This object contains the ifIndex value of the physical
interface row entry whose parameters are to be adjusted.
Upon setting this object to the ifIndex value of a
physical interface, the following interface objects values
are copied to this entry:
docsIfUpChannelFrequency,
docsIfUpChannelWidth,
docsIfUpChannelModulationProfile,
docsIfUpChannelSlotSize,
docsIfUpChannelRangingBackoffStart,
docsIfUpChannelRangingBackoffEnd,
docsIfUpChannelTxBackoffStart,
docsIfUpChannelTxBackoffEnd,
docsIfUpChannelScdmaActiveCodes,
docsIfUpChannelScdmaCodesPerSlot,
docsIfUpChannelScdmaFrameSize,
docsIfUpChannelScdmaHoppingSeed,
docsIfUpChannelType, and
docsIfUpChannelPreEqEnable
Setting this object to the value of a non-existent or
a temporary upstream interface returns the error
'wrongValue'.
This object MUST contain a value of zero for physical
interfaces entries.
Setting this object in row entries that correspond to
physical interfaces returns the error 'wrongValue'.
Parsed from file DOCS-IF-MIB.mib
Module: DOCS-IF-MIB
This object contains the ifIndex value of the physical
interface row entry whose parameters are to be adjusted.
Upon setting this object to the ifIndex value of a
physical interface, the following interface objects values
are copied to this entry:
docsIfUpChannelFrequency,
docsIfUpChannelWidth,
docsIfUpChannelModulationProfile,
docsIfUpChannelSlotSize,
docsIfUpChannelRangingBackoffStart,
docsIfUpChannelRangingBackoffEnd,
docsIfUpChannelTxBackoffStart,
docsIfUpChannelTxBackoffEnd,
docsIfUpChannelScdmaActiveCodes,
docsIfUpChannelScdmaCodesPerSlot,
docsIfUpChannelScdmaFrameSize,
docsIfUpChannelScdmaHoppingSeed,
docsIfUpChannelType, and
docsIfUpChannelPreEqEnable
Setting this object to the value of a non-existent or
a temporary upstream interface returns the error
'wrongValue'.
This object MUST contain a value of zero for physical
interfaces entries.
Setting this object in row entries that correspond to
physical interfaces returns the error 'wrongValue'.
docsIfUpChannelCloneFrom OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Intended for use when a temporary inactive upstream table row is
created for the purpose of manipulating SCDMA parameters for an
active row. Refer to the descriptions of docsIfUpChannelStatus
and docsIfUpChannelUpdate for details of this procedure.
This object contains the ifIndex value of the active upstream
row whose SCDMA parameters are to be adjusted.
Although this object was created to facilitate SCDMA parameter
adjustment, it may also be used at the vendors discretion for
non-SCDMA parameter adjustment.
This object must contain a value of zero for active upstream rows."
View at oid-info.com
This object contains the ifIndex value of the physical
interface row entry whose parameters are to be adjusted.
Upon setting this object to the ifIndex value of a
physical interface, the following interface objects values
are copied to this entry:
docsIfUpChannelFrequency,
docsIfUpChannelWidth,
docsIfUpChannelModulationProfile,
docsIfUpChannelSlotSize,
docsIfUpChannelRangingBackoffStart,
docsIfUpChannelRangingBackoffEnd,
docsIfUpChannelTxBackoffStart,
docsIfUpChannelTxBackoffEnd,
docsIfUpChannelScdmaActiveCodes,
docsIfUpChannelScdmaCodesPerSlot,
docsIfUpChannelScdmaFrameSize,
docsIfUpChannelScdmaHoppingSeed,
docsIfUpChannelType, and
docsIfUpChannelPreEqEnable
Setting this object to the value of a non-existent or
a temporary upstream interface returns the error
'wrongValue'.
This object MUST contain a value of zero for physical
interfaces entries.
Setting this object in row entries that correspond to
physical interfaces returns the error 'wrongValue'.
Parsed from file DOCS-IF-MIB.txt
Company: None
Module: DOCS-IF-MIB
This object contains the ifIndex value of the physical
interface row entry whose parameters are to be adjusted.
Upon setting this object to the ifIndex value of a
physical interface, the following interface objects values
are copied to this entry:
docsIfUpChannelFrequency,
docsIfUpChannelWidth,
docsIfUpChannelModulationProfile,
docsIfUpChannelSlotSize,
docsIfUpChannelRangingBackoffStart,
docsIfUpChannelRangingBackoffEnd,
docsIfUpChannelTxBackoffStart,
docsIfUpChannelTxBackoffEnd,
docsIfUpChannelScdmaActiveCodes,
docsIfUpChannelScdmaCodesPerSlot,
docsIfUpChannelScdmaFrameSize,
docsIfUpChannelScdmaHoppingSeed,
docsIfUpChannelType, and
docsIfUpChannelPreEqEnable
Setting this object to the value of a non-existent or
a temporary upstream interface returns the error
'wrongValue'.
This object MUST contain a value of zero for physical
interfaces entries.
Setting this object in row entries that correspond to
physical interfaces returns the error 'wrongValue'.
docsIfUpChannelCloneFrom OBJECT-TYPE SYNTAX InterfaceIndexOrZero ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the ifIndex value of the physical interface row entry whose parameters are to be adjusted. Upon setting this object to the ifIndex value of a physical interface, the following interface objects values are copied to this entry: docsIfUpChannelFrequency, docsIfUpChannelWidth, docsIfUpChannelModulationProfile, docsIfUpChannelSlotSize, docsIfUpChannelRangingBackoffStart, docsIfUpChannelRangingBackoffEnd, docsIfUpChannelTxBackoffStart, docsIfUpChannelTxBackoffEnd, docsIfUpChannelScdmaActiveCodes, docsIfUpChannelScdmaCodesPerSlot, docsIfUpChannelScdmaFrameSize, docsIfUpChannelScdmaHoppingSeed, docsIfUpChannelType, and docsIfUpChannelPreEqEnable Setting this object to the value of a non-existent or a temporary upstream interface returns the error 'wrongValue'. This object MUST contain a value of zero for physical interfaces entries. Setting this object in row entries that correspond to physical interfaces returns the error 'wrongValue'." ::= { docsIfUpstreamChannelEntry 16 }
docsIfUpChannelCloneFrom OBJECT-TYPE SYNTAX InterfaceIndexOrZero ACCESS read-write STATUS mandatory DESCRIPTION "This object contains the ifIndex value of the physical interface row entry whose parameters are to be adjusted. Upon setting this object to the ifIndex value of a physical interface, the following interface objects values are copied to this entry: docsIfUpChannelFrequency, docsIfUpChannelWidth, docsIfUpChannelModulationProfile, docsIfUpChannelSlotSize, docsIfUpChannelRangingBackoffStart, docsIfUpChannelRangingBackoffEnd, docsIfUpChannelTxBackoffStart, docsIfUpChannelTxBackoffEnd, docsIfUpChannelScdmaActiveCodes, docsIfUpChannelScdmaCodesPerSlot, docsIfUpChannelScdmaFrameSize, docsIfUpChannelScdmaHoppingSeed, docsIfUpChannelType, and docsIfUpChannelPreEqEnable Setting this object to the value of a non-existent or a temporary upstream interface returns the error 'wrongValue'. This object MUST contain a value of zero for physical interfaces entries. Setting this object in row entries that correspond to physical interfaces returns the error 'wrongValue'." ::= { docsIfUpstreamChannelEntry 16 }
Automatically extracted from Cisco "SNMP v2 MIBs".
docsIfUpChannelCloneFrom OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the ifIndex value of the physical interface row entry whose parameters are to be adjusted. Upon setting this object to the ifIndex value of a physical interface, the following interface objects values are copied to this entry: docsIfUpChannelFrequency, docsIfUpChannelWidth, docsIfUpChannelModulationProfile, docsIfUpChannelSlotSize, docsIfUpChannelRangingBackoffStart, docsIfUpChannelRangingBackoffEnd, docsIfUpChannelTxBackoffStart, docsIfUpChannelTxBackoffEnd, docsIfUpChannelScdmaActiveCodes, docsIfUpChannelScdmaCodesPerSlot, docsIfUpChannelScdmaFrameSize, docsIfUpChannelScdmaHoppingSeed, docsIfUpChannelType, and docsIfUpChannelPreEqEnable Setting this object to the value of a non-existent or a temporary upstream interface returns the error 'wrongValue'. This object MUST contain a value of zero for physical interfaces entries. Setting this object in row entries that correspond to physical interfaces returns the error 'wrongValue'." ::= { docsIfUpstreamChannelEntry 16 }
docsIfUpChannelCloneFrom OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the ifIndex value of the physical interface row entry whose parameters are to be adjusted. Upon setting this object to the ifIndex value of a physical interface, the following interface objects values are copied to this entry: docsIfUpChannelFrequency, docsIfUpChannelWidth, docsIfUpChannelModulationProfile, docsIfUpChannelSlotSize, docsIfUpChannelRangingBackoffStart, docsIfUpChannelRangingBackoffEnd, docsIfUpChannelTxBackoffStart, docsIfUpChannelTxBackoffEnd, docsIfUpChannelScdmaActiveCodes, docsIfUpChannelScdmaCodesPerSlot, docsIfUpChannelScdmaFrameSize, docsIfUpChannelScdmaHoppingSeed, docsIfUpChannelType, and docsIfUpChannelPreEqEnable Setting this object to the value of a non-existent or a temporary upstream interface returns the error 'wrongValue'. This object MUST contain a value of zero for physical interfaces entries. Setting this object in row entries that correspond to physical interfaces returns the error 'wrongValue'." ::= { docsIfUpstreamChannelEntry 16 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.127.1.1.2.1.1 | docsIfUpChannelId | 0 | 0 | The CMTS identification of the upstream channel. |
| 1.3.6.1.2.1.10.127.1.1.2.1.2 | docsIfUpChannelFrequency | 0 | 0 | The center of the frequency band associated with this upstream channel. This object returns 0 if the frequency is undefined or un… |
| 1.3.6.1.2.1.10.127.1.1.2.1.3 | docsIfUpChannelWidth | 0 | 0 | The bandwidth of this upstream channel. This object returns 0 if the channel width is undefined or unknown. Minimum permitted cha… |
| 1.3.6.1.2.1.10.127.1.1.2.1.4 | docsIfUpChannelModulationProfile | 0 | 0 | An entry identical to the docsIfModIndex in the docsIfCmtsModulationTable that describes this channel. This channel is further in… |
| 1.3.6.1.2.1.10.127.1.1.2.1.5 | docsIfUpChannelSlotSize | 0 | 0 | The number of 6.25 microsecond ticks in each upstream mini- slot. Returns zero if the value is undefined or unknown. See the asso… |
| 1.3.6.1.2.1.10.127.1.1.2.1.6 | docsIfUpChannelTxTimingOffset | 0 | 0 | A measure of the current round trip time at the CM, or the maximum round trip time seen by the CMTS. Used for timing of CM upstr… |
| 1.3.6.1.2.1.10.127.1.1.2.1.7 | docsIfUpChannelRangingBackoffStart | 0 | 0 | The initial random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS ind… |
| 1.3.6.1.2.1.10.127.1.1.2.1.8 | docsIfUpChannelRangingBackoffEnd | 0 | 0 | The final random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indic… |
| 1.3.6.1.2.1.10.127.1.1.2.1.9 | docsIfUpChannelTxBackoffStart | 0 | 0 | The initial random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indica… |
| 1.3.6.1.2.1.10.127.1.1.2.1.10 | docsIfUpChannelTxBackoffEnd | 0 | 0 | The final random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicate… |
| 1.3.6.1.2.1.10.127.1.1.2.1.11 | docsIfUpChannelScdmaActiveCodes | 0 | 0 | Applicable for SCDMA channel types only. Number of active codes. Returns zero for Non-SCDMA channel types. Note that legal value… |
| 1.3.6.1.2.1.10.127.1.1.2.1.12 | docsIfUpChannelScdmaCodesPerSlot | 0 | 0 | Applicable for SCDMA channel types only. The number of SCDMA codes per mini-slot. Returns zero if the value is undefined or unkno… |
| 1.3.6.1.2.1.10.127.1.1.2.1.13 | docsIfUpChannelScdmaFrameSize | 0 | 0 | Applicable for SCDMA channel types only. SCDMA Frame size in units of spreading intervals. This value returns zero for non-SCDMA … |
| 1.3.6.1.2.1.10.127.1.1.2.1.14 | docsIfUpChannelScdmaHoppingSeed | 0 | 0 | Applicable for SCDMA channel types only. 15-bit seed used for code hopping sequence initialization. Returns zero for non-SCDMA ch… |
| 1.3.6.1.2.1.10.127.1.1.2.1.15 | docsIfUpChannelType | 0 | 0 | Reflects the Upstream channel type. This object returns the value of docsIfCmtsModChannelType for the modulation profile selected… |
| 1.3.6.1.2.1.10.127.1.1.2.1.17 | docsIfUpChannelUpdate | 0 | 0 | Used to perform the copy of adjusted parameters from the temporary interface entry to the physical interface indicated by the doc… |
| 1.3.6.1.2.1.10.127.1.1.2.1.18 | docsIfUpChannelStatus | 0 | 0 | docsIfUpChannelStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is generally … |
| 1.3.6.1.2.1.10.127.1.1.2.1.19 | docsIfUpChannelPreEqEnable | 0 | 0 | At the CMTS, this object is used to enable or disable pre-equalization on the upstream channel represented by this table instance… |