This object applies only to Ethernet frames
using the 802.1P/Q tag header.
If this object's value is nonzero, tagged
packets must have a VLAN Identifier that matches
the value in order to match the rule.
Only the least significant 12 bits of this object's
value are valid.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 0.
Parsed from file DOCS-QOS-MIB.mib
Module: DOCS-QOS-MIB
This object applies only to Ethernet frames
using the 802.1P/Q tag header.
If this object's value is nonzero, tagged
packets must have a VLAN Identifier that matches
the value in order to match the rule.
Only the least significant 12 bits of this object's
value are valid.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 0.
docsQosPktClassVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object applies only to Ethernet frames
using the 802.1P/Q tag header.
If this objects value is nonzero, tagged
packets must have a VLAN Identifier that matches
the value in order to match the rule.
Only the least significant 12 bits of this objects
value are valid.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.7.2"
View at oid-info.com
This object applies only to Ethernet frames
using the 802.1P/Q tag header.
If this object's value is nonzero, tagged
packets must have a VLAN Identifier that matches
the value in order to match the rule.
Only the least significant 12 bits of this object's
value are valid.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 0.
Parsed from file DOCS-QOS-MIB-ipcdn-05.txt
Company: None
Module: DOCS-QOS-MIB
This object applies only to Ethernet frames
using the 802.1P/Q tag header.
If this object's value is nonzero, tagged
packets must have a VLAN Identifier that matches
the value in order to match the rule.
Only the least significant 12 bits of this object's
value are valid.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 0.
docsQosPktClassVlanId OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This object applies only to Ethernet frames using the 802.1P/Q tag header. If this object's value is nonzero, tagged packets must have a VLAN Identifier that matches the value in order to match the rule. Only the least significant 12 bits of this object's value are valid. If the referenced parameter is not present in the classifier, the value of this object is reported as 0. " REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.7.2" ::= { docsQosPktClassEntry 24 }
docsQosPktClassVlanId OBJECT-TYPE SYNTAX INTEGER(0..4095) ACCESS read-only STATUS mandatory DESCRIPTION "This object applies only to Ethernet frames using the 802.1P/Q tag header. If this object's value is nonzero, tagged packets must have a VLAN Identifier that matches the value in order to match the rule. Only the least significant 12 bits of this object's value are valid. If the referenced parameter is not present in the classifier, the value of this object is reported as 0." REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.7.2" ::= { docsQosPktClassEntry 24 }
Automatically extracted from Cisco "SNMP v2 MIBs".
docsQosPktClassVlanId OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This object applies only to Ethernet frames using the 802.1P/Q tag header. If this object's value is nonzero, tagged packets must have a VLAN Identifier that matches the value in order to match the rule. Only the least significant 12 bits of this object's value are valid. If the referenced parameter is not present in the classifier, the value of this object is reported as 0. " REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.7.2" ::= { docsQosPktClassEntry 24 }
docsQosPktClassVlanId OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This object applies only to Ethernet frames using the 802.1P/Q tag header. If this object's value is nonzero, tagged packets must have a VLAN Identifier that matches the value in order to match the rule. Only the least significant 12 bits of this object's value are valid. If the referenced parameter is not present in the classifier, the value of this object is reported as 0. " REFERENCE "SP-RFIv1.1-I07-010829, Appendix C.2.1.7.2" ::= { docsQosPktClassEntry 24 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.127.7.1.1.1.1 | docsQosPktClassId | 0 | 0 | Index assigned to packet classifier entry by the CMTS which is unique per service flow. |
| 1.3.6.1.2.1.10.127.7.1.1.1.2 | docsQosPktClassDirection | 0 | 0 | Indicates the direction to which the classifier is applied. |
| 1.3.6.1.2.1.10.127.7.1.1.1.3 | docsQosPktClassPriority | 0 | 0 | The value specifies the order of evaluation of the classifiers. The higher the value the higher the priority. The value of 0 is us… |
| 1.3.6.1.2.1.10.127.7.1.1.1.4 | docsQosPktClassIpTosLow | 0 | 0 | The low value of a range of TOS byte values. If the referenced parameter is not present in a classifier, this object reports the … |
| 1.3.6.1.2.1.10.127.7.1.1.1.5 | docsQosPktClassIpTosHigh | 0 | 0 | The 8-bit high value of a range of TOS byte values. If the referenced parameter is not present in a classifier, this object report… |
| 1.3.6.1.2.1.10.127.7.1.1.1.6 | docsQosPktClassIpTosMask | 0 | 0 | The mask value is bitwise ANDed with TOS byte in an IP packet and this value is used check range checking of TosLow and TosHigh. I… |
| 1.3.6.1.2.1.10.127.7.1.1.1.7 | docsQosPktClassIpProtocol | 0 | 0 | This object indicates the value of the IP Protocol field required for IP packets to match this rule. The value 256 matches traffic… |
| 1.3.6.1.2.1.10.127.7.1.1.1.8 | docsQosPktClassIpSourceAddr | 0 | 0 | This object is deprecated in favor of the object pair docsQosPktClassInetSourceAddrType and docsQosPktClassInetSourceAddr. Agents… |
| 1.3.6.1.2.1.10.127.7.1.1.1.9 | docsQosPktClassIpSourceMask | 0 | 0 | This object specifies which bits of a packet's IP Source Address that are compared to match this rule. An IP packet matches the ru… |
| 1.3.6.1.2.1.10.127.7.1.1.1.10 | docsQosPktClassIpDestAddr | 0 | 0 | This object is deprecated in favor of the object pair docsQosPktClassInetDestAddrType and docsQosPktClassInetDestAddr. Agents tha… |
| 1.3.6.1.2.1.10.127.7.1.1.1.11 | docsQosPktClassIpDestMask | 0 | 0 | This object specifies which bits of a packet's IP Destination Address that are compared to match this rule. An IP packet matches t… |
| 1.3.6.1.2.1.10.127.7.1.1.1.12 | docsQosPktClassSourcePortStart | 0 | 0 | This object specifies the low end inclusive range of TCP/UDP source port numbers to which a packet is compared. This object is ir… |
| 1.3.6.1.2.1.10.127.7.1.1.1.13 | docsQosPktClassSourcePortEnd | 0 | 0 | This object specifies the high end inclusive range of TCP/UDP source port numbers to which a packet is compared. This object is i… |
| 1.3.6.1.2.1.10.127.7.1.1.1.14 | docsQosPktClassDestPortStart | 0 | 0 | This object specifies the low end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the refere… |
| 1.3.6.1.2.1.10.127.7.1.1.1.15 | docsQosPktClassDestPortEnd | 0 | 0 | This object specifies the high end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the refer… |
| 1.3.6.1.2.1.10.127.7.1.1.1.16 | docsQosPktClassDestMacAddr | 0 | 0 | An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with docsQosPktClassDestMacMask equals the val… |
| 1.3.6.1.2.1.10.127.7.1.1.1.17 | docsQosPktClassDestMacMask | 0 | 0 | An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with docsQosPktClassDestMacMask equals the val… |
| 1.3.6.1.2.1.10.127.7.1.1.1.18 | docsQosPktClassSourceMacAddr | 0 | 0 | An Ethernet packet matches this entry when its source MAC address equals the value of this object. If the referenced parameter is … |
| 1.3.6.1.2.1.10.127.7.1.1.1.19 | docsQosPktClassEnetProtocolType | 0 | 0 | This object indicates the format of the layer 3 protocol id in the Ethernet packet. A value of none(0) means that the rule does n… |
| 1.3.6.1.2.1.10.127.7.1.1.1.20 | docsQosPktClassEnetProtocol | 0 | 0 | If docsQosEthPktClassProtocolType is none(0), this object is ignored when considering whether a packet matches the current rule. I… |
| 1.3.6.1.2.1.10.127.7.1.1.1.21 | docsQosPktClassUserPriApplies | 0 | 0 | This object is obsolete. |
| 1.3.6.1.2.1.10.127.7.1.1.1.22 | docsQosPktClassUserPriLow | 0 | 0 | This object applies only to Ethernet frames using the 802.1P/Q tag header (indicated with EtherType 0x8100). Such frames include … |
| 1.3.6.1.2.1.10.127.7.1.1.1.23 | docsQosPktClassUserPriHigh | 0 | 0 | This object applies only to Ethernet frames using the 802.1P/Qtag header (indicated with EtherType 0x8100). Such frames include a… |
| 1.3.6.1.2.1.10.127.7.1.1.1.25 | docsQosPktClassState | 0 | 0 | This object indicates whether or not the classifier is enabled to classify packets to a Service Flow. If the referenced parameter… |
| 1.3.6.1.2.1.10.127.7.1.1.1.26 | docsQosPktClassPkts | 0 | 0 | This object counts the number of packets that have been classified using this entry. |
| 1.3.6.1.2.1.10.127.7.1.1.1.27 | docsQosPktClassBitMap | 0 | 0 | This object indicates which parameter encodings were actually present in the DOCSIS packet classifier encoding signalled in the D… |
| 1.3.6.1.2.1.10.127.7.1.1.1.28 | docsQosPktClassInetSourceAddrType | 0 | 0 | The type of the internet address for docsQosPktClassInetSourceAddr. This type must be the same as the docsQosPktClassInetSourceMa… |
| 1.3.6.1.2.1.10.127.7.1.1.1.29 | docsQosPktClassInetSourceAddr | 0 | 0 | This object specifies the value of the IP Source Address required for packets to match this rule. An IP packet matches the rule w… |
| 1.3.6.1.2.1.10.127.7.1.1.1.30 | docsQosPktClassInetSourceMaskType | 0 | 0 | The type of the internet address for docsQosPktClassInetSourceMask. This type must be the same as the docsQosPktClassInetSourceAd… |
| 1.3.6.1.2.1.10.127.7.1.1.1.31 | docsQosPktClassInetSourceMask | 0 | 0 | This object specifies which bits of a packet's IP Source Address that are compared to match this rule. An IP packet matches the ru… |
| 1.3.6.1.2.1.10.127.7.1.1.1.32 | docsQosPktClassInetDestAddrType | 0 | 0 | The type of the internet address for docsQosPktClassInetDestAddr. This type must be the same as the docsQosPktClassInetDestMaskTy… |
| 1.3.6.1.2.1.10.127.7.1.1.1.33 | docsQosPktClassInetDestAddr | 0 | 0 | This object specifies the value of the IP Destination Address required for packets to match this rule. An IP packet matches the r… |
| 1.3.6.1.2.1.10.127.7.1.1.1.34 | docsQosPktClassInetDestMaskType | 0 | 0 | The type of the internet address for docsQosPktClassInetDestMask. This type must be the same as the docsQosPktClassInetDestAddrTy… |
| 1.3.6.1.2.1.10.127.7.1.1.1.35 | docsQosPktClassInetDestMask | 0 | 0 | This object specifies which bits of a packet's IP Destination Address that are compared to match this rule. An IP packet matches t… |