The address of or the start address (if an address
range) of the local endpoint of the tunnel, or 0.0.0.0 if
unknown or if the SA uses transport mode encapsulation.
Parsed from file TIMESTEP-IPSEC-MIB.mib
Module: TIMESTEP-IPSEC-MIB
Vendor: TimeStep Corp.
Module: TIMESTEP-IPSEC-MIB
[Automatically extracted from oidview.com]
ipsecTunnelLocalAddressOrStart OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of or the start address (if an address range) of the local endpoint of the tunnel, or 0.0.0.0 if unknown or if the SA uses transport mode encapsulation." ::= { ipsecTunnelEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1022.10.1.1.2.1.1 | ipsecTunnelIndex | 0 | 0 | A unique value, greater than zero, for each tunnel interface. It is recommended that values are assigned contiguously starting f… |
1.3.6.1.4.1.1022.10.1.1.2.1.2 | ipsecTunnelIkeSa | 0 | 0 | The value of the index into the IKE SA tunnel table that created this tunnel (ipsecIkeSaIndex), or 0 if the tunnel is created by … |
1.3.6.1.4.1.1022.10.1.1.2.1.3 | ipsecTunnelType | 0 | 0 | The type of the virtual tunnel represented by this row. 'static' means that the tunnel is supported by a single static IPSec SA t… |
1.3.6.1.4.1.1022.10.1.1.2.1.5 | ipsecTunnelLocalAddressMaskOrEnd | 0 | 0 | The mask of or the end address (if an address range) of the local endpoint of the tunnel, or 0.0.0.0 if unknown or if the SA uses… |
1.3.6.1.4.1.1022.10.1.1.2.1.6 | ipsecTunnelRemoteAddressOrStart | 0 | 0 | The address of or the start address (if an address range) of the remote endpoint of the tunnel, or 0.0.0.0 if unknown or if the S… |
1.3.6.1.4.1.1022.10.1.1.2.1.7 | ipsecTunnelRemoteAddressMaskOrEnd | 0 | 0 | The mask of or the end address (if an address range) of the remote endpoint of the tunnel, or 0.0.0.0 if unknown or if the SA use… |
1.3.6.1.4.1.1022.10.1.1.2.1.8 | ipsecTunnelProtocol | 0 | 0 | The number of the protocol that this tunnel carries, or 0 if it carries any protocol. |
1.3.6.1.4.1.1022.10.1.1.2.1.9 | ipsecTunnelLocalPort | 0 | 0 | The number of the local port that this tunnel carries, or 0 if it carries any port number. |
1.3.6.1.4.1.1022.10.1.1.2.1.10 | ipsecTunnelRemotePort | 0 | 0 | The number of the remote port that this tunnel carries, or 0 if it carries any port number. |
1.3.6.1.4.1.1022.10.1.1.2.1.11 | ipsecTunnelMode | 0 | 0 | The type of encapsulation used by this virtual tunnel. |
1.3.6.1.4.1.1022.10.1.1.2.1.12 | ipsecTunnelEspEncAlg | 0 | 0 | A unique value representing the encryption algorithm applied to traffic carried by this SA if it uses ESP or 0 if there is no enc… |
1.3.6.1.4.1.1022.10.1.1.2.1.13 | ipsecTunnelEspEncKeyLength | 0 | 0 | The length of the encryption key in bits used for the algorithm specified in the ipsecTunnelEspEncAlg object, or 0 if the key len… |
1.3.6.1.4.1.1022.10.1.1.2.1.14 | ipsecTunnelEspAuthAlg | 0 | 0 | A unique value representing the hash algorithm applied to traffic carried by this SA if it uses ESP or 0 if there is no authentic… |
1.3.6.1.4.1.1022.10.1.1.2.1.15 | ipsecTunnelAhAuthAlg | 0 | 0 | A unique value representing the hash algorithm applied to traffic carried by this SA if it uses AH or 0 if AH is not used. Specifi… |
1.3.6.1.4.1.1022.10.1.1.2.1.16 | ipsecTunnelCompAlg | 0 | 0 | A unique value representing the compression algorithm applied to traffic carried by this SA if it uses IPCOMP. Specific values ar… |
1.3.6.1.4.1.1022.10.1.1.2.1.17 | ipsecTunnelStartTime | 0 | 0 | The date and time that this virtual tunnel was set up. If this is a permanent virtual tunnel, it is reset when the number of curr… |
1.3.6.1.4.1.1022.10.1.1.2.1.18 | ipsecTunnelCurrentSaNum | 0 | 0 | The number of current SAs set up to support this virtual tunnel. If this number is 0, the tunnel must be considered down. Also if … |
1.3.6.1.4.1.1022.10.1.1.2.1.19 | ipsecTunnelTotalSaNum | 0 | 0 | The total number of SAs, including all current SAs, that have been set up to support this virtual tunnel. |
1.3.6.1.4.1.1022.10.1.1.2.1.20 | ipsecTunnelTotalInboundTraffic | 0 | 0 | The total amount of traffic measured in bytes handled in the tunnel in the inbound direction. In other words, it is the aggregate… |
1.3.6.1.4.1.1022.10.1.1.2.1.21 | ipsecTunnelTotalOutboundTraffic | 0 | 0 | The total amount of traffic measured in bytes handled in the tunnel in the outbound direction. In other words, it is the aggregat… |
1.3.6.1.4.1.1022.10.1.1.2.1.22 | ipsecTunnelTotalInboundPackets | 0 | 0 | The total number of packets handled in the tunnel in the inbound direction. In other words, it is the aggregate value of all inbo… |
1.3.6.1.4.1.1022.10.1.1.2.1.23 | ipsecTunnelTotalOutboundPackets | 0 | 0 | The total number of packets handled in the tunnel in the outbound direction. In other words, it is the aggregate value of all out… |
1.3.6.1.4.1.1022.10.1.1.2.1.24 | ipsecTunnelDecryptErrors | 0 | 0 | The total number of inbound packets discarded by this virtual tunnel due to decryption errors in ESP. If this is a permanent virt… |
1.3.6.1.4.1.1022.10.1.1.2.1.25 | ipsecTunnelAuthErrors | 0 | 0 | The total number of inbound packets discarded by this virtual tunnel due to authentication errors. This includes hash failures in… |
1.3.6.1.4.1.1022.10.1.1.2.1.26 | ipsecTunnelReplayErrors | 0 | 0 | The total number of inbound packets discarded by this virtual tunnel due to replay errors. This includes replay failures in IPSec… |
1.3.6.1.4.1.1022.10.1.1.2.1.27 | ipsecTunnelPolicyErrors | 0 | 0 | The total number of inbound packets discarded by this virtual tunnel due to policy errors. This includes errors in all transforms… |
1.3.6.1.4.1.1022.10.1.1.2.1.28 | ipsecTunnelOtherReceiveErrors | 0 | 0 | The total number of inbound packets discarded by this virtual tunnel due to errors other than decryption, authentication or repla… |
1.3.6.1.4.1.1022.10.1.1.2.1.29 | ipsecTunnelSendErrors | 0 | 0 | The total number of outbound packets discarded by this virtual tunnel due to any error. This may include packets dropped due to a… |