This attribute represents the desired target receive power level adjust for the selected NDR channel from the base target power reference level specified for the corresponding US RF port. The value represents power spectral density and is specified in units of TenthdB per 1.6 MHz of equivalent RF spectrum. The channel’s target receive power is computed by adding the value of this attribute to the value of base target power reference level for the corresponding RF port. This object specifies the commanded input power level for the NDR channel as specified in [R-OOB].
Status in source: current.
Names: docsRphyRpdDevNdrPowerAdjust
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"docsRphyRpdDevNdrPowerAdjust",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"UNITS",
[
"literal",
"2254656e746864426d5622"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute represents the desired target receive power level adjust for the selected NDR channel from the base target power reference level specified for the corresponding US RF port. The value represents power spectral density and is specified in units of TenthdB per 1.6 MHz of equivalent RF spectrum. The channel’s target receive power is computed by adding the value of this attribute to the value of base target power reference level for the corresponding RF port. This object specifies the commanded input power level for the NDR channel as specified in [R-OOB].\"",
"::=",
"{",
"docsRphyRpdDevNdrCfgEntry",
"12",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
[
"UNITS",
"TenthdBmV"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute represents the desired target receive power level adjust for the selected NDR channel from the base target power reference level specified for the corresponding US RF port. The value represents power spectral density and is specified in units of TenthdB per 1.6 MHz of equivalent RF spectrum. The channel’s target receive power is computed by adding the value of this attribute to the value of base target power reference level for the corresponding RF port. This object specifies the commanded input power level for the NDR channel as specified in [R-OOB]."
],
null,
null,
null,
null
]
}- Cisco
· Publisher's source file
· Archived source file
Source location: RPHY-NDF-NDR-MIB::docsRphyRpdDevNdrPowerAdjust.Source version and references
Downloaded: 2026-10-19T00:18:12.303890+00:00. SHA-256:
1340d92cafd316731c5ce690b2a5c2a2227977bf7184cd73528b808a0d6759e5{'kind': 'OBJECT-TYPE', 'details': {'module': 'RPHY-NDF-NDR-MIB', 'imports': {'CISCO-SMI': ['ciscoMgmt'], 'SNMPv2-TC': ['TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress']}, 'smi_kind': 'OBJECT-TYPE', 'definition': 'docsRphyRpdDevNdrPowerAdjust OBJECT-TYPE\n SYNTAX Integer32\n UNITS "TenthdBmV"\n MAX-ACCESS read-only\n STATUS current\n DESCRIPTION\n "This attribute represents the desired target receive power\n level adjust for the selected NDR channel from the base target\n power reference level specified for the corresponding US RF\n port. The value represents power spectral density and is\n specified in units of TenthdB per 1.6 MHz of equivalent RF\n spectrum. The channel’s target receive power is computed by\n adding the value of this attribute to the value of base target\n power reference level for the corresponding RF port. This object\n specifies the commanded input power level for the NDR channel as\n specified in [R-OOB]." \n ::= { docsRphyRpdDevNdrCfgEntry 12 }', 'syntax_tree': [['SimpleSyntax', 'Integer32'], ['UNITS', 'TenthdBmV'], ['MaxAccessPart', 'read-only'], ['Status', 'current'], ['DESCRIPTION', 'This attribute represents the desired target receive power level adjust for the selected NDR channel from the base target power reference level specified for the corresponding US RF port. The value represents power spectral density and is specified in units of TenthdB per 1.6 MHz of equivalent RF spectrum. The channel’s target receive power is computed by adding the value of this attribute to the value of base target power reference level for the corresponding RF port. This object specifies the commanded input power level for the NDR channel as specified in [R-OOB].'], None, None, None, None], 'source_encoding': 'utf-8-sig'}, 'parser_version': 'mib-4'}