Reference record for OID 1.3.6.1.4.1.9.9.862

ciscoGnssMIB

Status in source: unspecified.

Names: ciscoGnssMIB

{
  "smi_kind": "MODULE-IDENTITY",
  "definition": [
    "ciscoGnssMIB",
    "MODULE-IDENTITY",
    "LAST-UPDATED",
    [
      "literal",
      "223230313930393036303030305a22"
    ],
    "ORGANIZATION",
    "\"Cisco Systems, Inc.\"",
    "CONTACT-INFO",
    "\"Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-<list>@cisco.com\"",
    "DESCRIPTION",
    "\"The MIB module for GNSS Overview of GNSS GNSS (Global Navigation Satellite System) is used to describe the collection of Satellite Systems that are operating or planned. There are many Satellite constellation systems already available. These constellations allows ground base GNSS receivers to receive radio signals from these satellites and recover accurate location and time. Location and Time both are primary uses cases for many technologies, specifically for Telecom Network Operator, Timing use case is very important. Typical telecom networks synchronization works in a hierarchal manner where core network is connected to stratum 1 clock and the clock is distributed along the network in a tree like structure. With GPS receiver however, clocking can be changed to a flat architecture where access networks can directly take clock from satellites in sky using on-board GPS chips. MIB description This MIB is to support the GNSS feature of Cisco System devices. The below table specifies the object formats of the various textual conventions used. Data type mapping Textual Convention SYNTAX -------------------- ------------------ --------------------- RP state on slot SlotState OCTET UINT(SIZE(0..1)) RP Slot number SlotInfo OCTET UINT(SIZE(0..1)) GNSS module lock GnssModuleLockStatus OCTET INTEGER(1..2) GNSS module presens GnssModulePresenceStatus INTEGER(1..2)\"",
    "REVISION",
    [
      "literal",
      "223230313930353232303030305a22"
    ],
    "DESCRIPTION",
    "\"Latest version of this MIB module.\"",
    "::=",
    "{",
    "ciscoMgmt",
    "862",
    "}"
  ],
  "syntax_tree": [
    [
      "LAST-UPDATED",
      "201909060000Z"
    ],
    [
      "ORGANIZATION",
      "Cisco Systems, Inc."
    ],
    [
      "CONTACT-INFO",
      "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-<list>@cisco.com"
    ],
    [
      "DESCRIPTION",
      "The MIB module for GNSS Overview of GNSS GNSS (Global Navigation Satellite System) is used to describe the collection of Satellite Systems that are operating or planned. There are many Satellite constellation systems already available. These constellations allows ground base GNSS receivers to receive radio signals from these satellites and recover accurate location and time. Location and Time both are primary uses cases for many technologies, specifically for Telecom Network Operator, Timing use case is very important. Typical telecom networks synchronization works in a hierarchal manner where core network is connected to stratum 1 clock and the clock is distributed along the network in a tree like structure. With GPS receiver however, clocking can be changed to a flat architecture where access networks can directly take clock from satellites in sky using on-board GPS chips. MIB description This MIB is to support the GNSS feature of Cisco System devices. The below table specifies the object formats of the various textual conventions used. Data type mapping Textual Convention SYNTAX -------------------- ------------------ --------------------- RP state on slot SlotState OCTET UINT(SIZE(0..1)) RP Slot number SlotInfo OCTET UINT(SIZE(0..1)) GNSS module lock GnssModuleLockStatus OCTET INTEGER(1..2) GNSS module presens GnssModulePresenceStatus INTEGER(1..2)"
    ],
    [
      "Revisions",
      [
        [
          "201905220000Z",
          [
            "DESCRIPTION",
            "Latest version of this MIB module."
          ]
        ]
      ]
    ]
  ]
}

• Cisco MIB copies (LibreNMS/Observium Community) · Publisher's source file: CISCO-GNSS-MIB

  Vendor MIB copy from the LibreNMS archive. Cisco support.

  Module: CISCO-GNSS-MIB

  Published definition

  ciscoGnssMIB MODULE-IDENTITY
      LAST-UPDATED    "201909060000Z"
      ORGANIZATION    "Cisco Systems, Inc."
      CONTACT-INFO
              "Cisco Systems
              Customer Service
  
              Postal: 170 W Tasman Drive
              San Jose, CA  95134
              USA
  
              Tel: +1 800 553-NETS
  
              E-mail: cs-<list>@cisco.com"
      DESCRIPTION
          "The MIB module for GNSS
  
          Overview of GNSS
  
          GNSS (Global Navigation Satellite System) is used to describe
          the collection of Satellite Systems that are operating or
          planned. There are many Satellite constellation systems already
          available. These constellations allows ground base GNSS
          receivers to receive radio signals from these satellites and
          recover accurate location and time. Location and Time both are
          primary uses cases for many technologies, specifically for
          Telecom Network Operator, Timing use case is very important.
          Typical telecom networks synchronization works in a hierarchal
          manner where core network is connected to stratum 1 clock and
          the clock is distributed along the network in a tree like
          structure. With GPS receiver however, clocking can be changed to
          a flat architecture where access networks can directly take
          clock from satellites in sky using on-board GPS chips.
  
  
          MIB description
  
          This MIB is to support the GNSS feature of Cisco System devices.
  
          The below table specifies the object formats of the various
          textual conventions used.
  
          Data type mapping     Textual Convention  SYNTAX
          --------------------  ------------------  ---------------------
          RP state on slot    SlotState      OCTET
          UINT(SIZE(0..1))
          RP Slot number      SlotInfo       OCTET UINT(SIZE(0..1))
          GNSS module lock    GnssModuleLockStatus   OCTET
          INTEGER(1..2)
          GNSS module presens GnssModulePresenceStatus   INTEGER(1..2)"
      REVISION        "201905220000Z"
      DESCRIPTION
          "Latest version of this MIB module."
      ::= { ciscoMgmt 862 }

  Module imports

  {'CISCO-SMI': ['ciscoMgmt'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP']}

  Related source files and packages:

  • LibreNMS original distribution archiveFile: librenms/librenms/tar.gz/…; 80.2 MiB
  • Archive revision metadata: librenms/librenms (JSON)File: repos/librenms/librenms/commits/master; 36,945 bytes
  
  Source location: CISCO-GNSS-MIB::ciscoGnssMIB.
  Source version and references

  Downloaded: 2026-10-24T02:14:04.407446+00:00.

• Cisco MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

  Vendor MIB copy from the Observium Community archive. Cisco support.

  Module: CISCO-GNSS-MIB

  Published definition

  ciscoGnssMIB MODULE-IDENTITY
      LAST-UPDATED    "201909060000Z"
      ORGANIZATION    "Cisco Systems, Inc."
      CONTACT-INFO
              "Cisco Systems
              Customer Service
  
              Postal: 170 W Tasman Drive
              San Jose, CA  95134
              USA
  
              Tel: +1 800 553-NETS
  
              E-mail: cs-<list>@cisco.com"
      DESCRIPTION
          "The MIB module for GNSS
  
          Overview of GNSS 
  
          GNSS (Global Navigation Satellite System) is used to describe
          the collection of Satellite Systems that are operating or
          planned. There are many Satellite constellation systems already
          available. These constellations allows ground base GNSS
          receivers to receive radio signals from these satellites and
          recover accurate location and time. Location and Time both are
          primary uses cases for many technologies, specifically for
          Telecom Network Operator, Timing use case is very important.
          Typical telecom networks synchronization works in a hierarchal
          manner where core network is connected to stratum 1 clock and
          the clock is distributed along the network in a tree like
          structure. With GPS receiver however, clocking can be changed to
          a flat architecture where access networks can directly take
          clock from satellites in sky using on-board GPS chips.
  
  
          MIB description
  
          This MIB is to support the GNSS feature of Cisco System devices.
  
          The below table specifies the object formats of the various
          textual conventions used.
  
          Data type mapping     Textual Convention  SYNTAX
          --------------------  ------------------  ---------------------
          RP state on slot    SlotState      OCTET
          UINT(SIZE(0..1))
          RP Slot number      SlotInfo       OCTET UINT(SIZE(0..1))
          GNSS module lock    GnssModuleLockStatus   OCTET
          INTEGER(1..2)
          GNSS module presens GnssModulePresenceStatus   INTEGER(1..2)"
      REVISION        "201905220000Z"
      DESCRIPTION
          "Latest version of this MIB module."
      ::= { ciscoMgmt 862 }

  Module imports

  {'CISCO-SMI': ['ciscoMgmt'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP']}

  Related source files and packages:

  • Observium Community original distribution archivePublisher Last-Modified: Tue, 05 May 2026 13:47:48 GMT; 127.4 MiB
  
  Source location: CISCO-GNSS-MIB::ciscoGnssMIB.
  Source version and references

  Downloaded: 2026-10-24T02:14:08.257395+00:00.