Objects in TIMESTEP-IPSEC-MIB

OID records

OIDNameDescription
1.3.6.1.4.1.1022.10.1.1.8.2.1.2ipsecNotifyMessageCountThe total number of times the specific notify message
has been received or sent by the entity since system
boot.
1.3.6.1.4.1.1022.10.1.1.8.2.1ipsecNotifyCountEntryAn entry (conceptual row) containing the total number of
occurrences of a notify message.
1.3.6.1.4.1.1022.10.1.1.3.1.4ipsecSaOutboundEspSpiThe value of the SPI for the outbound SA that provides
the ESP security service, or zero if ESP is not used.
1.3.6.1.4.1.1022.10.1.1.3.1ipsecSaEntryAn entry (conceptual row) containing the information on
a particular IPSec SA.
1.3.6.1.4.1.1022.10.1.1.2.1.4ipsecTunnelLocalAddressOrStartThe address of or the start address (if an address
range) of the local endpoint of the tunnel, or 0.0.0.0 if
unknown or if the SA uses transport mode encapsulati…
1.3.6.1.4.1.1022.10.1.1.2.1ipsecTunnelEntryAn entry (conceptual row) containing the information on
a particular configured tunnel.
1.3.6.1.4.1.1022.10.1.1.2.1.9ipsecTunnelLocalPortThe number of the local port that this tunnel carries,
or 0 if it carries any port number.
1.3.6.1.4.1.1022.10.1.1.3ipsecSaTableThe (conceptual) table containing information on IPSec
SAs.
1.3.6.1.4.1.1022.10.1.1.3.1.1ipsecSaIndexA unique value, greater than zero, for each IPSec SA. It
is recommended that values are assigned contiguously
starting from 1.
1.3.6.1.4.1.1022.10.1.1.3.1.10ipsecSaTimeLimitThe maximum lifetime in seconds of the SA, or 0 if there
is no time constraint on its expiration.
1.3.6.1.4.1.1022.10.1.1.3.1.11ipsecSaTrafficLimitThe maximum traffic in 1024-byte blocks that the SA is
allowed to support, or 0 if there is no traffic
constraint on its expiration.
1.3.6.1.4.1.1022.10.1.1.3.1.12ipsecSaInboundTrafficThe amount traffic measured in bytes handled by the SA
in the inbound direction.
1.3.6.1.4.1.1022.10.1.1.3.1.13ipsecSaOutboundTrafficThe amount traffic measured in bytes handled by the SA
in the outbound direction.
1.3.6.1.4.1.1022.10.1.1.3.1.14ipsecSaInboundPacketsThe number of packets handled by the SA in the inbound
direction.
1.3.6.1.4.1.1022.10.1.1.3.1.15ipsecSaOutboundPacketsThe number of packets handled by the SA in the outbound
direction.
1.3.6.1.4.1.1022.10.1.1.3.1.16ipsecSaDecryptErrorsThe number of inbound packets discarded by the SA due to
decryption errors.
1.3.6.1.4.1.1022.10.1.1.3.1.17ipsecSaAuthErrorsThe number of inbound packets discarded by the SA due to
authentication errors. This includes hash failures in
both ESP and AH.
1.3.6.1.4.1.1022.10.1.1.3.1.18ipsecSaReplayErrorsThe number of inbound packets discarded by the SA due to
replay errors. This includes replay failures both ESP and
AH.
1.3.6.1.4.1.1022.10.1.1.3.1.19ipsecSaOtherReceiveErrorsThe number of inbound packets discarded by the SA due to
errors other than decryption, authentication or replay
errors. This may include decompression errors or …
1.3.6.1.4.1.1022.10.1.1.3.1.2ipsecSaTunnelThe value of the index into the IPSec SA tunnel table
that this SA supports (ipsecTunnelIndex).
1.3.6.1.4.1.1022.10.1.1.3.1.20ipsecSaSendErrorsThe number of outbound packets discarded by the SA due
to any error. This may include compression errors or
errors due to a lack of transmit buffers.
1.3.6.1.4.1.1022.10.1.1.3.1.3ipsecSaInboundEspSpiThe value of the SPI for the inbound SA that provides
the ESP security service, or zero if ESP is not used.
1.3.6.1.4.1.1022.10.1.1.3.1.5ipsecSaInboundAhSpiThe value of the SPI for the inbound SA that provides
the AH security service, or zero if AH is not used.
1.3.6.1.4.1.1022.10.1.1.3.1.6ipsecSaOutboundAhSpiThe value of the SPI for the outbound SA that provides
the AH security service, or zero if AH is not used.
1.3.6.1.4.1.1022.10.1.1.3.1.7ipsecSaInboundCompCpiThe value of the CPI for the inbound SA that provides IP
compression, or zero if IPCOMP is not used.
1.3.6.1.4.1.1022.10.1.1.3.1.8ipsecSaOutboundCompCpiThe value of the CPI for the outbound SA that provides
IP compression, or zero if IPCOMP is not used.
1.3.6.1.4.1.1022.10.1.1.3.1.9ipsecSaCreationTimeThe date and time that the current SA was set up.
1.3.6.1.4.1.1022.10ipsecMIBThe MIB module to describe generic IPSec objects,
transient and permanent virtual tunnels created by IPSec
SAs, and entity level IPSec objects and events.
1.3.6.1.4.1.1022.10.1ipsecMIBObjects
1.3.6.1.4.1.1022.10.1.1ipsec
1.3.6.1.4.1.1022.10.1.1.1.1.43ipsecIkeSaIpsecAuthErrorsThe total number of inbound packets discarded by all
IPSec SAs due to authentication errors. This includes
hash failures in IPSec SAs using ESP and AH.

If this is…
1.3.6.1.4.1.1022.10.1.1.1.1ipsecIkeSaEntryAn entry (conceptual row) containing the information on
a particular IKE SA.
1.3.6.1.4.1.1022.10.1.1.7.5ipsecTotalTransInboundPacketsThe total number of inbound packets carried on transient
IPSec tunnels since boot time.
1.3.6.1.4.1.1022.10.1.1.7ipsecTransTunStats
1.3.6.1.4.1.1022.10.1.1.2.1.27ipsecTunnelPolicyErrorsThe total number of inbound packets discarded by this
virtual tunnel due to policy errors. This includes errors
in all transforms if SA bundles are used.

Policy e…
1.3.6.1.4.1.1022.10.1.1.2.1.29ipsecTunnelSendErrorsThe total number of outbound packets discarded by this
virtual tunnel due to any error. This may include packets
dropped due to a lack of transmit buffers.

If thi…
1.3.6.1.4.1.1022.10.1.1.1.1.25ipsecIkeSaOutboundTrafficThe amount traffic measured in bytes handled in the
current SA in the outbound direction.
1.3.6.1.4.1.1022.10.1.1.7.2ipsecCurrentTransIkeTunnelsThe number of transient phase 1 tunnels in the entity
that are up and available for use at this moment in
time.
1.3.6.1.4.1.1022.10.1.1.9.1ipsecUnknownSpiErrorsThe total number of packets received by the entity since
boot time with SPIs or CPIs that were not valid.
1.3.6.1.4.1.1022.10.1.1.9ipsecErrorStats
1.3.6.1.4.1.1022.10.1.1.2.1.21ipsecTunnelTotalOutboundTrafficThe total amount of traffic measured in bytes handled in
the tunnel in the outbound direction. In other words, it
is the aggregate value of all inbound traffic c…
1.3.6.1.4.1.1022.10.1.1.1.1.29ipsecIkeSaFirstTimeStartThe data and time that this virtual tunnel was
originally set up.

It is not the time that the current SA was set up.

If this is a permanent virtual tunnel, it is …
1.3.6.1.4.1.1022.10.1.1.1.1.39ipsecIkeSaIpsecOutboundTrafficThe total amount of outbound traffic measured in bytes
handled by all IPSec SAs set up by phase 1 SAs supporting
this tunnel.

If this is a permanent virtual tunne…
1.3.6.1.4.1.1022.10.1.1.1.1.45ipsecIkeSaIpsecOtherReceiveErrorsThe total number of inbound packets discarded by all
IPSec SAs due to errors other than authentication,
decryption or replay errors. This may include packets
drop…
1.3.6.1.4.1.1022.10.1.1.1.1.14ipsecIkeSaDifHelGroupDescA unique value representing the Diffie-Hellman group
description used or 0 if the group is unknown.

Specific values are used as described in the ISAKMP Class
Valu…
1.3.6.1.4.1.1022.10.1.1.4.0.1ipsecTrapPermIkeNegFailureAn attempt to negotiate a phase 1 SA for the specified
permanent IKE tunnel failed.
1.3.6.1.4.1.1022.10.1.1.4.0ipsecTrapsObjects
1.3.6.1.4.1.1022.10.1.1.1.1.5ipsecIkeSaPeerIdTypeThe type of ID used by the peer.

Specific values are used as described in Section 4.6.2.1
of [IPDOI].
1.3.6.1.4.1.1022.10.1.1.1.1.22ipsecIkeSaTimeLimitThe maximum lifetime in seconds of the current SA
supporting the virtual tunnel, or 0 if there is no time
constraint on its expiration.
1.3.6.1.4.1.1022.10.1.1.2ipsecTunnelTableThe (conceptual) table containing information on IPSec
SA-based tunnels.