Objects in COSINE-ORION-MIB

OID records

OIDNameDescription
1.3.6.1.4.1.3085.3.1.6.5.10.1.3csOrionIKEStatsPhase1InPktsThe number of IKE phase 1 packets received in this
Virtual Interface.
1.3.6.1.4.1.3085.3.1.6.17.3.1.1.14csPppoeAcIfStatPppAuthFailsThis object contains the number of PPP authentication failures for sessions created on
PPPoE AC.
1.3.6.1.4.1.3085.3.1.2.6.1.1.5csOrionFileSysReqStatusThis object is used to store the status of the File System request.
operation. For 'dir' operation, csOrionFileSysResultTable should
only be evaluated after this…
1.3.6.1.4.1.3085.3.1.1.1.12csOrionOspfIfStateChangeAn csOspfIfStateChange trap signifies that there
has been a change in the state of a non-virtual
OSPF interface. This trap should be generated
when the interfa…
1.3.6.1.4.1.3085.3.1.6.5.9.1.25csOrionIpSecStatsEspDecryptPktsOkThe number of good ESP decrypted packets in this
Virtual Interface.
1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.1csOrionTraceRouteReqIndexThis object identifies a specific Trace Route request entry.
NMSs are expected to come up with a unique ID each request.
This ID will also be used to index the T…
1.3.6.1.4.1.3085.3.1.6.15.1.1.1.4csOrionVrDhcpRelayAdminStatusThis object indicates the desired state of the DHCP
relay agent. A relay agent, once enabled, requires
at least one DHCP server address to forward packets
to.

If …
1.3.6.1.4.1.3085.3.1.4.2.2.3.1.4csOrionGreCheckSumThis object is used to enable/disable the checksum mechanism
for this GRE Tunnel.
1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.28csPwVcForwardPEProcessor engine number of the data forwarding processor engine.
0 means not set.
1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.3csPwVcOutboundGroupIDUsed in the outbound Group ID field within the 'Virtual
Circuit FEC Element' when some control methods (for example
LDP) is used for VC setup, zero if not used.
1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.34csPwVcCustomerNameCustomer name field.
1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.4csPwVcInboundGroupIDObtained from the inbound Group ID field in the remote
'Virtual Circuit FEC Element' as received by control methods
are used for VC setup, zero if not used or no…
1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.8csPwVcPeerIpv6AddrIf csPwVcPeerAddrType is set to ipV6(2), then this value will
contain the Ipv6 address of the peer node PW/PE signaling
entity. This object is otherwise insignif…
1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.9csPwVcOutboundVcLabelThe VC label used in the outbound direction. It may be set
up manually if owner is 'manual' or automatically otherwise.
Examples: For MPLS PSN, it represents the…
1.3.6.1.4.1.3085.3.1.5.3.3.1.10csOrionQueueMaxThresholdMax threshold to discarding packets (red, yellow and green).
Represented as the percentage of the queue size, 256KB.
1.3.6.1.4.1.3085.3.1.6.5.5.1.1csOrionIKEPolicyNameThe name assigned to this set of IKE Policies.
1.3.6.1.4.1.3085.3.1.6.17.3.1.1.21csPppoeAcIfStatGenericErrorReceiveThis object contains the number of PPPoE Generic-Error tags
received by this PPPoE AC.
1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.28csMplsPathIdentifierPath-option explicit-path identifier
1.3.6.1.4.1.3085.3.1.3.3.2.1.1.1csOc3SectionCurrentStatusThis variable indicates the status of the interface.
The sonetSectionCurrentStatus is a bit map represented
as a sum, therefore, it can represent multiple defect…
1.3.6.1.4.1.3085.3.1.6.3.1.1.2csOrionVrPktFilterAclIdThe Id of an access list entry (from csOrionGenAclTable).
All packets transmitted or received on any of the virtual
interfaces on this virtual router that satisf…
1.3.6.1.4.1.3085.3.1.6.3.1.1.8csOrionVrPktFilterCounterStatusThe status of csOrionVrPktFilterHitCounter. Will also be enabled
as a result of enabling csOrionVrPktFilterEvlogStatus.
1.3.6.1.4.1.3085.3.1.5.2.1.16csOrionEngineApplicationProductA textual string containing information about the
application.
1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.3csOrionFwSmtpPolicyInternalMailHubThe default internal mail hub for email to go to if
the destination mail for the protected domain(see ..).
1.3.6.1.4.1.3085.3.1.5.2.1.5csOrionEngineTypeA type of the process engine.
1.3.6.1.4.1.3085.3.1.5.2.1.19csOrionEngineApplicationTimeA textual string containing information about the
time of the application.
1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.8csOrionFwAccessPolicyThis is the name of the policy to be applied to any connection
that matches the Source Id, Destination Id, and Protocol defined
in this entry. The definition of…
1.3.6.1.4.1.3085.3.1.3.2.3.1.3csChDs3ChNumber, csChDs3PortIndexThis object identifies the location of the Ds3 Port on the
blade identified by csChDs3SlotIndex. Together with
csChDs3SlotIndex, it uniquely identifies a physic…
1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.9csIgmpInterfaceVersion1QuerierTimerThe time remaining until the host assumes that there are no
IGMPv1 routers present on the interface. While this is non-
zero, the host will reply to all queries…
1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.7csRtPolicyPrefixListRowStatusThe RowStatus object for this table. This is used to
add/delete rows from this table.
1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.4csOrionFwMsSqlPolicyRemotePortThe internal Microsoft SQL or Sybase server's port number.
1.3.6.1.4.1.3085.3.1.1.1.37csOrionLossOfFrameA csOrionLossOfFrame trap signifies that a physical port
on a blade experiencing loss of Frame(LOF) on the line.
Applicable to both DS3 and OC3.
1.3.6.1.4.1.3085.3.1.2.3.1.1.6csOrionSystemLoginOperStatusA operational status for this table entry.
1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.1csExpPolIdThis object identifies a specific Export Policy entry.
1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.11csExpPolMetricThe metric to assign to packets matching this policy.

The value -1 indicates this parameter has not been set.
1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.13csExpPolBgpCommunity1The BGP Community parameter 1. Refer to RFC1997.
The following values are not allowed in the configuration:
0 through 0x0000FFFF and 0xFFFF0000 through 0xFFFFFFF…
1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.14csExpPolBgpCommunity2Same description as csExpPolBgpCommunity1
1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.5csExpPolEgpASIf a route was added via EGP, this object is the AS number
of the EGP peer.

The value -1 represents a wildcard for this Import Policy
parameter.
1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.7csExpPolExtRteTagIf the route was added via OSPF External, this is the
eter
The value -1 represents a wildcard for this Import Policy
parameter.
1.3.6.1.4.1.3085.3.1.6.12.1.1.1csOrionFRoIPVIfaceId
1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.2csMplsInterfaceLabelRangeThis object specifies the type of Labels that are being
use for interface specific label space configuration
information. Value of this object is significant onl…
1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.6csMplsInterfaceLabelMaxOutThis object specifies the upper limit of the label range
to be used in outgoing packets
over this interface. This object specifies configuration
information for i…
1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.11csOspfNbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighbor
1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.2csOspfNbrAddressLessIndexOn an interface having an IP Address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.
On row creation, …
1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.8csOspfNbrLsRetransQLenThe current length of the retransmission
queue.
1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.9csOspfNbmaNbrStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is im…
1.3.6.1.4.1.3085.3.1.5.2.1.8csOrionEngineTemperatureA temperature (in Fahrenheit or Celsius near
the specified Engine.

NOTE: This object is not used.
1.3.6.1.4.1.3085.3.1.6.19csOrionNBNSInfo
1.3.6.1.4.1.3085.3.1.6.20csOrionSpfInfo
1.3.6.1.4.1.3085.3.1.6.12.1.1.3csOrionFRoIPConfDefaultWindowSize
1.3.6.1.4.1.3085.3.1.6.12.1.1.7csOrionFRoIPAdminStatus