Reference record for OID 1.3.6.1.4.1.9.9.688

ciscoFlowMonitorTcMIB MODULE-IDENTITY
    LAST-UPDATED    "200812090000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
            San Jose, CA 95134

            Tel: +1 800 553-NETS

            E-mail: cs-snmp@cisco.com"
    DESCRIPTION
        "This MIB module defines textual conventions used by the MIB
        modules defining objects describing flow monitoring.

        GLOSSARY
        ============

        Alarm Action - a method used by the device to signal changes in
            an alarm condition.

        Alarm Aggregation - a technique used to efficiently monitor the
            same standing condition for a flow set.

        Alarm Condition - a standing condition for which the device
            signals changes in state.

        Alarm Group - a flow set for which the device monitors a
            configured standing condition, raising an alarm when a
            configured number of flows in the flow set assert the
            standing standing.

        Alarm Severity - the relative disposition of an alarm condition
            when raised by the device.  For example, a provider may
            regard a flow stop alarm as having a higher severity than a
            flow's loss fraction exceeding a configured threshold.

        Flow Monitor - a hardware or software entity that classifies
            traffic flows, collects flow data, and periodically
            computes flow metrics.

        Flow Metric - a measurement that reflects the quality of a
            traffic flow.

        Flow Point - represents the ingress or egress of a traffic flow.

        Flow Set - a group of traffic flows.

        Measurement Interval - the length of time over which a flow
            monitor collects data related to a traffic flow, after which
            the flow monitor computes flow metrics using the collected
            data.

        Standing Condition - represents a lasting error, fault, or
            warning resulting from the application of a set of criteria
            to the state of an entity, such as a flow monitor or traffic
            flow.  For example, a flow monitor may assert a standing
            condition if the number of traffic flows that expire in a
            meansurement interval exceeds a configured threshold.

        Traffic Flow - a unidirectional stream of packets conforming to
            a classifier.  For example, packets having a particular 
            source IP address, destination IP address, protocol type,
            source port number, and destination port number.
        "
    REVISION        "200812090000Z"
    DESCRIPTION
        "The initial version of the MIB module."
    ::= { ciscoMgmt 688 }

Source file: Download CISCO-FLOW-MONITOR-TC-MIB-V1SMI.my · Publisher's file

Publisher path: cisco/cisco-mibs/main/v1/CISCO-FLOW-MONITOR-TC-MIB-V1SMI.my; 20,170 bytes

Source file: Download CISCO-FLOW-MONITOR-TC-MIB-V1SMI.my.txt

File: cisco/CISCO-FLOW-MONITOR-TC-MIB-V1SMI.my.txt; 20,750 bytes

ciscoFlowMonitorTcMIB OBJECT IDENTIFIER ::= { ciscoMgmt 688 }

ciscoFlowMonitorTcMIB MODULE-IDENTITY
    LAST-UPDATED    "200812090000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
            San Jose, CA 95134

            Tel: +1 800 553-NETS

            E-mail: cs-snmp@cisco.com"
    DESCRIPTION
        "This MIB module defines textual conventions used by the MIB
        modules defining objects describing flow monitoring.

        GLOSSARY
        ============

        Alarm Action - a method used by the device to signal changes in
            an alarm condition.

        Alarm Aggregation - a technique used to efficiently monitor the
            same standing condition for a flow set.

        Alarm Condition - a standing condition for which the device
            signals changes in state.

        Alarm Group - a flow set for which the device monitors a
            configured standing condition, raising an alarm when a
            configured number of flows in the flow set assert the
            standing standing.

        Alarm Severity - the relative disposition of an alarm condition
            when raised by the device.  For example, a provider may
            regard a flow stop alarm as having a higher severity than a
            flow's loss fraction exceeding a configured threshold.

        Flow Monitor - a hardware or software entity that classifies
            traffic flows, collects flow data, and periodically
            computes flow metrics.

        Flow Metric - a measurement that reflects the quality of a
            traffic flow.

        Flow Point - represents the ingress or egress of a traffic flow.

        Flow Set - a group of traffic flows.

        Measurement Interval - the length of time over which a flow
            monitor collects data related to a traffic flow, after which
            the flow monitor computes flow metrics using the collected
            data.

        Standing Condition - represents a lasting error, fault, or
            warning resulting from the application of a set of criteria
            to the state of an entity, such as a flow monitor or traffic
            flow.  For example, a flow monitor may assert a standing
            condition if the number of traffic flows that expire in a
            meansurement interval exceeds a configured threshold.

        Traffic Flow - a unidirectional stream of packets conforming to
            a classifier.  For example, packets having a particular 
            source IP address, destination IP address, protocol type,
            source port number, and destination port number.
        "
    REVISION        "200812090000Z"
    DESCRIPTION
        "The initial version of the MIB module."
    ::= { ciscoMgmt 688 }

ciscoFlowMonitorTcMIB MODULE-IDENTITY
    LAST-UPDATED    "200812090000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
            San Jose, CA 95134

            Tel: +1 800 553-NETS

            E-mail: cs-snmp@cisco.com"
    DESCRIPTION
        "This MIB module defines textual conventions used by the MIB
        modules defining objects describing flow monitoring.

        GLOSSARY
        ============

        Alarm Action - a method used by the device to signal changes in
            an alarm condition.

        Alarm Aggregation - a technique used to efficiently monitor the
            same standing condition for a flow set.

        Alarm Condition - a standing condition for which the device
            signals changes in state.

        Alarm Group - a flow set for which the device monitors a
            configured standing condition, raising an alarm when a
            configured number of flows in the flow set assert the
            standing standing.

        Alarm Severity - the relative disposition of an alarm condition
            when raised by the device.  For example, a provider may
            regard a flow stop alarm as having a higher severity than a
            flow's loss fraction exceeding a configured threshold.

        Flow Monitor - a hardware or software entity that classifies
            traffic flows, collects flow data, and periodically
            computes flow metrics.

        Flow Metric - a measurement that reflects the quality of a
            traffic flow.

        Flow Point - represents the ingress or egress of a traffic flow.

        Flow Set - a group of traffic flows.

        Measurement Interval - the length of time over which a flow
            monitor collects data related to a traffic flow, after which
            the flow monitor computes flow metrics using the collected
            data.

        Standing Condition - represents a lasting error, fault, or
            warning resulting from the application of a set of criteria
            to the state of an entity, such as a flow monitor or traffic
            flow.  For example, a flow monitor may assert a standing
            condition if the number of traffic flows that expire in a
            meansurement interval exceeds a configured threshold.

        Traffic Flow - a unidirectional stream of packets conforming to
            a classifier.  For example, packets having a particular 
            source IP address, destination IP address, protocol type,
            source port number, and destination port number.
        "
    REVISION        "200812090000Z"
    DESCRIPTION
        "The initial version of the MIB module."
    ::= { ciscoMgmt 688 }