An entry identical to the docsIfModIndex in the
docsIfCmtsModulationTable that describes this channel.
This channel is further instantiated there by a grouping
of interval usage codes (IUCs) that, together, fully
describe the channel modulation. This object returns 0 if
the docsIfCmtsModulationTable entry does not exist or is
empty. See the associated conformance object for write
conditions and limitations.
Setting this object returns an 'inconsistentValue'
error if the following conditions are not satisfied:
1. All the IUC entries in the selected modulation profile
MUST have the same value of docsIfCmtsModChannelType.
2. All of the Modulation parameters in the selected
modulation profile MUST be consistent with the other
parameters in this docsIfUpstreamChannelEntry.
Parsed from file DOCS-IF-MIB.mib
Module: DOCS-IF-MIB
An entry identical to the docsIfModIndex in the
docsIfCmtsModulationTable that describes this channel.
This channel is further instantiated there by a grouping
of interval usage codes (IUCs) that, together, fully
describe the channel modulation. This object returns 0 if
the docsIfCmtsModulationTable entry does not exist or is
empty. See the associated conformance object for write
conditions and limitations.
Setting this object returns an 'inconsistentValue'
error if the following conditions are not satisfied:
1. All the IUC entries in the selected modulation profile
MUST have the same value of docsIfCmtsModChannelType.
2. All of the Modulation parameters in the selected
modulation profile MUST be consistent with the other
parameters in this docsIfUpstreamChannelEntry.
docsIfUpChannelModulationProfile OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An entry identical to the docsIfModIndex in the
docsIfCmtsModulationTable that describes this channel.
This channel is further instantiated there by a grouping
of interval usage codes which together fully describe the
channel modulation. This object returns 0 if the
docsIfCmtsModulationTable entry does not exist or
docsIfCmtsModulationTable is empty. See
the associated conformance object for write conditions
and limitations."
View at oid-info.com
An entry identical to the docsIfModIndex in the
docsIfCmtsModulationTable that describes this channel.
This channel is further instantiated there by a grouping
of interval usage codes which together fully describe the
channel modulation. This object returns 0 if the
docsIfCmtsModulationTable entry does not exist or
docsIfCmtsModulationTable is empty. See
the associated conformance object for write conditions
and limitations.
Parsed from file DOCS-IF-MIB.txt
Company: None
Module: DOCS-IF-MIB
An entry identical to the docsIfModIndex in the
docsIfCmtsModulationTable that describes this channel.
This channel is further instantiated there by a grouping
of interval usage codes (IUCs) that, together, fully
describe the channel modulation. This object returns 0 if
the docsIfCmtsModulationTable entry does not exist or is
empty. See the associated conformance object for write
conditions and limitations.
Setting this object returns an 'inconsistentValue'
error if the following conditions are not satisfied:
1. All the IUC entries in the selected modulation profile
MUST have the same value of docsIfCmtsModChannelType.
2. All of the Modulation parameters in the selected
modulation profile MUST be consistent with the other
parameters in this docsIfUpstreamChannelEntry.
docsIfUpChannelModulationProfile OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "An entry identical to the docsIfModIndex in the docsIfCmtsModulationTable that describes this channel. This channel is further instantiated there by a grouping of interval usage codes (IUCs) that, together, fully describe the channel modulation. This object returns 0 if the docsIfCmtsModulationTable entry does not exist or is empty. See the associated conformance object for write conditions and limitations. Setting this object returns an 'inconsistentValue' error if the following conditions are not satisfied: 1. All the IUC entries in the selected modulation profile MUST have the same value of docsIfCmtsModChannelType. 2. All of the Modulation parameters in the selected modulation profile MUST be consistent with the other parameters in this docsIfUpstreamChannelEntry." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification SP-RFIv2.0-I10-051209, Table 8-19." ::= { docsIfUpstreamChannelEntry 4 }
docsIfUpChannelModulationProfile OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "An entry identical to the docsIfModIndex in the docsIfCmtsModulationTable that describes this channel. This channel is further instantiated there by a grouping of interval usage codes (IUCs) that, together, fully describe the channel modulation. This object returns 0 if the docsIfCmtsModulationTable entry does not exist or is empty. See the associated conformance object for write conditions and limitations. Setting this object returns an 'inconsistentValue' error if the following conditions are not satisfied: 1. All the IUC entries in the selected modulation profile MUST have the same value of docsIfCmtsModChannelType. 2. All of the Modulation parameters in the selected modulation profile MUST be consistent with the other parameters in this docsIfUpstreamChannelEntry." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification SP-RFIv2.0-I10-051209, Table 8-19." ::= { docsIfUpstreamChannelEntry 4 }
Automatically extracted from RFC2670
docsIfUpChannelModulationProfile OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "An entry identical to the docsIfModIndex in the docsIfCmtsModulationTable that describes this channel. This channel is further instantiated there by a grouping of interval usage codes which together fully describe the channel modulation. This object returns 0 if the docsIfCmtsModulationTable entry does not exist or docsIfCmtsModulationTable is empty. See the associated conformance object for write conditions and limitations." ::= { docsIfUpstreamChannelEntry 4 }
docsIfUpChannelModulationProfile OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "An entry identical to the docsIfModIndex in the docsIfCmtsModulationTable that describes this channel. This channel is further instantiated there by a grouping of interval usage codes (IUCs) that, together, fully describe the channel modulation. This object returns 0 if the docsIfCmtsModulationTable entry does not exist or is empty. See the associated conformance object for write conditions and limitations. Setting this object returns an 'inconsistentValue' error if the following conditions are not satisfied: 1. All the IUC entries in the selected modulation profile MUST have the same value of docsIfCmtsModChannelType. 2. All of the Modulation parameters in the selected modulation profile MUST be consistent with the other parameters in this docsIfUpstreamChannelEntry." REFERENCE "Data-Over-Cable Service Interface Specifications: Radio Frequency Interface Specification SP-RFIv2.0-I10-051209, Table 8-19." ::= { docsIfUpstreamChannelEntry 4 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.127.1.1.2.1.1 | docsIfUpChannelId | 0 | 0 | The CMTS identification of the upstream channel. |
| 1.3.6.1.2.1.10.127.1.1.2.1.2 | docsIfUpChannelFrequency | 0 | 0 | The center of the frequency band associated with this upstream channel. This object returns 0 if the frequency is undefined or un… |
| 1.3.6.1.2.1.10.127.1.1.2.1.3 | docsIfUpChannelWidth | 0 | 0 | The bandwidth of this upstream channel. This object returns 0 if the channel width is undefined or unknown. Minimum permitted cha… |
| 1.3.6.1.2.1.10.127.1.1.2.1.5 | docsIfUpChannelSlotSize | 0 | 0 | The number of 6.25 microsecond ticks in each upstream mini- slot. Returns zero if the value is undefined or unknown. See the asso… |
| 1.3.6.1.2.1.10.127.1.1.2.1.6 | docsIfUpChannelTxTimingOffset | 0 | 0 | A measure of the current round trip time at the CM, or the maximum round trip time seen by the CMTS. Used for timing of CM upstr… |
| 1.3.6.1.2.1.10.127.1.1.2.1.7 | docsIfUpChannelRangingBackoffStart | 0 | 0 | The initial random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS ind… |
| 1.3.6.1.2.1.10.127.1.1.2.1.8 | docsIfUpChannelRangingBackoffEnd | 0 | 0 | The final random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indic… |
| 1.3.6.1.2.1.10.127.1.1.2.1.9 | docsIfUpChannelTxBackoffStart | 0 | 0 | The initial random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indica… |
| 1.3.6.1.2.1.10.127.1.1.2.1.10 | docsIfUpChannelTxBackoffEnd | 0 | 0 | The final random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicate… |
| 1.3.6.1.2.1.10.127.1.1.2.1.11 | docsIfUpChannelScdmaActiveCodes | 0 | 0 | Applicable for SCDMA channel types only. Number of active codes. Returns zero for Non-SCDMA channel types. Note that legal value… |
| 1.3.6.1.2.1.10.127.1.1.2.1.12 | docsIfUpChannelScdmaCodesPerSlot | 0 | 0 | Applicable for SCDMA channel types only. The number of SCDMA codes per mini-slot. Returns zero if the value is undefined or unkno… |
| 1.3.6.1.2.1.10.127.1.1.2.1.13 | docsIfUpChannelScdmaFrameSize | 0 | 0 | Applicable for SCDMA channel types only. SCDMA Frame size in units of spreading intervals. This value returns zero for non-SCDMA … |
| 1.3.6.1.2.1.10.127.1.1.2.1.14 | docsIfUpChannelScdmaHoppingSeed | 0 | 0 | Applicable for SCDMA channel types only. 15-bit seed used for code hopping sequence initialization. Returns zero for non-SCDMA ch… |
| 1.3.6.1.2.1.10.127.1.1.2.1.15 | docsIfUpChannelType | 0 | 0 | Reflects the Upstream channel type. This object returns the value of docsIfCmtsModChannelType for the modulation profile selected… |
| 1.3.6.1.2.1.10.127.1.1.2.1.16 | docsIfUpChannelCloneFrom | 0 | 0 | docsIfUpChannelCloneFrom OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Intended fo… |
| 1.3.6.1.2.1.10.127.1.1.2.1.17 | docsIfUpChannelUpdate | 0 | 0 | Used to perform the copy of adjusted parameters from the temporary interface entry to the physical interface indicated by the doc… |
| 1.3.6.1.2.1.10.127.1.1.2.1.18 | docsIfUpChannelStatus | 0 | 0 | docsIfUpChannelStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is generally … |
| 1.3.6.1.2.1.10.127.1.1.2.1.19 | docsIfUpChannelPreEqEnable | 0 | 0 | At the CMTS, this object is used to enable or disable pre-equalization on the upstream channel represented by this table instance… |