This table describes the set of DOCSIS 1.1 QOS
parameters defined in a managed device.
The ifIndex index specifies a DOCSIS MAC Domain.
The docsQosServiceFlowId index specifies a particular
Service Flow.
The docsQosParamSetType index indicates whether
the active, admitted, or provisioned QOS Parameter
Set is being described by the row.
Only the QOS Parameter Sets of Docsis 1.1 service
flows are represented in this table. Docsis 1.0
QOS service profiles are not represented in this
table.
Each row corresponds to a DOCSIS QOS Parameter Set
as signaled via DOCSIS MAC management messages.
Each object in the row corresponds to one or
part of one DOCSIS 1.1 Service Flow Encoding.
The docsQosParamSetBitMap object in the row indicates
which particular parameters were signalled in
the original registration or dynamic service
request message that created the QOS Parameter Set.
In many cases, even if a QOS Parameter Set parameter
was not signalled, the DOCSIS specification calls
for a default value to be used. That default value
is reported as the value of the corresponding object
in this row.
Many objects are not applicable depending on
the service flow direction or upstream scheduling
type. The object value reported in this case
is specified in the DESCRIPTION clause.
Parsed from file DOCS-QOS-MIB.mib
Module: DOCS-QOS-MIB
This table describes the set of DOCSIS 1.1 QOS
parameters defined in a managed device.
The ifIndex index specifies a DOCSIS MAC Domain.
The docsQosServiceFlowId index specifies a particular
Service Flow.
The docsQosParamSetType index indicates whether
the active, admitted, or provisioned QOS Parameter
Set is being described by the row.
Only the QOS Parameter Sets of Docsis 1.1 service
flows are represented in this table. Docsis 1.0
QOS service profiles are not represented in this
table.
Each row corresponds to a DOCSIS QOS Parameter Set
as signaled via DOCSIS MAC management messages.
Each object in the row corresponds to one or
part of one DOCSIS 1.1 Service Flow Encoding.
The docsQosParamSetBitMap object in the row indicates
which particular parameters were signalled in
the original registration or dynamic service
request message that created the QOS Parameter Set.
In many cases, even if a QOS Parameter Set parameter
was not signalled, the DOCSIS specification calls
for a default value to be used. That default value
is reported as the value of the corresponding object
in this row.
Many objects are not applicable depending on
the service flow direction or upstream scheduling
type. The object value reported in this case
is specified in the DESCRIPTION clause.
docsQosParamSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosParamSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the set of DOCSIS 1.1 QOS
parameters defined in a managed device.
The ifIndex index specifies a DOCSIS MAC Domain.
The docsQosServiceFlowId index specifies a particular
Service Flow.
The docsQosParamSetType index indicates whether
the active, admitted, or provisioned QOS Parameter
Set is being described by the row.
Only the QOS Parameter Sets of Docsis 1.1 service
flows are represented in this table. Docsis 1.0
QOS service profiles are not represented in this
table.
Each row corresponds to a DOCSIS QOS Parameter Set
as signaled via DOCSIS MAC management messages.
Each object in the row corresponds to one or
part of one DOCSIS 1.1 Service Flow Encoding.
The docsQosParamSetBitMap object in the row indicates
which particular parameters were signalled in
the original registration or dynamic service
request message that created the QOS Parameter Set.
In many cases, even if a QOS Parameter Set parameter
was not signalled, the DOCSIS specification calls
for a default value to be used. That default value
is reported as the value of the corresponding object
in this row.
Many objects are not applicable depending on
the service flow direction or upstream scheduling
type. The object value reported in this case
is specified in the DESCRIPTION clause.
"
View at oid-info.com
This table describes the set of DOCSIS 1.1 QOS
parameters defined in a managed device.
The ifIndex index specifies a DOCSIS MAC Domain.
The docsQosServiceFlowId index specifies a particular
Service Flow.
The docsQosParamSetType index indicates whether
the active, admitted, or provisioned QOS Parameter
Set is being described by the row.
Only the QOS Parameter Sets of Docsis 1.1 service
flows are represented in this table. Docsis 1.0
QOS service profiles are not represented in this
table.
Each row corresponds to a DOCSIS QOS Parameter Set
as signaled via DOCSIS MAC management messages.
Each object in the row corresponds to one or
part of one DOCSIS 1.1 Service Flow Encoding.
The docsQosParamSetBitMap object in the row indicates
which particular parameters were signalled in
the original registration or dynamic service
request message that created the QOS Parameter Set.
In many cases, even if a QOS Parameter Set parameter
was not signalled, the DOCSIS specification calls
for a default value to be used. That default value
is reported as the value of the corresponding object
in this row.
Many objects are not applicable depending on
the service flow direction or upstream scheduling
type. The object value reported in this case
is specified in the DESCRIPTION clause.
Parsed from file DOCS-QOS-MIB-ipcdn-05.txt
Company: None
Module: DOCS-QOS-MIB
This table describes the set of DOCSIS 1.1 QOS
parameters defined in a managed device.
The ifIndex index specifies a DOCSIS MAC Domain.
The docsQosServiceFlowId index specifies a particular
Service Flow.
The docsQosParamSetType index indicates whether
the active, admitted, or provisioned QOS Parameter
Set is being described by the row.
Only the QOS Parameter Sets of Docsis 1.1 service
flows are represented in this table. Docsis 1.0
QOS service profiles are not represented in this
table.
Each row corresponds to a DOCSIS QOS Parameter Set
as signaled via DOCSIS MAC management messages.
Each object in the row corresponds to one or
part of one DOCSIS 1.1 Service Flow Encoding.
The docsQosParamSetBitMap object in the row indicates
which particular parameters were signalled in
the original registration or dynamic service
request message that created the QOS Parameter Set.
In many cases, even if a QOS Parameter Set parameter
was not signalled, the DOCSIS specification calls
for a default value to be used. That default value
is reported as the value of the corresponding object
in this row.
Many objects are not applicable depending on
the service flow direction or upstream scheduling
type. The object value reported in this case
is specified in the DESCRIPTION clause.
docsQosParamSetTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQosParamSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the set of DOCSIS 1.1 QOS parameters defined in a managed device. The ifIndex index specifies a DOCSIS MAC Domain. The docsQosServiceFlowId index specifies a particular Service Flow. The docsQosParamSetType index indicates whether the active, admitted, or provisioned QOS Parameter Set is being described by the row. Only the QOS Parameter Sets of Docsis 1.1 service flows are represented in this table. Docsis 1.0 QOS service profiles are not represented in this table. Each row corresponds to a DOCSIS QOS Parameter Set as signaled via DOCSIS MAC management messages. Each object in the row corresponds to one or part of one DOCSIS 1.1 Service Flow Encoding. The docsQosParamSetBitMap object in the row indicates which particular parameters were signalled in the original registration or dynamic service request message that created the QOS Parameter Set. In many cases, even if a QOS Parameter Set parameter was not signalled, the DOCSIS specification calls for a default value to be used. That default value is reported as the value of the corresponding object in this row. Many objects are not applicable depending on the service flow direction or upstream scheduling type. The object value reported in this case is specified in the DESCRIPTION clause. " ::= { docsQosMIBObjects 2 }
docsQosParamSetTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQosParamSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes the set of DOCSIS 1.1 QOS parameters defined in a managed device. The ifIndex index specifies a DOCSIS MAC Domain. The docsQosServiceFlowId index specifies a particular Service Flow. The docsQosParamSetType index indicates whether the active, admitted, or provisioned QOS Parameter Set is being described by the row. Only the QOS Parameter Sets of Docsis 1.1 service flows are represented in this table. Docsis 1.0 QOS service profiles are not represented in this table. Each row corresponds to a DOCSIS QOS Parameter Set as signaled via DOCSIS MAC management messages. Each object in the row corresponds to one or part of one DOCSIS 1.1 Service Flow Encoding. The docsQosParamSetBitMap object in the row indicates which particular parameters were signalled in the original registration or dynamic service request message that created the QOS Parameter Set. In many cases, even if a QOS Parameter Set parameter was not signalled, the DOCSIS specification calls for a default value to be used. That default value is reported as the value of the corresponding object in this row. Many objects are not applicable depending on the service flow direction or upstream scheduling type. The object value reported in this case is specified in the DESCRIPTION clause. " ::= { docsQosMIBObjects 2 }
Automatically extracted from Cisco "SNMP v2 MIBs".
docsQosParamSetTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQosParamSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the set of DOCSIS 1.1 QOS parameters defined in a managed device. The ifIndex index specifies a DOCSIS MAC Domain. The docsQosServiceFlowId index specifies a particular Service Flow. The docsQosParamSetType index indicates whether the active, admitted, or provisioned QOS Parameter Set is being described by the row. Only the QOS Parameter Sets of Docsis 1.1 service flows are represented in this table. Docsis 1.0 QOS service profiles are not represented in this table. Each row corresponds to a DOCSIS QOS Parameter Set as signaled via DOCSIS MAC management messages. Each object in the row corresponds to one or part of one DOCSIS 1.1 Service Flow Encoding. The docsQosParamSetBitMap object in the row indicates which particular parameters were signalled in the original registration or dynamic service request message that created the QOS Parameter Set. In many cases, even if a QOS Parameter Set parameter was not signalled, the DOCSIS specification calls for a default value to be used. That default value is reported as the value of the corresponding object in this row. Many objects are not applicable depending on the service flow direction or upstream scheduling type. The object value reported in this case is specified in the DESCRIPTION clause. " ::= { docsQosMIBObjects 2 }
docsQosParamSetTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQosParamSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the set of DOCSIS 1.1 QOS parameters defined in a managed device. The ifIndex index specifies a DOCSIS MAC Domain. The docsQosServiceFlowId index specifies a particular Service Flow. The docsQosParamSetType index indicates whether the active, admitted, or provisioned QOS Parameter Set is being described by the row. Only the QOS Parameter Sets of Docsis 1.1 service flows are represented in this table. Docsis 1.0 QOS service profiles are not represented in this table. Each row corresponds to a DOCSIS QOS Parameter Set as signaled via DOCSIS MAC management messages. Each object in the row corresponds to one or part of one DOCSIS 1.1 Service Flow Encoding. The docsQosParamSetBitMap object in the row indicates which particular parameters were signalled in the original registration or dynamic service request message that created the QOS Parameter Set. In many cases, even if a QOS Parameter Set parameter was not signalled, the DOCSIS specification calls for a default value to be used. That default value is reported as the value of the corresponding object in this row. Many objects are not applicable depending on the service flow direction or upstream scheduling type. The object value reported in this case is specified in the DESCRIPTION clause. " ::= { docsQosMIBObjects 2 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.127.7.1.2.1 | docsQosParamSetEntry | 22 | 22 | A unique set of QOS parameters. |
| 1.3.6.1.2.1.10.127.7.1.2.2 | docsQosParamSetEntry | 22 | 22 | A unique set of QOS parameters. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.127.7.1.1 | docsQosPktClassTable | 1 | 36 | This table describes the packet classification configured on the CM or CMTS. The model is that a packet either received as input f… |
| 1.3.6.1.2.1.10.127.7.1.3 | docsQosServiceFlowTable | 1 | 14 | This table describes the set of Docsis-QOS Service Flows in a managed device. |
| 1.3.6.1.2.1.10.127.7.1.4 | docsQosServiceFlowStatsTable | 1 | 8 | This table describes statistics associated with the Service Flows in a managed device. |
| 1.3.6.1.2.1.10.127.7.1.5 | docsQosUpstreamStatsTable | 1 | 5 | This table describes statistics associated with upstream service flows. All counted frames must be received without an FCS error. |
| 1.3.6.1.2.1.10.127.7.1.6 | docsQosDynamicServiceStatsTable | 1 | 23 | This table describes statistics associated with the Dynamic Service Flows in a managed device. |
| 1.3.6.1.2.1.10.127.7.1.7 | docsQosServiceFlowLogTable | 1 | 16 | This table contains a log of the disconnected Service Flows in a managed device. |
| 1.3.6.1.2.1.10.127.7.1.8 | docsQosServiceClassTable | 1 | 24 | This table describes the set of Docsis-QOS Service Classes in a CMTS. |
| 1.3.6.1.2.1.10.127.7.1.9 | docsQosServiceClassPolicyTable | 1 | 5 | This table describes the set of Docsis-QOS Service Class Policies. This table is an adjunct to the docsDevFilterPolicy table. Ent… |
| 1.3.6.1.2.1.10.127.7.1.10 | docsQosPHSTable | 1 | 7 | This table describes set of payload header suppression entries. |
| 1.3.6.1.2.1.10.127.7.1.11 | docsQosCmtsMacToSrvFlowTable | 1 | 4 | This table provide for referencing the service flows associated with a particular cable modem. This allows for indexing into othe… |