Objects in COSINE-ORION-MIB

OID records

OIDNameDescription
1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2csOrionFwHttpPolicyTableThis table specifies individual Http Policies. The Fw Access
Table identifies the specific policies to apply to specific
Http connections.
1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.4csOspfIfMetricValueThe metric of using this type of service on
this interface. The default value of the TOS 0
Metric is 10^8 / ifSpeed.
1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.15csBgpGenClearConnFlagThis object is used to indicate the set of BGP connections
that need to be cleared. If set to 'nbr' the 'csBgpNbrClearConn'
attribute must be set. If set to 'nbr…
1.3.6.1.4.1.3085.3.1.7.2.1.2csOrionFanStateA fan operational state.
1.3.6.1.4.1.3085.3.1.7.2.1.3csOrionFanSpeedA fan speed (in RPS: Revolutions Per Second).
1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1.1csVpnVrfRouteTargetTypeThe type of Route Target entry.
1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1.2csVpnVrfRouteTargetValueThe route target value. It is an extended community
encoded as an 8-byte value. An extended community is
specified either as <4-byte-ip-address>:<2-byte num>
or …
1.3.6.1.4.1.3085.3.1.6.5.13.1.4csOrionIpSecStateProtocolThe protocol being used by this SA. This value is
connected to General Access list protocol.
1.3.6.1.4.1.3085.3.1.3.3.1.1.1.15csOc3ApsActivePort, csOc3ApsForceForce protection switch. When set to 'forceToSwitch' it
switches the active port between the two internal ports
indicated by csOc3ApsActivePort object.
NOTE: Thi…
1.3.6.1.4.1.3085.3.1.4.2.6.2.1.4csOrionVPNVRouterTcpConnRemAddressThe remote IP address for this TCP connection.
1.3.6.1.4.1.3085.3.1.4.2.6.2.1csOrionVPNVRouterTcpConnEntryThe addressing information for one of this
Orion's IP addresses.
1.3.6.1.4.1.3085.3.1.4.2.3.6.1.6csOrionVPNVRouterManagedIpRouteIfIndexThe index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particula…
1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.4csOrionFwFtpAuthServersThe authentication server address used by proxy to connect to.
1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.5csOrionTraceRouteReqStatusThis object is used to store the status of the Trace Route request.
operation. The csOrionTraceRouteResultTable should only be
evaluated after this object yields…
1.3.6.1.4.1.3085.3.1.1.1.7csOrionPowerSupplyStatusChangeThis trap indicates one of the power supplies has
changed state. The following events are reported:

supplyModuleInserted (1)
supplyModuleRemoved (2)
inputVoltageR…
1.3.6.1.4.1.3085.3.1.3.3.5.2.1.7csOc3PathIntervalFCsThe counter associated with the number of
failure counts
encountered by a Path in a
particular 15-minute interval
in the past 24 hours.
1.3.6.1.4.1.3085.3.1.2.3.3.1.4csOrionSystemLoginDomainInterfaceListList of interfaces which an user can access. The interfaces
in the list are separated either by space(s).

Each interface is represented as follows:
[/[:channel-…
1.3.6.1.4.1.3085.3.1.4.2.3.2csOrionVPNVRouterIpAddrTableThe table of addressing information relevant to
Orion's IP addresses.
1.3.6.1.4.1.3085.3.1.4.2.3.5csOrionIpLocalAddrPoolTableThis table contains pools of IP addresses. Clients can
dynamically take addresses from a pool as they need them
(and return them when finished).
1.3.6.1.4.1.3085.3.1.4.2.3.6csOrionVPNVRouterManagedIpRouteTableThe table of addressing information relevant to
Orion's managed IP addresses.
1.3.6.1.4.1.3085.3.1.4.2.9.1.6.1.1csIsisExpPolIdThe Export Policy (see the corresponding entry in
csExpPolTable) that is applied to this Virtual Router.
1.3.6.1.4.1.3085.3.1.5.3.1csOrionQueueGroupTableA list of group of queues found in every blade
1.3.6.1.4.1.3085.3.1.6.5.13.1.5csOrionIpSecStatePortThe port number of the protocol; this value is connected
to General Access list port number.
1.3.6.1.4.1.3085.3.1.3.5.9.1.29csAtmConnTransmitDroppedPktsThe counter indicates the total number of packets (OAM/RAW/data) packets dropped or aborted on ATM VC
1.3.6.1.4.1.3085.3.1.3.2.10csUnchanDs3ConfigTableThe Unchannelized DS3 configuration table.
1.3.6.1.4.1.3085.3.1.3.2.2csDs3Ds1ConfigTableThe DS3 DS1 configuration table. This is used to
configure each of the DS1 connections within a complete DS3.
1.3.6.1.4.1.3085.3.1.3.2.2.1.1csDs3Ds1IdThis identifies a single DS1 within a complete DS3.
1.3.6.1.4.1.3085.3.1.3.2.2.1.11csDs3Ds1LoopbackTypeThis object represents the desired loopback configuration
of the DS1 interface. This variable will be interpreted
only when csDs3Ds1LoopbackDestination is set to…
1.3.6.1.4.1.3085.3.1.3.2.2.1.12csDs3Ds1LoopbackStatusThis variable represents the current state of the
loopback on the DS1 interface. It contains
information about loopbacks established by a
manager and remotely fr…
1.3.6.1.4.1.3085.3.1.3.2.2.1.14csDs3Ds1LineStatusThis variable represents DS1/E1 transmit and
receive line status.

The various bit positions are:
BIT(0) not used
BIT(1) ds1NoAlarm
BIT(2) ds1RcvFarEndLOF
BIT(3) …
1.3.6.1.4.1.3085.3.1.3.2.2.1.15csDs3E1IntBitsThis variable is used to configure the 2-bits international bits
for the E1 interface. NOTE: This is applicable only for E1.
1.3.6.1.4.1.3085.3.1.3.2.2.1.16csDs3E1NatBitsThis 4-bit object is added for the E1 sub-multiframe
aligned national bit codeword configuration.
NOTE: This is applicable only for E1.
1.3.6.1.4.1.3085.3.1.3.2.2.1.2csDs3Ds1FramingThis object specifies the framing
used on the DS1 assigned to this channel.
1.3.6.1.4.1.3085.3.1.3.2.2.1.3csDs3Ds1YellowAlarmDetectThis object specifies whether Yellow Alarm detection
is active on the DS1 assigned to this channel.
1.3.6.1.4.1.3085.3.1.3.2.2.1.4csDs3Ds1YellowAlarmGenThis object specifies whether Yellow Alarm
generation is active on the DS1 assigned to this
channel. NOTE: This is applicable only for T1.
1.3.6.1.4.1.3085.3.1.3.2.2.1.5csDs3Ds1LineCodeThis object specifies the variety of Zero Code Suppression
used on the on the DS1 assigned to this channel.
NOTE: This is applicable only for T1.
1.3.6.1.4.1.3085.3.1.3.2.2.1.6csDs3Ds1InvertDataThis object specifies whether the 'invert data' feature
is enabled on the DS1 assigned to this channel. This
feature must be enabled if the Line Code parameter
(…
1.3.6.1.4.1.3085.3.1.3.2.2.1.7csDs3Ds1ClockSourceThis object specifies the source of the Transmit Clock
used on the DS1 assigned to this channel. If this
object is set to internal(1), a local clock source
is us…
1.3.6.1.4.1.3085.3.1.3.2.2.1.8csDs3Ds1FdlThis is used to enable/disable 1 second transmission
of performance reports via ANSI 403 FDL. If this is
disabled, the AT&T 54016 version of FDL is used. Note,
…
1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.10csMplsInterfaceAttribFlagsUsed to set the user-specified attribute flags for the interface
1.3.6.1.4.1.3085.3.1.6.1.6.1.1csOrionNumericListTypeThe match type for this entry:
port: this numeric list represents a list of ports.
1.3.6.1.4.1.3085.3.1.6.1.6.1csOrionNumericListEntryEach entry specifies a single numeric specification: a discreet
integer or a range of contiguous integers.
1.3.6.1.4.1.3085.3.1.6.14.2.1csExpFilterTableThis table is used to filter MPLS EXP bits.
1.3.6.1.4.1.3085.3.1.6.14.2.1.1.2csExpFilterMatchingExpThe EXP value to filter.
1.3.6.1.4.1.3085.3.1.6.14.2.1.1.5csExpFilterColorMeteringModeUsed to activate metering.
1.3.6.1.4.1.3085.3.1.6.14.2.1.1.6csExpFilterDropPrecedenceUsed to specify the drop precedence to use.
1.3.6.1.4.1.3085.3.1.6.14.2.1.1.7csExpFilterRowStatusA row status type for this table
1.3.6.1.4.1.3085.3.1.6.5.13.1.12csOrionIpSecStateSATypeThe type of this SA.
1.3.6.1.4.1.3085.3.1.7.5.1.5csOrionFanTrayFWReleaseThe firmware release of the fan tray controller.
1.3.6.1.4.1.3085.3.1.7.5.1csOrionFanTrayControlEntryAn entry containing PIC H/W and F/W Revision information applicable
to fan tray controllers.