.11 standard.

        LWAPP APs, upon bootup, discover and join one of the
        controllers and the controller pushes the configuration,
        that includes the WLAN parameters, to the LWAPP APs.
        The APs then encapsulate all the 802.11 frames from
        wireless clients inside LWAPP frames and forward
        the LWAPP frames to the controller.

                           GLOSSARY

        Access Point ( AP )

        An entity that contains an 802.11 medium access
        control ( MAC ) and physical layer ( PHY ) interface
        and provides access to the distribution services via
        the wireless medium for associated clients.  

        LWAPP APs encapsulate all the 802.11 frames in
        LWAPP frames and sends it to the controller to which
        it is logically connected.

        Basic Service Set Identifier (BSSID)

        The identifier for the service set comprising of
        all the 802.11 stations under the control of
        one coordinating Access Point.  This identifier
        happens to be the MAC address of the dot11 radio
        interface of the Access Point.  The wireless
        clients that associate with the Access Point
        get the wired uplink through this particular 
        dot11 interface. 

        Central Controller ( CC )

        The central entity that terminates the LWAPP protocol
        tunnel from the LWAPP APs.  Throughout this MIB,
        this entity also referred to as 'controller'. 

        Light Weight Access Point Protocol ( LWAPP ) 

        This is a generic protocol that defines the 
        communication between the Access Points and the
        Central Controller. 

        Cisco Discovery Protocol ( CDP )

        Protocol for discovery of neighboring devices.


        REFERENCE

        [1] Part 11 Wireless LAN Medium Access Control ( MAC )
        and Physical Layer ( PHY ) Specifications.

        [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
        Weight Access Point Protocol."
    REVISION        "200703280000Z"
    DESCRIPTION
        "This is the initial version of this module."
    ::= { ciscoMgmt 623 }
Information from Cisco
ciscoLwappCdpMIB MODULE-IDENTITY
    LAST-UPDATED    "200911230000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems,
            Customer Service

            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            Email: cs-wnbu-snmcp@cisco.com"
    DESCRIPTION
        "This MIB is intended to be implemented on all those
        devices operating as Central Controllers (CC) that
        terminate the Light Weight Access Point Protocol
        tunnel from Light-weight LWAPP Access Points.

        This MIB provides configuration and status information
        about CDP neighbors of LWAPP APs. The MIB provides  
        configuration of CDP feature on the LWAPP Access Points.
        The MIB can also be used to retrive the status of the 
        CDP cache information on the various LWAPP LWAPP Access
        Points.

        The CDP MIB is also supported by Controller and provides
        configuration and status information about CDP neighbours
        of the controller.

        The relationship between CC and the LWAPP APs
        can be depicted as follows:

        +......+     +......+     +......+           +......+
        +      +     +      +     +      +           +      +
        +  CC  +     +  CC  +     +  CC  +           +  CC  +
        +      +     +      +     +      +           +      +
        +......+     +......+     +......+           +......+
        ..            .             .                 .
        ..            .             .                 .
        .  .            .             .                 .
        .    .            .             .                 .
        .      .            .             .                 .
        .        .            .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+
        .              .             .                 .
        .  .              .             .                 .
        .    .              .             .                 .
        .      .              .             .                 .
        .        .              .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+


        The LWAPP tunnel exists between the controller and
        the APs.  The MNs communicate with the APs through
        the protocol defined by the 802.11 standard.

        LWAPP APs, upon bootup, discover and join one of the
        controllers and the controller pushes the configuration,
        that includes the WLAN parameters, to the LWAPP APs.
        The APs then encapsulate all the 802.11 frames from
        wireless clients inside LWAPP frames and forward
        the LWAPP frames to the controller.

                           GLOSSARY

        Access Point ( AP )

        An entity that contains an 802.11 medium access
        control ( MAC ) and physical layer ( PHY ) interface
        and provides access to the distribution services via
        the wireless medium for associated clients.  

        LWAPP APs encapsulate all the 802.11 frames in
        LWAPP frames and sends it to the controller to which
        it is logically connected.

        Basic Service Set Identifier (BSSID)

        The identifier for the service set comprising of
        all the 802.11 stations under the control of
        one coordinating Access Point.  This identifier
        happens to be the MAC address of the dot11 radio
        interface of the Access Point.  The wireless
        clients that associate with the Access Point
        get the wired uplink through this particular 
        dot11 interface. 

        Central Controller ( CC )

        The central entity that terminates the LWAPP protocol
        tunnel from the LWAPP APs.  Throughout this MIB,
        this entity also referred to as 'controller'. 

        Light Weight Access Point Protocol ( LWAPP ) 

        This is a generic protocol that defines the 
        communication between the Access Points and the
        Central Controller. 

        Cisco Discovery Protocol ( CDP )

        Protocol for discovery of neighboring devices.


        REFERENCE

        [1] Part 11 Wireless LAN Medium Access Control ( MAC )
        and Physical Layer ( PHY ) Specifications.

        [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
        Weight Access Point Protocol."
    REVISION        "200911230000Z"
    DESCRIPTION
        "Added the variables clcCdpApCacheDuplex and
        clcCdpApCacheInterfaceSpeed to clcCdpApCacheTable."
    REVISION        "200703280000Z"
    DESCRIPTION
        "This is the initial version of this module."
    ::= { ciscoMgmt 623 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Direct children (3)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.9.9.623.0 ciscoLwappCdpMIBNotifs00
1.3.6.1.4.1.9.9.623.1 ciscoLwappCdpMIBObjects446
1.3.6.1.4.1.9.9.623.2 ciscoLwappCdpMIBConform27

Siblings (706)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.9.9.249 ciscoEnhancedImageMIB244 Initial version of the MIB. This MIB has Image table
containing the following information related to the
running IOS image
1. Enti…
1.3.6.1.4.1.9.9.252 cTapMIB380 This module manages Cisco's intercept feature.
1.3.6.1.4.1.9.9.253 ciscoItpXuaMIB3250 The MIB for MTP3 User Adaptation (M3UA) and SCCP User
Adaptation (SUA) for Cisco's IP Transfer Point (ITP)
implementation.

The Cis…
1.3.6.1.4.1.9.9.254 ciscoSlbExtMIB3425 The extended MIB for managing Server Load Balancing
Manager(s). This MIB extends the SLB management
functionality in the CISCO-SL…
1.3.6.1.4.1.9.9.255 ciscoFabricMcastMIB330 Fabric Multicast Resource MIB module.
This MIB module is used for managing/tracking the fabric
multicast resource related informa…
1.3.6.1.4.1.9.9.256 ciscoFabricMcastApplMIB316 Fabric multicast resource MIB module.
This MIB module is used for managing/tracking the fabric
multicast resource application rel…
1.3.6.1.4.1.9.9.257 ciscoFabricHfrMIB390 Cisco Enhanced Benes fabric MIB module.
This MIB module is used for managing/tracking the Ehanced
Benes Fabric entities and/or fa…
1.3.6.1.4.1.9.9.259 ciscoPsaMicrocodeMIB324 Cisco PSA Microcode MIB - Overview

The PSA is the Packet Switching ASIC used
in module like engine 2(E2) line cards in GSR
for IP …
1.3.6.1.4.1.9.9.260 ciscoSsgMIB3218 The MIB Module manages Service Selection Gateway(SSG)
devices.

Service Selection Gateway(SSG) is a switching solution
for service…
1.3.6.1.4.1.9.9.261 ciscoPtopoExtnMIB218 This MIB module contains extensions to the PTOPO-MIB that
provide support to distinguish between bidirectional and
unidirectional…
1.3.6.1.4.1.9.9.262 ciscoVoaMIB214 This MIB module defines objects to configure and manage the
Variable Optical Attenuator (VOA) modules.

VOA modules are typically …
1.3.6.1.4.1.9.9.263 ciscoIgmpSnoopingMIB3286 The MIB module for IGMP Snooping feature.

Internet Group Management Protocol (IGMP) is the protocol used
by IPv4 end hosts to ind…
1.3.6.1.4.1.9.9.264 ciscoOpticalMonitorMIB372 This MIB module defines objects to monitor optical
characteristics and set corresponding thresholds on the
optical interfaces in …
1.3.6.1.4.1.9.9.265 ciscoEntityPfeMib358 The Packet Forwarding Engine technology are Cisco developed
Network Processors, which accelerates certain features in
order to pr…
1.3.6.1.4.1.9.9.268 ciscoWlanVlanMIB341 This MIB module provides network management
support for device VLAN configuration on
IEEE 802.11 wireless LAN.

ACRONYMS
AES
Advanced…
1.3.6.1.4.1.9.9.269 ciscoTBridgeDevIfMIB220 This MIB module provides network management support
for configuration and status information of devices
supporting transparent br…
1.3.6.1.4.1.9.9.270 ciscoSyslogEventExtMIB221 This MIB module extends the Cisco Syslog
MIB and provides network management support
to handle and process Syslog messages as
devi…
1.3.6.1.4.1.9.9.271 ciscoL2DevMonMIB324 This MIB module is for monitoring of active
layer 2 devices by hot standby layer 2 devices
and the configuration of hot standby s…
1.3.6.1.4.1.9.9.272 ciscoDot11IfMIB3212 This MIB module provides network management
support for Cisco IEEE 802.11 Wireless LAN
type device (Access Point) radio interface…
1.3.6.1.4.1.9.9.273 ciscoDot11AssociationMIB2107 This MIB module provides network management
information on IEEE 802.11 wireless device
association management and data packet for…
1.3.6.1.4.1.9.9.275 ciscoBcpMIB225 This MIB module describes the Managed Objects for
of Bridge Control Protocol (RFC2878). This MIB is
influenced by RFC1474.
1.3.6.1.4.1.9.9.276 ciscoIfExtensionMIB3147 A MIB module for extending the IF-MIB (RFC2863)
to add objects which provide additional information
about interfaces not availabl…
1.3.6.1.4.1.9.9.277 ciscoDdpIappMIB322 This MIB module describes the management support for
the Inter-Access Point Protocol (IAPP). IAPP is a
Cisco propriety Data Deli…
1.3.6.1.4.1.9.9.278 ciscoIpProtocolMIB363 The MIB module is for management of information
to support packet filtering on IP protocols.

The cippfIpProfileTable allows users…
1.3.6.1.4.1.9.9.279 ciscoAtmQosMIB367 The MIB is created to provide ATM QoS information in
these areas:

1. Traffic shaping on a per-VC basis
2. Traffic shaping on a pe…
1.3.6.1.4.1.9.9.280 ciscoOutageMIB375 This MIB module describes, stores, and reports outage
related information generated by individual hardware
and software component…
1.3.6.1.4.1.9.9.281 ciscoFabricC12kMIB3135 Cisco Fabric MIB module for c12000 series of routers.
This MIB module is used for managing/tracking the c12000
fabric entities an…
1.3.6.1.4.1.9.9.282 ciscoVsanMIB2104 The MIB module for the management of the Virtual Storage
Networks (VSANs) within the frame work of Cisco's VSAN
Architecture. T…
1.3.6.1.4.1.9.9.284 ciscoFcRouteMIB255 The MIB module for configuring and displaying FC (Fibre
Channel) Route Information.
1.3.6.1.4.1.9.9.285 ciscoPortChannelMIB243 The MIB module for management of Port Channel ports.
In addition to this MIB, CISCO-FC-FE-MIB and interface
mib (rfc2863) will al…
1.3.6.1.4.1.9.9.286 ciscoWwnmgrMIB238 The World Wide Name (WWN) in the fibre channel networking
technology is equivalent to the MAC address in Ethernet.
There are six …
1.3.6.1.4.1.9.9.287 ciscoFspfMIB495 Fabric Shortest Path First (FSPF) MIB.
1.3.6.1.4.1.9.9.288 ciscoRadiusMIB396 MIB module for monitoring and configuring
authentication and logging services using RADIUS
(Remote Authentication Dial In User Se…
1.3.6.1.4.1.9.9.289 ciscoFcFeMIB2352 This is the Cisco fibre element management MIB module.
It covers:
- Cisco extension to the interface MIB ( IF-MIB )
- Contains all…
1.3.6.1.4.1.9.9.290 ciscoVirtualNwIfMIB222 The MIB module for management of virtual network
interfaces to VSAN and VLAN.
1.3.6.1.4.1.9.9.292 ciscoRscnMIB267 The MIB module for the management of the Fibre
Channel's Registered State Change Notification
(RSCN) functionality, which is spec…
1.3.6.1.4.1.9.9.293 ciscoNsMIB267 The MIB module for the management of the Cisco
Name Server which realizes the FC-GS3
requirements for Name Server (NS).
1.3.6.1.4.1.9.9.294 ciscoZsMIB2271 The MIB module for the management of zoning within
the framework of Cisco's Zoning Server (ZS) Archi-
tecture which realizes the …
1.3.6.1.4.1.9.9.295 ciscoFcPingMIB237 The MIB module for the management of the
Fibre Channel Ping functionality.
1.3.6.1.4.1.9.9.296 ciscoFcTraceRouteMIB231 The MIB module for the management of the
Fibre Channel Trace Route functionality.
1.3.6.1.4.1.9.9.297 ciscoFcsMIB2122 The MIB module for the management of a Fabric
Configuration Server (FCS). An FCS is defined
by the FC-GS3 standard. This MIB ena…
1.3.6.1.4.1.9.9.299 ciscoExtScsiMIB268 The Cisco extension to CISCO-SCSI-MIB
which is a copy of the Internet draft,
the SCSI-MIB, from the IETF.

Glossary of terms used i…
1.3.6.1.4.1.9.9.300 ciscoCallHomeMIB3327 The MIB module for the management of Call Home feature
within the framework of Cisco's Call Home architecture.
Customers deployin…
1.3.6.1.4.1.9.9.301 ciscoSyslogExtMIB244 MIB module for configuring and monitoring System Log
related management parameters as defined by RFC 3164.
1.3.6.1.4.1.9.9.302 ciscoDmMIB288 The MIB module for the domain management functionality
defined by the Fibre Channel standards (FC-SW2). For the
purposes of this …
1.3.6.1.4.1.9.9.305 ciscoSystemExtMIB3113 MIB module for monitoring High Availability, SNMP SET
errors and bandwidths. This mib module also provides the
information on co…
1.3.6.1.4.1.9.9.309 ciscoIPIfMIB340 The MIB module for configuring IP characteristics
of the interfaces of a device.
1.3.6.1.4.1.9.9.311 ciscoEpmNotificationMIB348 Notifications directly from hardware and software and processed
notifications from various management applications can be furthe…
1.3.6.1.4.1.9.9.312 ciscoDataCollectionMIB384 The MIB module allows a management application to
select a set of MIB object instances whose values need
to be collected on a per…
1.3.6.1.4.1.9.9.313 ciscoL2ControlMIB3113 The CISCO-L2-CONTROL-MIB is used to control some layer 2
functions, including MAC limit function and unicast
flooding. This devi…