Reference record for OID 1.3.6.1.2.1.10.127.1.2.2.1.16



parent
1.3.6.1.2.1.10.127.1.2.2.1 (docsIfCmStatusEntry)
node code
16
node name
docsIfCmStatusModulationType
dot oid
1.3.6.1.2.1.10.127.1.2.2.1.16
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfCmObjects(2) docsIfCmStatusTable(2) docsIfCmStatusEntry(1) docsIfCmStatusModulationType(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfCmObjects(2) docsIfCmStatusTable(2) docsIfCmStatusEntry(1) docsIfCmStatusModulationType(16)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfCmObjects(2) docsIfCmStatusTable(2) docsIfCmStatusEntry(1) docsIfCmStatusModulationType(16)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfCmObjects(2) docsIfCmStatusTable(2) docsIfCmStatusEntry(1) docsIfCmStatusModulationType(16)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfCmObjects(2) docsIfCmStatusTable(2) docsIfCmStatusEntry(1) docsIfCmStatusModulationType(16)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfCmObjects(2) docsIfCmStatusTable(2) docsIfCmStatusEntry(1) docsIfCmStatusModulationType(16)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/docsIfMib/docsIfMibObjects/docsIfCmObjects/docsIfCmStatusTable/docsIfCmStatusEntry/docsIfCmStatusModulationType
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/docsIfMib/docsIfMibObjects/docsIfCmObjects/docsIfCmStatusTable/docsIfCmStatusEntry/docsIfCmStatusModulationType
  • /iso/org/dod/internet/mgmt/mib-2/transmission/docsIfMib/docsIfMibObjects/docsIfCmObjects/docsIfCmStatusTable/docsIfCmStatusEntry/docsIfCmStatusModulationType
  • /iso/org/dod/internet/mgmt/mib/transmission/docsIfMib/docsIfMibObjects/docsIfCmObjects/docsIfCmStatusTable/docsIfCmStatusEntry/docsIfCmStatusModulationType
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/docsIfMib/docsIfMibObjects/docsIfCmObjects/docsIfCmStatusTable/docsIfCmStatusEntry/docsIfCmStatusModulationType
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/docsIfMib/docsIfMibObjects/docsIfCmObjects/docsIfCmStatusTable/docsIfCmStatusEntry/docsIfCmStatusModulationType
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/127/1/2/2/1/16

    Description by circitor

    Indicates modulation type status currently used by the
    CM. Since this object specifically identifies PHY mode,
    the shared upstream channel type is not permitted.

    Parsed from file DOCS-IF-MIB.mib
    Module: DOCS-IF-MIB

    Description by cisco_v1

    Indicates modulation type status currently used by the
    CM. Since this object specifically identifies PHY mode,
    the shared upstream channel type is not permitted.

    Description by oid_info

    docsIfCmStatusModulationType OBJECT-TYPE
    SYNTAX DocsisUpstreamTypeStatus
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Indicates modulation type status currently used by the CM.
    Since this object specifically identifies PHY mode, the shared
    upstream channel type is not permitted."
    REFERENCE
    "Document [25] from References, Section 6.2.1."
    View at oid-info.com

    Description by mibdepot

    Indicates modulation type status currently used by the
    CM. Since this object specifically identifies PHY mode,
    the shared upstream channel type is not permitted.

    Parsed from file DOCS-IF-MIB.txt
    Company: None
    Module: DOCS-IF-MIB

    Description by cisco

    Indicates modulation type status currently used by the
    CM. Since this object specifically identifies PHY mode,
    the shared upstream channel type is not permitted.

    Information by circitor

    docsIfCmStatusModulationType OBJECT-TYPE
    SYNTAX DocsisUpstreamType








    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates modulation type status currently used by the
         CM.  Since this object specifically identifies PHY mode,
         the shared upstream channel type is not permitted."
    REFERENCE
        "Data-Over-Cable Service Interface Specifications: Radio
         Frequency Interface Specification SP-RFIv2.0-I10-051209,
         Section 6.2.1."
    ::= { docsIfCmStatusEntry 16 }

    Information by cisco_v1

    docsIfCmStatusModulationType OBJECT-TYPE
    SYNTAX DocsisUpstreamType








    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates modulation type status currently used by the
         CM.  Since this object specifically identifies PHY mode,
         the shared upstream channel type is not permitted."
    REFERENCE
        "Data-Over-Cable Service Interface Specifications: Radio
         Frequency Interface Specification SP-RFIv2.0-I10-051209,
         Section 6.2.1."
    ::= { docsIfCmStatusEntry 16 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    docsIfCmStatusModulationType OBJECT-TYPE
         SYNTAX      DocsisUpstreamType
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
             "Indicates modulation type status currently used by the
              CM.  Since this object specifically identifies PHY mode,
              the shared upstream channel type is not permitted."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I10-051209,
             Section 6.2.1."

         ::= { docsIfCmStatusEntry 16 }

    Information by cisco

    docsIfCmStatusModulationType OBJECT-TYPE
         SYNTAX      DocsisUpstreamType
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
             "Indicates modulation type status currently used by the
              CM.  Since this object specifically identifies PHY mode,
              the shared upstream channel type is not permitted."
        REFERENCE
            "Data-Over-Cable Service Interface Specifications: Radio
             Frequency Interface Specification SP-RFIv2.0-I10-051209,
             Section 6.2.1."

         ::= { docsIfCmStatusEntry 16 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (18)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.127.1.2.2.1.1 docsIfCmStatusValue 0 0 Current Cable Modem connectivity state, as specified
    in the RF Interface Specification.
    1.3.6.1.2.1.10.127.1.2.2.1.2 docsIfCmStatusCode 0 0 Status code for this Cable Modem as defined in the
    RF Interface Specification. The status code consists
    of a single character ind…
    1.3.6.1.2.1.10.127.1.2.2.1.3 docsIfCmStatusTxPower 0 0 The operational transmit power for the attached upstream
    channel.
    1.3.6.1.2.1.10.127.1.2.2.1.4 docsIfCmStatusResets 0 0 Number of times the CM reset or initialized
    this interface.
    1.3.6.1.2.1.10.127.1.2.2.1.5 docsIfCmStatusLostSyncs 0 0 Number of times the CM lost synchronization with
    the downstream channel.
    1.3.6.1.2.1.10.127.1.2.2.1.6 docsIfCmStatusInvalidMaps 0 0 Number of times the CM received invalid MAP messages.
    1.3.6.1.2.1.10.127.1.2.2.1.7 docsIfCmStatusInvalidUcds 0 0 Number of times the CM received invalid UCD messages.
    1.3.6.1.2.1.10.127.1.2.2.1.8 docsIfCmStatusInvalidRangingResponses, docsIfCmStatusInvalidRangingResp 0 0 Number of times the CM received invalid ranging response
    messages.
    1.3.6.1.2.1.10.127.1.2.2.1.9 docsIfCmStatusInvalidRegistrationResponses, docsIfCmStatusInvalidRegistrationResp 0 0 Number of times the CM received invalid registration
    response messages.
    1.3.6.1.2.1.10.127.1.2.2.1.10 docsIfCmStatusT1Timeouts 0 0 Number of times counter T1 expired in the CM.
    1.3.6.1.2.1.10.127.1.2.2.1.11 docsIfCmStatusT2Timeouts 0 0 Number of times counter T2 expired in the CM.
    1.3.6.1.2.1.10.127.1.2.2.1.12 docsIfCmStatusT3Timeouts 0 0 Number of times counter T3 expired in the CM.
    1.3.6.1.2.1.10.127.1.2.2.1.13 docsIfCmStatusT4Timeouts 0 0 Number of times counter T4 expired in the CM.
    1.3.6.1.2.1.10.127.1.2.2.1.14 docsIfCmStatusRangingAborteds 0 0 Number of times the ranging process was aborted
    by the CMTS.
    1.3.6.1.2.1.10.127.1.2.2.1.15 docsIfCmStatusDocsisOperMode 0 0 Indication of whether the device has registered using 1.0
    Class of Service or 1.1 Quality of Service.
    An unregistered CM SHOULD i…
    1.3.6.1.2.1.10.127.1.2.2.1.17 docsIfCmStatusEqualizationData 0 0 Pre-equalization data for this CM after convolution with
    data indicated in the RNG-RSP. This data is valid when
    docsIfUpChannelP…
    1.3.6.1.2.1.10.127.1.2.2.1.18 docsIfCmStatusUCCs 0 0 The number of successful Upstream Channel Change
    transactions.
    Discontinuities in the value of this counter can occur
    at reinitial…
    1.3.6.1.2.1.10.127.1.2.2.1.19 docsIfCmStatusUCCFails 0 0 The number of failed Upstream Channel Change
    transactions.
    Discontinuities in the value of this counter can occur
    at reinitializat…