This object indicates the current alarms status of the Optics layer. Alarms description : noDefect : No alarms highRXPwr : Input optical power reading over the fail-high threshold highTXPwr : Output optical power reading over the fail-high threshold lowRXPwr : Input optical power reading below the fail-low threshold lowTXPwr : Output optical power reading below the fail-low threshold lospRXPwr : Loss of optical power signal locRXPwr : Loss of optical continuity degLowGain : Amplifier gain degrade low degHighGain : Amplifier gain degrade high alsAmp : Amplifier automatic laser shutdown for safety reason aprAmp : Amplifier automatic power reduction noEqAutoAmp : Channels power not equalized for amplifier automatic control mode misAutoAmp : Misconfiguration for amplifier automatic control mode switchToProtect : Protected port switching to active role autoAmpliCtrlRunning : Amplifier automatic control mode algorithm running
Status in source: current.
Names: cooOtsController2AlarmState
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cooOtsController2AlarmState",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"noDefect",
"(",
"0",
")",
",",
"highRXPwr",
"(",
"1",
")",
",",
"highTXPwr",
"(",
"2",
")",
",",
"lowRXPwr",
"(",
"3",
")",
",",
"lowTXPwr",
"(",
"4",
")",
",",
"lospRXPwr",
"(",
"5",
")",
",",
"locRXPwr",
"(",
"6",
")",
",",
"degLowGain",
"(",
"7",
")",
",",
"degHighGain",
"(",
"8",
")",
",",
"alsAmp",
"(",
"9",
")",
",",
"aprAmp",
"(",
"10",
")",
",",
"noEqAutoAmp",
"(",
"11",
")",
",",
"misAutoAmp",
"(",
"12",
")",
",",
"switchToProtect",
"(",
"13",
")",
",",
"autoAmpliCtrlRunning",
"(",
"14",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the current alarms status of the Optics layer. Alarms description : noDefect : No alarms highRXPwr : Input optical power reading over the fail-high threshold highTXPwr : Output optical power reading over the fail-high threshold lowRXPwr : Input optical power reading below the fail-low threshold lowTXPwr : Output optical power reading below the fail-low threshold lospRXPwr : Loss of optical power signal locRXPwr : Loss of optical continuity degLowGain : Amplifier gain degrade low degHighGain : Amplifier gain degrade high alsAmp : Amplifier automatic laser shutdown for safety reason aprAmp : Amplifier automatic power reduction noEqAutoAmp : Channels power not equalized for amplifier automatic control mode misAutoAmp : Misconfiguration for amplifier automatic control mode switchToProtect : Protected port switching to active role autoAmpliCtrlRunning : Amplifier automatic control mode algorithm running\"",
"::=",
"{",
"cooOtsController2Entry",
"22",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"noDefect",
0
],
[
"highRXPwr",
1
],
[
"highTXPwr",
2
],
[
"lowRXPwr",
3
],
[
"lowTXPwr",
4
],
[
"lospRXPwr",
5
],
[
"locRXPwr",
6
],
[
"degLowGain",
7
],
[
"degHighGain",
8
],
[
"alsAmp",
9
],
[
"aprAmp",
10
],
[
"noEqAutoAmp",
11
],
[
"misAutoAmp",
12
],
[
"switchToProtect",
13
],
[
"autoAmpliCtrlRunning",
14
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the current alarms status of the Optics layer. Alarms description : noDefect : No alarms highRXPwr : Input optical power reading over the fail-high threshold highTXPwr : Output optical power reading over the fail-high threshold lowRXPwr : Input optical power reading below the fail-low threshold lowTXPwr : Output optical power reading below the fail-low threshold lospRXPwr : Loss of optical power signal locRXPwr : Loss of optical continuity degLowGain : Amplifier gain degrade low degHighGain : Amplifier gain degrade high alsAmp : Amplifier automatic laser shutdown for safety reason aprAmp : Amplifier automatic power reduction noEqAutoAmp : Channels power not equalized for amplifier automatic control mode misAutoAmp : Misconfiguration for amplifier automatic control mode switchToProtect : Protected port switching to active role autoAmpliCtrlRunning : Amplifier automatic control mode algorithm running"
],
null,
null,
null,
null
]
}- Cisco
· Publisher's source file
· Archived source file
Source location: CISCO-OPTICAL-OTS-MIB::cooOtsController2AlarmState.Source version and references
Downloaded: 2026-10-19T00:18:11.826519+00:00. SHA-256:
6a529a58138f5380fe48347ead131db7810f78bcff8cf6519c9c79cea93b2098{'kind': 'OBJECT-TYPE', 'details': {'module': 'CISCO-OPTICAL-OTS-MIB', 'imports': {'IF-MIB': ['ifIndex', 'ifName'], 'CISCO-SMI': ['ciscoMgmt'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'TimeStamp', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'CISCO-OPTICAL-MIB': ['CoiOpticalPower', 'CoiOpticalWavelength', 'CoiIntervalType', 'CoiOptAlarmType', 'CoiOptAlarmSeverity', 'CoiOptAlarmStatus', 'CoiOptAlarmServiceAffecting'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}, 'smi_kind': 'OBJECT-TYPE', 'definition': 'cooOtsController2AlarmState OBJECT-TYPE\n SYNTAX BITS {\n noDefect(0),\n highRXPwr(1),\n highTXPwr(2),\n lowRXPwr(3),\n lowTXPwr(4),\n lospRXPwr(5),\n locRXPwr(6),\n degLowGain(7),\n degHighGain(8),\n alsAmp(9),\n aprAmp(10),\n noEqAutoAmp(11),\n misAutoAmp(12),\n switchToProtect(13),\n autoAmpliCtrlRunning(14)\n }\n MAX-ACCESS read-only\n STATUS current\n DESCRIPTION\n "This object indicates the current alarms status of the Optics\n layer.\n Alarms description :\n noDefect : No alarms\n highRXPwr : Input optical power reading over the\n fail-high threshold\n highTXPwr : Output optical power reading over the\n fail-high threshold\n lowRXPwr : Input optical power reading below the\n fail-low threshold\n lowTXPwr : Output optical power reading below the\n fail-low threshold\n lospRXPwr : Loss of optical power signal\n locRXPwr : Loss of optical continuity\n degLowGain : Amplifier gain degrade low\n degHighGain : Amplifier gain degrade high\n alsAmp : Amplifier automatic laser shutdown for\n safety reason\n aprAmp : Amplifier automatic power reduction\n noEqAutoAmp : Channels power not equalized for\n amplifier\n automatic control mode\n misAutoAmp : Misconfiguration for amplifier automatic\n control mode\n switchToProtect : Protected port switching to active role\n autoAmpliCtrlRunning : Amplifier automatic control mode\n algorithm running"\n ::= { cooOtsController2Entry 22 }', 'syntax_tree': [['BITS', [['noDefect', 0], ['highRXPwr', 1], ['highTXPwr', 2], ['lowRXPwr', 3], ['lowTXPwr', 4], ['lospRXPwr', 5], ['locRXPwr', 6], ['degLowGain', 7], ['degHighGain', 8], ['alsAmp', 9], ['aprAmp', 10], ['noEqAutoAmp', 11], ['misAutoAmp', 12], ['switchToProtect', 13], ['autoAmpliCtrlRunning', 14]]], None, ['MaxAccessPart', 'read-only'], ['Status', 'current'], ['DESCRIPTION', 'This object indicates the current alarms status of the Optics layer. Alarms description : noDefect : No alarms highRXPwr : Input optical power reading over the fail-high threshold highTXPwr : Output optical power reading over the fail-high threshold lowRXPwr : Input optical power reading below the fail-low threshold lowTXPwr : Output optical power reading below the fail-low threshold lospRXPwr : Loss of optical power signal locRXPwr : Loss of optical continuity degLowGain : Amplifier gain degrade low degHighGain : Amplifier gain degrade high alsAmp : Amplifier automatic laser shutdown for safety reason aprAmp : Amplifier automatic power reduction noEqAutoAmp : Channels power not equalized for amplifier automatic control mode misAutoAmp : Misconfiguration for amplifier automatic control mode switchToProtect : Protected port switching to active role autoAmpliCtrlRunning : Amplifier automatic control mode algorithm running'], None, None, None, None], 'source_encoding': 'utf-8-sig'}, 'parser_version': 'mib-4'}