{1 3 6 1 4 1 9 9 9998 1 1 4 1 1 3}
This object indicates the load balancing mode enabled on the controller for this WLAN . A value of 'none' indicates Load Balance is turned off for this Wlan. A value of 'clientCount' indicates load balance is based on AP client count scheme. And a value of 'uplinkUsage' indicates load balance is based on AP uplink usage scheme.
Status in source: current.
Names: clExtWlanLoadBalancingMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"clExtWlanLoadBalancingMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"none",
"(",
"0",
")",
",",
"uplinkUsage",
"(",
"1",
")",
",",
"clientCount",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the load balancing mode enabled on the controller for this WLAN . A value of 'none' indicates Load Balance is turned off for this Wlan. A value of 'clientCount' indicates load balance is based on AP client count scheme. And a value of 'uplinkUsage' indicates load balance is based on AP uplink usage scheme.\"",
"DEFVAL",
"{",
"clientCount",
"}",
"::=",
"{",
"clExtWlanConfigEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"none",
0
],
[
"uplinkUsage",
1
],
[
"clientCount",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the load balancing mode enabled on the controller for this WLAN . A value of 'none' indicates Load Balance is turned off for this Wlan. A value of 'clientCount' indicates load balance is based on AP client count scheme. And a value of 'uplinkUsage' indicates load balance is based on AP uplink usage scheme."
],
null,
null,
null,
[
"DEFVAL",
"clientCount"
]
]
}Vendor MIB copy from the Observium Community archive. Cisco support.
Module: CISCO-LWAPP-EXT-MIB
clExtWlanLoadBalancingMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
uplinkUsage(1),
clientCount(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the load balancing mode enabled
on the controller for this WLAN . A value of 'none'
indicates Load Balance is turned off for this Wlan.
A value of 'clientCount' indicates load balance is based
on AP client count scheme. And a value of 'uplinkUsage'
indicates load balance is based on AP uplink usage scheme."
DEFVAL { clientCount }
::= { clExtWlanConfigEntry 3 }{'IF-MIB': ['ifIndex'], 'CISCO-SMI': ['ciscoMgmt'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'CISCO-LWAPP-AP-MIB': ['cLApSysMacAddress', 'cLApDot11IfSlotId', 'cLApIfSmtDot11Bssid', 'cLApLastRebootReason', 'cLApDataEncryptionStatus', 'cLApName', 'cLApIfSmtDot11Bssid', 'cLApEthernetIfSlotId', 'cLApDot11RadioCurrentChannel', 'cLApRSSI', 'cLApDot11RadioMACAddress', 'cLApDot11RadioChannelNumber'], 'CISCO-LWAPP-RF-MIB': ['cLRFProfileName'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'CISCO-LWAPP-SYS-MIB': ['clsPortDot1dBasePort'], 'CISCO-LWAPP-WLAN-MIB': ['cLWlanIndex', 'cLWlanSsid'], 'CISCO-LWAPP-DOT11-MIB': ['cldHtDot11nBand'], 'AIRESPACE-WIRELESS-MIB': ['bsnDot11EssSecurityAuthType'], 'CISCO-LWAPP-DOT11-CLIENT-MIB': ['cldcClientMacAddress', 'cldcApMacAddress', 'cldcClientSSID']}Related source files and packages:
Downloaded: 2026-10-24T02:14:08.672390+00:00.
Vendor MIB copy from the Netdisco archive.
Module: CISCO-LWAPP-EXT-MIB
clExtWlanLoadBalancingMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
uplinkUsage(1),
clientCount(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the load balancing mode enabled
on the controller for this WLAN . A value of 'none'
indicates Load Balance is turned off for this Wlan.
A value of 'clientCount' indicates load balance is based
on AP client count scheme. And a value of 'uplinkUsage'
indicates load balance is based on AP uplink usage scheme."
DEFVAL { clientCount }
::= { clExtWlanConfigEntry 3 }{'IF-MIB': ['ifIndex'], 'CISCO-SMI': ['ciscoMgmt'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'CISCO-LWAPP-AP-MIB': ['cLApSysMacAddress', 'cLApDot11IfSlotId', 'cLApIfSmtDot11Bssid', 'cLApLastRebootReason', 'cLApDataEncryptionStatus', 'cLApName', 'cLApIfSmtDot11Bssid', 'cLApEthernetIfSlotId', 'cLApDot11RadioCurrentChannel', 'cLApRSSI', 'cLApDot11RadioMACAddress', 'cLApDot11RadioChannelNumber'], 'CISCO-LWAPP-RF-MIB': ['cLRFProfileName'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'CISCO-LWAPP-SYS-MIB': ['clsPortDot1dBasePort'], 'CISCO-LWAPP-WLAN-MIB': ['cLWlanIndex', 'cLWlanSsid'], 'CISCO-LWAPP-DOT11-MIB': ['cldHtDot11nBand'], 'AIRESPACE-WIRELESS-MIB': ['bsnDot11EssSecurityAuthType'], 'CISCO-LWAPP-DOT11-CLIENT-MIB': ['cldcClientMacAddress', 'cldcApMacAddress', 'cldcClientSSID']}Related source files and packages:
Downloaded: 2026-10-24T15:28:09.217010+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.9998.1.1.4.1.1.1 | clExtWlanAdminStatus | 0 | 0 | |
| 1.3.6.1.4.1.9.9.9998.1.1.4.1.1.2 | clExtWlanBroadcastSsidEnable | 0 | 0 | |
| 1.3.6.1.4.1.9.9.9998.1.1.4.1.1.4 | clExtWlanP2PBlocking | 0 | 0 | |
| 1.3.6.1.4.1.9.9.9998.1.1.4.1.1.5 | clExtWlanSecurityAuthType | 0 | 0 | |
| 1.3.6.1.4.1.9.9.9998.1.1.4.1.1.6 | clExtWlanDot11Auth | 0 | 0 | |
| 1.3.6.1.4.1.9.9.9998.1.1.4.1.1.7 | clExtWlanSecurity | 0 | 0 | |
| 1.3.6.1.4.1.9.9.9998.1.1.4.1.1.8 | clExtWlanAuthenMode | 0 | 0 | |
| 1.3.6.1.4.1.9.9.9998.1.1.4.1.1.9 | clExtWlanSecurityCiphers | 0 | 0 | |
| 1.3.6.1.4.1.9.9.9998.1.1.4.1.1.10 | clExtWepCipherKeyIndex | 0 | 0 | |
| 1.3.6.1.4.1.9.9.9998.1.1.4.1.1.11 | clExtWepCipherKeyValue | 0 | 0 | |
| 1.3.6.1.4.1.9.9.9998.1.1.4.1.1.12 | clExtWepCipherKeyCharType | 0 | 0 |