The filter port list. It is active only when the hit action is filtered. Set the action value to 0(filter) before the new setting. Note that the action will change deny action if there is no any port in the member set. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Status in source: current.
Names: me1200AclAceFilterPortList
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"me1200AclAceFilterPortList",
"OBJECT-TYPE",
"SYNTAX",
"ME1200PortList",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The filter port list. It is active only when the hit action is filtered. Set the action value to 0(filter) before the new setting. Note that the action will change deny action if there is no any port in the member set. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.\"",
"::=",
"{",
"me1200AclAceEntry",
"9",
"}"
],
"syntax_tree": [
[
"row",
"ME1200PortList"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The filter port list. It is active only when the hit action is filtered. Set the action value to 0(filter) before the new setting. Note that the action will change deny action if there is no any port in the member set. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'."
],
null,
null,
null,
null
]
}- cisco-products
· Publisher's source file
Module: ME1200-ACL-MIB
Published definition
me1200AclAceFilterPortList OBJECT-TYPE SYNTAX ME1200PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The filter port list. It is active only when the hit action is filtered. Set the action value to 0(filter) before the new setting. Note that the action will change deny action if there is no any port in the member set. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= { me1200AclAceEntry 9 }· Archived source file · Official repository archiveModule imports
{'ME1200-TC': ['ME1200PortList', 'ME1200Unsigned8', 'ME1200Unsigned16', 'ME1200RowEditorState', 'ME1200InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'CISCOME1200-MIB': ['me1200SwitchMgmt'], 'INET-ADDRESS-MIB': ['InetAddressIPv6']}
Source location: ME1200-ACL-MIB::me1200AclAceFilterPortList.Source version and references
Published package: Cisco ME1200-MIBS 15.4_2_SN1; file: ME1200-MIBS/15.4_2_SN1/ME1200-ACL-MIB.mib.
Downloaded: 2026-10-21T03:34:10.706537+00:00.
- cisco-products
· Publisher's source file
Module: ME1200-ACL-MIB
Published definition
me1200AclAceFilterPortList OBJECT-TYPE SYNTAX ME1200PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The filter port list. It is active only when the hit action is filtered. Set the action value to 0(filter) before the new setting. Note that the action will change deny action if there is no any port in the member set. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= { me1200AclAceEntry 9 }· Archived source file · Official repository archiveModule imports
{'ME1200-TC': ['ME1200PortList', 'ME1200Unsigned8', 'ME1200Unsigned16', 'ME1200RowEditorState', 'ME1200InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'CISCOME1200-MIB': ['me1200SwitchMgmt'], 'INET-ADDRESS-MIB': ['InetAddressIPv6']}
Source location: ME1200-ACL-MIB::me1200AclAceFilterPortList.Source version and references
Published package: Cisco ME1200-MIBS 15.4_3_SN; file: ME1200-MIBS/15.4_3_SN/ME1200-ACL-MIB.mib.
Same file in Cisco ME1200-MIBS 15.6_2_SN.
Same file in Cisco ME1200-MIBS 15.6_1_SN2.
Same file in Cisco ME1200-MIBS 15.6_1_SN1.
Same file in Cisco ME1200-MIBS 15.6_1_SN.
Downloaded: 2026-10-21T03:34:10.749536+00:00.
- cisco-products
· Publisher's source file
Module: ME1200-ACL-MIB
Published definition
me1200AclAceFilterPortList OBJECT-TYPE SYNTAX ME1200PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The filter port list. It is active only when the hit action is filtered. Set the action value to 0(filter) before the new setting. Note that the action will change deny action if there is no any port in the member set. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= { me1200AclAceEntry 9 }· Archived source file · Official repository archiveModule imports
{'ME1200-TC': ['ME1200PortList', 'ME1200Unsigned8', 'ME1200Unsigned16', 'ME1200RowEditorState', 'ME1200InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'CISCOME1200-MIB': ['me1200SwitchMgmt'], 'INET-ADDRESS-MIB': ['InetAddressIPv6']}
Source location: ME1200-ACL-MIB::me1200AclAceFilterPortList.Source version and references
Published package: Cisco ME1200-MIBS 15.4_3_SN1; file: ME1200-MIBS/15.4_3_SN1/ME1200-ACL-MIB.mib.
Downloaded: 2026-10-21T03:34:10.816536+00:00.
- cisco-products
· Publisher's source file
Module: ME1200-ACL-MIB
Published definition
me1200AclAceFilterPortList OBJECT-TYPE SYNTAX ME1200PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The filter port list. It is active only when the hit action is filtered. Set the action value to 0(filter) before the new setting. Note that the action will change deny action if there is no any port in the member set. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= { me1200AclAceEntry 9 }· Archived source file · Official repository archiveModule imports
{'ME1200-TC': ['ME1200InterfaceIndex', 'ME1200PortList', 'ME1200RowEditorState', 'ME1200Unsigned16', 'ME1200Unsigned8'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'MacAddress', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'IpAddress', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'CISCOME1200-MIB': ['me1200SwitchMgmt'], 'INET-ADDRESS-MIB': ['InetAddressIPv6']}
Source location: ME1200-ACL-MIB::me1200AclAceFilterPortList.Source version and references
Published package: Cisco ME1200-MIBS 15.6_4_SN; file: ME1200-MIBS/15.6_4_SN/ME1200-ACL-MIB.mib.
Same file in Cisco ME1200-MIBS 15.6_5_SN.
Downloaded: 2026-10-21T03:34:11.137533+00:00.