Objects in TIMETRA-PORT-MIB

OID records

OIDNameDescription
1.3.6.1.4.1.6527.3.1.2.2.7.8tmnxPortNotifyEtherAlarmReasonUsed by tmnx ethernet Port Notifications, the value of
tmnxPortNotifyEtherAlarmReason indicates the reason a ethernet port
alarm has been raised.
1.3.6.1.4.1.6527.3.1.2.2.4.11.1.15tmnxDS3ChannelMDLFicStringtmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the
Message Data Link (MDL).
1.3.6.1.4.1.6527.3.1.2.2.4.14.1.1tmnxBundleBundleIDtmnxBundleBundleID identifies this multilink bundle. The value of
this object is calculated using the TiMOS encoding scheme described
in TmnxBundleID.
tmnxBundleB…
1.3.6.1.4.1.6527.3.1.2.2.4.22.1.13tmnxBundleMemberImaFeUnavailSecstmnxBundleMemberImaFeUnavailSecs indicates the number
of unavailable seconds at the near-end.
1.3.6.1.4.1.6527.3.1.2.2.4.2tmnxPortTableThe port table has an entry for each port on each IOM card in each
chassis in the TMNX system.
1.3.6.1.4.1.6527.3.1.2.2.12.2.1tmnxPortNetEgressStatsEntryDefines an entry in tmnxPortNetEgressStatsTable. Entries are
created and deleted by the system depending on the queue policy
being used at the specific port.
1.3.6.1.4.1.6527.3.1.2.2.9.1.1.4tmnxFRDlcmiT392DcetmnxFRDlcmiT392Dce is used to configure the polling verification
timer for the Frame Relay DCE interface.
1.3.6.1.4.1.6527.3.1.1.2.2.1.5.1tmnxPortComp7710V3v0The compliance statement for revision 3.0 of TIMETRA-PORT-MIB.
1.3.6.1.4.1.6527.3.1.2.2.4.14.1.6tmnxBundleNumActiveLinkstmnxBundleNumActiveLinks indicates the current number of active links
belonging to this bundle.
1.3.6.1.4.1.6527.3.1.2.2.4.23.1.4tmnxDS1PortLineLengthtmnxDS1PortLineLength configuration only applies to a ds1 port
configured with a 'short' buildout. tmnxDS1PortLineLength configures
the length of the line (in f…
1.3.6.1.4.1.6527.3.1.2.2.4.4.1.26tmnxPortEtherReasonDownFlagsThe tmnxPortEtherReasonDownFlags indicates why an ethernet port may
be in the operationally 'down' state. The following reasons are
detected through this object:
…
1.3.6.1.4.1.6527.3.1.2.2.12.4tmnxMcMlpppStatsTableDefines the Alcatel 7x50 SR series Multiclass MLPPP
statistics table for providing the capability of
retrieving the traffic statistics for the physical queues
bei…
1.3.6.1.4.1.6527.3.1.3.2.2.0.12tmnxPortNotifyBerSdTcaGenerated when a SONET/SDH port's signal degradation bit error
rate is greater than the configured error rate threshold.

This notification was made obsolete in …
1.3.6.1.4.1.6527.3.1.2.2.4.3.1.1tmnxPortTestStateThe current testing status of this port.
1.3.6.1.4.1.6527.3.1.2.2.4.22.1.26tmnxBundleMemberImaOifAnomaliestmnxBundleMemberImaOifAnomalies indicates the number
of OIF anomalies at the near-end.
1.3.6.1.4.1.6527.3.1.2.2.4.17.1.25tmnxPortIngrMdaQos12StatDropPktstmnxPortIngrMdaQos12StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload conditi…
1.3.6.1.4.1.6527.3.1.2.2.4.31.1.39tmnxDDMFailedThresholdsThe value of tmnxDDMFailedThresholds indicates which objects
of the monitored SFP/XFP is in a failed or cleared threshold state.
A set bit indicates that the spe…
1.3.6.1.4.1.6527.3.1.2.2.4.31.1.1tmnxDDMTemperatureThe value of tmnxDDMTemperature indicates the current temperature
of the SFP/XFP in degrees Celsius.
1.3.6.1.4.1.6527.3.1.2.2.4.2.1.42tmnxPortAlarmStateThe value of tmnxPortAlarmState indicates the current alarm
state for this port.
1.3.6.1.4.1.6527.3.1.1.2.2.2.29tmnxPortEthernetV3v0GroupThe group of objects supporting management of Ethernet ports
for revision 3.0 on Alcatel 7x50 SR series systems.
1.3.6.1.4.1.6527.3.1.2.2.4.11.1.11tmnxDS3ChannelBERTPatterntmnxDS3ChannelBERTPattern indicates the pattern used for the
Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration
indicates the duration of the te…
1.3.6.1.4.1.6527.3.1.2.2.11tmnxATMObjs
1.3.6.1.4.1.6527.3.1.2.2.4.9.1.6tmnxPortFCStatsIngDroInProfPktsThe number of in-profile packets (rate below CIR)
dropped by the ingress Qchip due to: MBS exceeded,
buffer pool limit exceeded, etc.
1.3.6.1.4.1.6527.3.1.2.2.10.2.1.7tmnxObjectAppSlopePolicytmnxObjectAppSlopePolicy specifies the slope policy being used for
this pool. The Slope policies define the nature of the RED Slopes for
the high and the low pri…
1.3.6.1.4.1.6527.3.1.2.2.4.9.1.15tmnxPortFCStatsEgrDroOutProfPktsThe number of out-of-profile packets (rate above CIR)
dropped by the egress Qchip due to: MBS exceeded,
buffer pool limit exceeded, etc.
1.3.6.1.4.1.6527.3.1.2.2.4.22.1.4tmnxBundleMemberImaFeRxStatetmnxBundleMemberImaFeRxState indicates the state of far-end
receive IMA link.
1.3.6.1.4.1.6527.3.1.2.2.4.24.1.13tmnxPortSchedOverrideLvl5PIRThe value of tmnxPortSchedOverrideLvl5PIR specifies the total
bandwidth limit, PIR, for priority level 5. This object
overrides TIMETRA-QOS-MIB::tPortSchedulerPl…
1.3.6.1.4.1.6527.3.1.2.2.4.23.1tmnxDS1PortEntryEach row entry represents a physical DS1 port on a
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries …
1.3.6.1.4.1.6527.3.1.2.2.4.21.1.21tmnxBundleImaGrpTxOamLablValtmnxBundleImaGrpTxOamLablVal specifies near-end value
to be transmitted.
1.3.6.1.4.1.6527.3.1.2.2.4.21.1.10tmnxBundleImaGrpSmFailStatetmnxBundleImaGrpSmFailState specifies the current state
of the IMA Group.
1.3.6.1.4.1.6527.3.1.2.2.4.22.1.2tmnxBundleMemberImaNeRxStatetmnxBundleMemberImaNeRxState indicates the state of near-end
receive IMA link.
1.3.6.1.4.1.6527.3.1.2.2.4.24.1.10tmnxPortSchedOverrideLvl3CIRThe value of tmnxPortSchedOverrideLvl3CIR specifies the within-cir
bandwidth limit for priority level 3. This object overrides
TIMETRA-QOS-MIB::tPortSchedulerPlc…
1.3.6.1.4.1.6527.3.1.2.2.7.6tmnxPortNotifyDS1AlarmReasonUsed by tmnx DS1 Port Notifications, the value of
tmnxPortNotifyDS1AlarmReason indicates the reason a DS1 interface
alarm has been raised.
1.3.6.1.4.1.6527.3.1.2.2.4.6tmnxSonetPathTableThe tmnxSonetPathTable has an entry for each sonet path
configured in each packet over Sonet port on each IOM card
in each chassis in the TMNX system.
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3tmnxSonetPathMTUThe size of the largest packet which can be sent/received
on the sonet path, specified in octets. For paths that
are used for transmitting network datagrams, th…
1.3.6.1.4.1.6527.3.1.2.2.4.23.1.2tmnxDS1PortLastChangeTimeThe tmnxDS1PortLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxDS1PortEntry row for this port.
1.3.6.1.4.1.6527.3.1.2.2.4.17.1.20tmnxPortIngrMdaQos09StatDropOctstmnxPortIngrMdaQos09StatDropOcts indicates the number of
octets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload conditio…
1.3.6.1.4.1.6527.3.1.3.2.2tmnxPortNotifyPrefix
1.3.6.1.4.1.6527.3.1.2.2.4.4.1.14tmnxPortEtherIngressRateThe tmnxPortEtherIngressRate variable specifies the maximum ingress
bandwidth (in mega-bits per second) that the Ethernet interface
can receive. A value of -1 me…
1.3.6.1.4.1.6527.3.1.2.2.4.13.1tmnxDS0ChanGroupEntryEach row entry represents one or more DS0 channels on a
DS1 interface. tmnxDS0ChanGroupTimeSlots object is used to add or
remove DS0 channels from the group.

En…
1.3.6.1.4.1.6527.3.1.2.2.4.11.1.21tmnxDS3ChannelFEACLoopRespondWhen tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel
is enabled to respond to remote loop signals. When it has
a value of 'false' the port will…
1.3.6.1.4.1.6527.3.1.2.2.9.1.1.9tmnxFRDlcmiRxStatusMsgstmnxFRDlcmiRxStatusMsgs indicates the number of LMI Status
messages received on this Frame Relay interface.
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.21tmnxDS1SignalModeThe value of tmnxDS1SignalMode indicates the type of signalling
associated with the channel:
none - Indicates no signalling on this channel.
cas - Indicates Ch…
1.3.6.1.4.1.6527.3.1.2.2.12tmnxPortStatsObjs
1.3.6.1.4.1.6527.3.1.2.2.4.31.1.15tmnxDDMTxBiasCurrentHiAlarmThe value of tmnxDDMTxBiasCurrentHiAlarm indicates the Transmit
Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a
hi-alarm.
1.3.6.1.4.1.6527.3.1.2.2.4.11.1.31tmnxDS3ChannelBERTOperStatustmnxDS3ChannelBERTOperStatus indicates the status of the BERT test
as specified by TmnxDSXBertOperStatus.
1.3.6.1.4.1.6527.3.1.2.2.4.31.1.52tmnxDDMExtCalVoltageSlopeThe value of tmnxDDMExtCalVoltageSlope indicates the V(Slope)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2.
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.8tmnxDS1BERTPatterntmnxDS1BERTPattern object indicates the pattern used for the
Bit Error Rate Test (BERT). The value of tmnxDS1BERTDuration
indicates the duration of the test.
Sett…
1.3.6.1.4.1.6527.3.1.2.2.4.5.1.23tmnxSonetMonK2ByteThe tmnxSonetMonK1Byte variable reports the Automatic Protection
Switching(APS) signalling status from the K2 byte in the SONET
Line Overhead Header.
1.3.6.1.4.1.6527.3.1.1.2.2.2.39tmnxPortGroupV5v0The group of objects supporting management of physical port
capabilities for revision 5.0 on Alcatel 7x50 SR series systems.