Enables/disables CDP awareness for the interface. CDP is Cisco's equivalent to LLDP. The CDP operation is restricted to decoding incoming CDP frames (The switch doesn't transmit CDP frames). CDP frames are only decoded if LLDP on the port is enabled. Only CDP TLVs that can be mapped to a corresponding field in the LLDP neighbors' table are decoded. All other TLVs are discarded (Unrecognized CDP TLVs and discarded CDP frames are not shown in the LLDP statistics.). CDP TLVs are mapped onto LLDP neighbors' table as shown below. CDP TLV 'Device ID' is mapped to the LLDP 'Chassis ID' field. CDP TLV 'Address' is mapped to the LLDP 'Management Address' field. The CDP address TLV can contain multiple addresses, but only the first address is shown in the LLDP neighbors table. CDP TLV 'Port ID' is mapped to the LLDP 'Port ID' field. CDP TLV 'Version and Platform' is mapped to the LLDP 'System Description' field. Both the CDP and LLDP support 'system capabilities', but the CDP capabilities cover capabilities that are not part of the LLDP. These capabilities are shown as 'others' in the LLDP neighbors' table. If all ports have CDP awareness disabled the switch forwards CDP frames received from neighbor devices. If at least one port has CDP awareness enabled all CDP frames are terminated by the switch. Note: When CDP awareness on a port is disabled the CDP information isn't removed immediately, but gets removed when the hold time is exceeded.
Status in source: current.
Names: cie1000LldpConfigCdpAware
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cie1000LldpConfigCdpAware",
"OBJECT-TYPE",
"SYNTAX",
"TruthValue",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enables/disables CDP awareness for the interface. CDP is Cisco's equivalent to LLDP. The CDP operation is restricted to decoding incoming CDP frames (The switch doesn't transmit CDP frames). CDP frames are only decoded if LLDP on the port is enabled. Only CDP TLVs that can be mapped to a corresponding field in the LLDP neighbors' table are decoded. All other TLVs are discarded (Unrecognized CDP TLVs and discarded CDP frames are not shown in the LLDP statistics.). CDP TLVs are mapped onto LLDP neighbors' table as shown below. CDP TLV 'Device ID' is mapped to the LLDP 'Chassis ID' field. CDP TLV 'Address' is mapped to the LLDP 'Management Address' field. The CDP address TLV can contain multiple addresses, but only the first address is shown in the LLDP neighbors table. CDP TLV 'Port ID' is mapped to the LLDP 'Port ID' field. CDP TLV 'Version and Platform' is mapped to the LLDP 'System Description' field. Both the CDP and LLDP support 'system capabilities', but the CDP capabilities cover capabilities that are not part of the LLDP. These capabilities are shown as 'others' in the LLDP neighbors' table. If all ports have CDP awareness disabled the switch forwards CDP frames received from neighbor devices. If at least one port has CDP awareness enabled all CDP frames are terminated by the switch. Note: When CDP awareness on a port is disabled the CDP information isn't removed immediately, but gets removed when the hold time is exceeded.\"",
"::=",
"{",
"cie1000LldpConfigEntry",
"4",
"}"
],
"syntax_tree": [
[
"row",
"TruthValue"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enables/disables CDP awareness for the interface. CDP is Cisco's equivalent to LLDP. The CDP operation is restricted to decoding incoming CDP frames (The switch doesn't transmit CDP frames). CDP frames are only decoded if LLDP on the port is enabled. Only CDP TLVs that can be mapped to a corresponding field in the LLDP neighbors' table are decoded. All other TLVs are discarded (Unrecognized CDP TLVs and discarded CDP frames are not shown in the LLDP statistics.). CDP TLVs are mapped onto LLDP neighbors' table as shown below. CDP TLV 'Device ID' is mapped to the LLDP 'Chassis ID' field. CDP TLV 'Address' is mapped to the LLDP 'Management Address' field. The CDP address TLV can contain multiple addresses, but only the first address is shown in the LLDP neighbors table. CDP TLV 'Port ID' is mapped to the LLDP 'Port ID' field. CDP TLV 'Version and Platform' is mapped to the LLDP 'System Description' field. Both the CDP and LLDP support 'system capabilities', but the CDP capabilities cover capabilities that are not part of the LLDP. These capabilities are shown as 'others' in the LLDP neighbors' table. If all ports have CDP awareness disabled the switch forwards CDP frames received from neighbor devices. If at least one port has CDP awareness enabled all CDP frames are terminated by the switch. Note: When CDP awareness on a port is disabled the CDP information isn't removed immediately, but gets removed when the hold time is exceeded."
],
null,
null,
null,
null
]
}- cisco-products
· Publisher's source file
· Archived source file
· Official repository archive
· Original product package
· Original product package
Source location: CIE1000-LLDP-MIB::cie1000LldpConfigCdpAware.Source version and references
Published package: Cisco IE1000-MIBS IE1000_MIBs; file: IE1000-MIBS/IE1000_MIBs.7z/CIE1000-LLDP-MIB.mib.
Same file in Cisco STRATIX2500-MIBS Stratix2500_MIBs.
Downloaded: 2026-10-21T03:34:10.601538+00:00. SHA-256:
eefc1f39f80d773d072fd09cd3c6472bb69ecc70a85fb96c08282fe4fc0beb22{'kind': 'OBJECT-TYPE', 'details': {'module': 'CIE1000-LLDP-MIB', 'imports': {'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue'], 'CIE1000-TC': ['CIE1000DisplayString', 'CIE1000Integer64', 'CIE1000InterfaceIndex', 'CIE1000RowEditorState', 'CIE1000Unsigned16', 'CIE1000Unsigned64', 'CIE1000Unsigned8'], 'SNMPv2-SMI': ['NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'CISCO-IE1000-MIB': ['cie1000SwitchMgmt']}, 'document': {'software': 'Cisco IE1000-MIBS', 'original_name': 'IE1000-MIBS/IE1000_MIBs.7z/CIE1000-LLDP-MIB.mib', 'release_sha256': 'fdd5f5f181891a7352b13a73b80cbb24bb2c5ecb0d6d4fd22fc945100c43a009', 'release_version': 'IE1000_MIBs'}, 'smi_kind': 'OBJECT-TYPE', 'definition': 'cie1000LldpConfigCdpAware OBJECT-TYPE\n SYNTAX TruthValue\n MAX-ACCESS read-write\n STATUS current\n DESCRIPTION\n "Enables/disables CDP awareness for the interface.\n \n CDP is Cisco\'s equivalent to LLDP.\n \n \n \n The CDP operation is restricted to decoding incoming CDP frames (The\n switch doesn\'t transmit CDP frames). CDP frames are only decoded if\n LLDP on the port is enabled.\n \n \n \n Only CDP TLVs that can be mapped to a corresponding field in the LLDP\n neighbors\' table are decoded. All other TLVs are discarded\n (Unrecognized CDP TLVs and discarded CDP frames are not shown in the\n LLDP statistics.).\n \n CDP TLVs are mapped onto LLDP neighbors\' table as shown below.\n \n CDP TLV \'Device ID\' is mapped to the LLDP \'Chassis ID\' field.\n \n CDP TLV \'Address\' is mapped to the LLDP \'Management Address\' field. The\n CDP address TLV can contain multiple addresses, but only the first\n address is shown in the LLDP neighbors table.\n \n CDP TLV \'Port ID\' is mapped to the LLDP \'Port ID\' field.\n \n CDP TLV \'Version and Platform\' is mapped to the LLDP \'System\n Description\' field.\n \n Both the CDP and LLDP support \'system capabilities\', but the CDP\n capabilities cover capabilities that are not part of the LLDP. These\n capabilities are shown as \'others\' in the LLDP neighbors\' table.\n \n \n \n If all ports have CDP awareness disabled the switch forwards CDP frames\n received from neighbor devices. If at least one port has CDP awareness\n enabled all CDP frames are terminated by the switch.\n \n \n \n Note: When CDP awareness on a port is disabled the CDP information\n isn\'t removed immediately, but gets removed when the hold time is\n exceeded."\n ::= { cie1000LldpConfigEntry 4 }', 'syntax_tree': [['row', 'TruthValue'], None, ['MaxAccessPart', 'read-write'], ['Status', 'current'], ['DESCRIPTION', "Enables/disables CDP awareness for the interface. CDP is Cisco's equivalent to LLDP. The CDP operation is restricted to decoding incoming CDP frames (The switch doesn't transmit CDP frames). CDP frames are only decoded if LLDP on the port is enabled. Only CDP TLVs that can be mapped to a corresponding field in the LLDP neighbors' table are decoded. All other TLVs are discarded (Unrecognized CDP TLVs and discarded CDP frames are not shown in the LLDP statistics.). CDP TLVs are mapped onto LLDP neighbors' table as shown below. CDP TLV 'Device ID' is mapped to the LLDP 'Chassis ID' field. CDP TLV 'Address' is mapped to the LLDP 'Management Address' field. The CDP address TLV can contain multiple addresses, but only the first address is shown in the LLDP neighbors table. CDP TLV 'Port ID' is mapped to the LLDP 'Port ID' field. CDP TLV 'Version and Platform' is mapped to the LLDP 'System Description' field. Both the CDP and LLDP support 'system capabilities', but the CDP capabilities cover capabilities that are not part of the LLDP. These capabilities are shown as 'others' in the LLDP neighbors' table. If all ports have CDP awareness disabled the switch forwards CDP frames received from neighbor devices. If at least one port has CDP awareness enabled all CDP frames are terminated by the switch. Note: When CDP awareness on a port is disabled the CDP information isn't removed immediately, but gets removed when the hold time is exceeded."], None, None, None, None], 'source_encoding': 'utf-8-sig'}, 'parser_version': 'mib-4-q12+declaration-spans-2'}