OID reference
1.3.6.1.4.1.930.2.1.2.5
Identification
{1 3 6 1 4 1 930 2 1 2 5}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Description 2
Parsed from CENTILLION-CONFIG-MIB.mib · CENTILLION-CONFIG-MIB
Source file: Download ccfg210.mib · Publisher's file
Vendor MIB copy from the Netdisco archive.
Related source files and packages:
Source file: Download CENTILLION-CONFIG-MIB · Publisher's file
Vendor MIB copy from the Observium Community archive. Nortel support.
Related source files and packages:
Source file: Download CENTILLION-CONFIG-MIB.mib
Source file: Download ccfg209.mib.txt
Source file: Download ccfg203.mib.txt
Source file: Download ccfg202.mib.txt
Source file: Download ccfg200.mib.txt
Source file: Download CCFG208.MIB.txt
Source file: Download Ccfg201.mib.txt
Source file: Download centillion.mib.txt
Source file: Download ccfg210.mib.txt
Historical records
rifTable OBJECT-TYPE
SYNTAX SEQUENCE OF RifEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains Routing Information Field (RIF)
parameters. Entries may be used by one or more stations on
the switch."
::= { sysConfig 5 }
rifTable OBJECT-TYPE
SYNTAX SEQUENCE OF RifEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains Routing Information Field (RIF)
parameters. Entries may be used by one or more stations on
the switch."
::= { sysConfig 5 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.930.2.1.2.5.1 | rifEntry | 7 | 7 | A single entry in the RIF table. |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.930.2.1.2.1 | sysTableConfig | 0 | 0 | |
| 1.3.6.1.4.1.930.2.1.2.2 | sysImgInfo | 2 | 10 | |
| 1.3.6.1.4.1.930.2.1.2.3 | sysMcpRedundInfo | 2 | 10 | |
| 1.3.6.1.4.1.930.2.1.2.6 | systemMaxPacketInfoSize | 1 | 1 | The system maximum packet information field size. Changing the maximum information size does not take effect until the next syste… |
| 1.3.6.1.4.1.930.2.1.2.7 | systemConfigMode | 1 | 1 | This variable describes the current mode of bridging configuration in the switch. The bridging mode applies to all ports. The val… |
| 1.3.6.1.4.1.930.2.1.2.8 | maxPerfMode | 1 | 1 | The current value of the system maximum performance mode. Setting this value to enabled causes the system to perform in maximum p… |
| 1.3.6.1.4.1.930.2.1.2.10 | configSave | 1 | 1 | Save the current configuration into flash memory. When read, this value is always clear (1). The value may only be set to the set… |
| 1.3.6.1.4.1.930.2.1.2.11 | filterGroup | 5 | 46 | |
| 1.3.6.1.4.1.930.2.1.2.12 | localAdminMacAddress | 1 | 1 | The system's locally administered MAC address. The current operation MAC address may be obtained by the ifPhysAddress entry in th… |
| 1.3.6.1.4.1.930.2.1.2.13 | configLogin | 1 | 1 | The system login object. This object is used to login a network management station to the system for configuration. The format of… |
| 1.3.6.1.4.1.930.2.1.2.14 | sysNetProtocol | 1 | 25 | |
| 1.3.6.1.4.1.930.2.1.2.15 | configProtocol | 1 | 1 | The protocol used to retrieve system configuration. Flash indicates that the configuration is read from the flash. tftpNoSave ind… |
| 1.3.6.1.4.1.930.2.1.2.16 | configFilename | 1 | 1 | The name of the configuration file that is sent to the server. The actual boot protocol used to retrieve the file is determined b… |
| 1.3.6.1.4.1.930.2.1.2.17 | configSource | 1 | 1 | An indication of how the system was actually configured. flashConfig indicates that the current configuration was obtained via fl… |
| 1.3.6.1.4.1.930.2.1.2.18 | sysTFTPGroup | 5 | 10 | |
| 1.3.6.1.4.1.930.2.1.2.19 | sysSNMPGroup | 4 | 11 | |
| 1.3.6.1.4.1.930.2.1.2.20 | sysMgmtRingNumber | 1 | 1 | A unique ring number assigned to the system's managment entity. This ring will not appear as a source-route hop as it is seen onl… |
| 1.3.6.1.4.1.930.2.1.2.21 | netbiosGroup | 5 | 31 | |
| 1.3.6.1.4.1.930.2.1.2.22 | fdbGroup | 5 | 37 | |
| 1.3.6.1.4.1.930.2.1.2.23 | virtualSegmentGroup | 4 | 25 | |
| 1.3.6.1.4.1.930.2.1.2.24 | bridgeGroup | 3 | 20 | |
| 1.3.6.1.4.1.930.2.1.2.25 | lnmGroup | 4 | 8 | |
| 1.3.6.1.4.1.930.2.1.2.28 | sonmpTrConfig | 1 | 1 | The configuration status of the Token Ring auto-topology. If the value of this object is set to enable(1), the Token Ring auto-to… |
| 1.3.6.1.4.1.930.2.1.2.29 | systemConfigIpOption | 1 | 1 | Reading this object always returns other(1). Setting of this object, which is optional, must be accomplished in the same SNMP re… |
| 1.3.6.1.4.1.930.2.1.2.30 | sonmpTrSpeed | 1 | 1 | The Token Ring topology message (SONMP frame) transmit speed. The values that are read/write are: topFast(2)...short interval bet… |
| 1.3.6.1.4.1.930.2.1.2.31 | vlan | 4 | 45 | |
| 1.3.6.1.4.1.930.2.1.2.32 | srUnknownFrameFlood | 1 | 1 | Unknown Source Route Frame Flood. Enable/Disable flooding of Source Route Frames to the next hop while the route to the remote ri… |
| 1.3.6.1.4.1.930.2.1.2.33 | srbIeeeBpduEnable | 1 | 1 | Send Srb/Ieee BPDU as explorer. Enable/Disable the sending of Srb/IEEE BPDU's as explorers, allowing some routers to receive the … |
| 1.3.6.1.4.1.930.2.1.2.34 | tbRifProxyEnable | 1 | 1 | Process route descriptor LE_ARP requests in token ring transparent bridging LANE. Enable/Disable the processing of LE_ARP request… |
| 1.3.6.1.4.1.930.2.1.2.35 | cpuClkRate | 1 | 1 | MCP Clock Rate. Indicates the speed at which the MCP processor functions. |
| 1.3.6.1.4.1.930.2.1.2.36 | maxRids | 1 | 1 | Maximum number of Reassembly Ids. Indicates the maximum number of RIDs the switch supports. Determined by the XRam installed on t… |