This table describes the packet classification
configured on the CM or CMTS.
The model is that a packet either received
as input from an interface or transmitted
for output on an interface may be compared
against an ordered list of rules pertaining to
the packet contents. Each rule is a row of this
table. A matching rule provides a service flow
id to to which the packet is classified.
All rules need to match for a packet to match
a classifier.
The objects in this row correspond to a set of
Classifier Encoding parameters in a DOCSIS
MAC management message. The docsQosPktClassBitMap
indicates which particular parameters were present
in the classifier as signalled in the DOCSIS message.
If the referenced parameter was not present
in the signalled DOCSIS 1.1 Classifier, the
corresponding object in this row reports a
value as specified in the DESCRIPTION section.
Parsed from file DOCS-QOS-MIB.mib
Module: DOCS-QOS-MIB
This table describes the packet classification
configured on the CM or CMTS.
The model is that a packet either received
as input from an interface or transmitted
for output on an interface may be compared
against an ordered list of rules pertaining to
the packet contents. Each rule is a row of this
table. A matching rule provides a service flow
id to to which the packet is classified.
All rules need to match for a packet to match
a classifier.
The objects in this row correspond to a set of
Classifier Encoding parameters in a DOCSIS
MAC management message. The docsQosPktClassBitMap
indicates which particular parameters were present
in the classifier as signalled in the DOCSIS message.
If the referenced parameter was not present
in the signalled DOCSIS 1.1 Classifier, the
corresponding object in this row reports a
value as specified in the DESCRIPTION section.
docsQosPktClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosPktClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the packet classification
configured on the CM or CMTS.
The model is that a packet either received
as input from an interface or transmitted
for output on an interface may be compared
against an ordered list of rules pertaining to
the packet contents. Each rule is a row of this
table. A matching rule provides a service flow
id to to which the packet is classified.
All rules need to match for a packet to match
a classifier.
The objects in this row correspond to a set of
Classifier Encoding parameters in a DOCSIS
MAC management message. The docsQosPktClassBitMap
indicates which particular parameters were present
in the classifier as signalled in the DOCSIS message.
If the referenced parameter was not present
in the signalled DOCSIS 1.1 Classifier, the
corresponding object in this row reports a
value as specified in the DESCRIPTION section.
"
View at oid-info.com
This table describes the packet classification
configured on the CM or CMTS.
The model is that a packet either received
as input from an interface or transmitted
for output on an interface may be compared
against an ordered list of rules pertaining to
the packet contents. Each rule is a row of this
table. A matching rule provides a service flow
id to to which the packet is classified.
All rules need to match for a packet to match
a classifier.
The objects in this row correspond to a set of
Classifier Encoding parameters in a DOCSIS
MAC management message. The docsQosPktClassBitMap
indicates which particular parameters were present
in the classifier as signalled in the DOCSIS message.
If the referenced parameter was not present
in the signalled DOCSIS 1.1 Classifier, the
corresponding object in this row reports a
value as specified in the DESCRIPTION section.
Parsed from file DOCS-QOS-MIB-ipcdn-05.txt
Company: None
Module: DOCS-QOS-MIB
This table describes the packet classification
configured on the CM or CMTS.
The model is that a packet either received
as input from an interface or transmitted
for output on an interface may be compared
against an ordered list of rules pertaining to
the packet contents. Each rule is a row of this
table. A matching rule provides a service flow
id to to which the packet is classified.
All rules need to match for a packet to match
a classifier.
The objects in this row correspond to a set of
Classifier Encoding parameters in a DOCSIS
MAC management message. The docsQosPktClassBitMap
indicates which particular parameters were present
in the classifier as signalled in the DOCSIS message.
If the referenced parameter was not present
in the signalled DOCSIS 1.1 Classifier, the
corresponding object in this row reports a
value as specified in the DESCRIPTION section.
docsQosPktClassTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQosPktClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the packet classification configured on the CM or CMTS. The model is that a packet either received as input from an interface or transmitted for output on an interface may be compared against an ordered list of rules pertaining to the packet contents. Each rule is a row of this table. A matching rule provides a service flow id to to which the packet is classified. All rules need to match for a packet to match a classifier. The objects in this row correspond to a set of Classifier Encoding parameters in a DOCSIS MAC management message. The docsQosPktClassBitMap indicates which particular parameters were present in the classifier as signalled in the DOCSIS message. If the referenced parameter was not present in the signalled DOCSIS 1.1 Classifier, the corresponding object in this row reports a value as specified in the DESCRIPTION section. " ::= { docsQosMIBObjects 1 }
docsQosPktClassTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQosPktClassEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the packet classification configured on the CM or CMTS. The model is that a packet either received as input from an interface or transmitted for output on an interface may be compared against an ordered list of rules pertaining to the packet contents. Each rule is a row of this table. A matching rule provides a service flow id to to which the packet is classified. All rules need to match for a packet to match a classifier. The objects in this row correspond to a set of Classifier Encoding parameters in a DOCSIS MAC management message. The docsQosPktClassBitMap indicates which particular parameters were present in the classifier as signalled in the DOCSIS message. If the referenced parameter was not present in the signalled DOCSIS 1.1 Classifier, the corresponding object in this row reports a value as specified in the DESCRIPTION section. " ::= { docsQosMIBObjects 1 }
Automatically extracted from Cisco "SNMP v2 MIBs".
docsQosPktClassTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQosPktClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the packet classification configured on the CM or CMTS. The model is that a packet either received as input from an interface or transmitted for output on an interface may be compared against an ordered list of rules pertaining to the packet contents. Each rule is a row of this table. A matching rule provides a service flow id to to which the packet is classified. All rules need to match for a packet to match a classifier. The objects in this row correspond to a set of Classifier Encoding parameters in a DOCSIS MAC management message. The docsQosPktClassBitMap indicates which particular parameters were present in the classifier as signalled in the DOCSIS message. If the referenced parameter was not present in the signalled DOCSIS 1.1 Classifier, the corresponding object in this row reports a value as specified in the DESCRIPTION section. " ::= { docsQosMIBObjects 1 }
docsQosPktClassTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQosPktClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the packet classification configured on the CM or CMTS. The model is that a packet either received as input from an interface or transmitted for output on an interface may be compared against an ordered list of rules pertaining to the packet contents. Each rule is a row of this table. A matching rule provides a service flow id to to which the packet is classified. All rules need to match for a packet to match a classifier. The objects in this row correspond to a set of Classifier Encoding parameters in a DOCSIS MAC management message. The docsQosPktClassBitMap indicates which particular parameters were present in the classifier as signalled in the DOCSIS message. If the referenced parameter was not present in the signalled DOCSIS 1.1 Classifier, the corresponding object in this row reports a value as specified in the DESCRIPTION section. " ::= { docsQosMIBObjects 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.127.7.1.1.1 | docsQosPktClassEntry | 35 | 35 | An entry in this table provides a single packet classifier rule. The index ifIndex is an ifType of docsCableMaclayer(127). |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.127.7.1.2 | docsQosParamSetTable | 2 | 46 | This table describes the set of DOCSIS 1.1 QOS parameters defined in a managed device. The ifIndex index specifies a DOCSIS MAC D… |
| 1.3.6.1.2.1.10.127.7.1.3 | docsQosServiceFlowTable | 1 | 14 | This table describes the set of Docsis-QOS Service Flows in a managed device. |
| 1.3.6.1.2.1.10.127.7.1.4 | docsQosServiceFlowStatsTable | 1 | 8 | This table describes statistics associated with the Service Flows in a managed device. |
| 1.3.6.1.2.1.10.127.7.1.5 | docsQosUpstreamStatsTable | 1 | 5 | This table describes statistics associated with upstream service flows. All counted frames must be received without an FCS error. |
| 1.3.6.1.2.1.10.127.7.1.6 | docsQosDynamicServiceStatsTable | 1 | 23 | This table describes statistics associated with the Dynamic Service Flows in a managed device. |
| 1.3.6.1.2.1.10.127.7.1.7 | docsQosServiceFlowLogTable | 1 | 16 | This table contains a log of the disconnected Service Flows in a managed device. |
| 1.3.6.1.2.1.10.127.7.1.8 | docsQosServiceClassTable | 1 | 24 | This table describes the set of Docsis-QOS Service Classes in a CMTS. |
| 1.3.6.1.2.1.10.127.7.1.9 | docsQosServiceClassPolicyTable | 1 | 5 | This table describes the set of Docsis-QOS Service Class Policies. This table is an adjunct to the docsDevFilterPolicy table. Ent… |
| 1.3.6.1.2.1.10.127.7.1.10 | docsQosPHSTable | 1 | 7 | This table describes set of payload header suppression entries. |
| 1.3.6.1.2.1.10.127.7.1.11 | docsQosCmtsMacToSrvFlowTable | 1 | 4 | This table provide for referencing the service flows associated with a particular cable modem. This allows for indexing into othe… |