optIfOTUkTraceIdentifierAccepted OBJECT-TYPE
SYNTAX OptIfAcTI
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual trace identifier accepted.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where optIfOTUkDirectionality has the value source(2).
The value of this object is unspecified when
optIfOTUkCurrentStatus indicates a near-end defect
(i.e., ssf(3), lof(4), ais(5), lom(6)) that prevents
extraction of the trace message."
View at oid-info.com
The actual trace identifier accepted.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where optIfOTUkDirectionality has the value source(2).
The value of this object is unspecified when
optIfOTUkCurrentStatus indicates a near-end defect
(i.e., ssf(3), lof(4), ais(5), lom(6)) that prevents
extraction of the trace message.
Parsed from file rfc3591-Optical-Interface-Type.mib.txt
Company: None
Module: OPT-IF-MIB
The actual trace identifier accepted.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where optIfOTUkDirectionality has the value source(2).
The value of this object is unspecified when
optIfOTUkCurrentStatus indicates a near-end defect
(i.e., ssf(3), lof(4), ais(5), lom(6)) that prevents
extraction of the trace message.
Parsed from file OPT-IF-MIB.mib
Module: OPT-IF-MIB
Automatically extracted from RFC3591
optIfOTUkTraceIdentifierAccepted OBJECT-TYPE SYNTAX OptIfAcTI MAX-ACCESS read-only STATUS current DESCRIPTION "The actual trace identifier accepted. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). The value of this object is unspecified when optIfOTUkCurrentStatus indicates a near-end defect (i.e., ssf(3), lof(4), ais(5), lom(6)) that prevents extraction of the trace message." ::= { optIfOTUkConfigEntry 6 }
optIfOTUkTraceIdentifierAccepted OBJECT-TYPE SYNTAX OptIfAcTI MAX-ACCESS read-only STATUS current DESCRIPTION "The actual trace identifier accepted. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where optIfOTUkDirectionality has the value source(2). The value of this object is unspecified when optIfOTUkCurrentStatus indicates a near-end defect (i.e., ssf(3), lof(4), ais(5), lom(6)) that prevents extraction of the trace message." ::= { optIfOTUkConfigEntry 6 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.133.1.7.1.1.1 | optIfOTUkDirectionality | 0 | 0 | Indicates the directionality of the entity. |
| 1.3.6.1.2.1.10.133.1.7.1.1.2 | optIfOTUkBitRateK | 0 | 0 | Indicates the bit rate of the entity. |
| 1.3.6.1.2.1.10.133.1.7.1.1.3 | optIfOTUkTraceIdentifierTransmitted | 0 | 0 | The trace identifier transmitted. This object is applicable when optIfOTUkDirectionality has the value source(2) or bidirectional… |
| 1.3.6.1.2.1.10.133.1.7.1.1.4 | optIfOTUkDAPIExpected | 0 | 0 | The DAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality h… |
| 1.3.6.1.2.1.10.133.1.7.1.1.5 | optIfOTUkSAPIExpected | 0 | 0 | The SAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when optIfOTUkDirectionality h… |
| 1.3.6.1.2.1.10.133.1.7.1.1.7 | optIfOTUkTIMDetMode | 0 | 0 | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is only applicable to the sink function… |
| 1.3.6.1.2.1.10.133.1.7.1.1.8 | optIfOTUkTIMActEnabled | 0 | 0 | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is only applicable to th… |
| 1.3.6.1.2.1.10.133.1.7.1.1.9 | optIfOTUkDEGThr | 0 | 0 | Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the p… |
| 1.3.6.1.2.1.10.133.1.7.1.1.10 | optIfOTUkDEGM | 0 | 0 | Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfOTUkDEGM consecuti… |
| 1.3.6.1.2.1.10.133.1.7.1.1.11 | optIfOTUkSinkAdaptActive | 0 | 0 | Indicates whether the sink adaptation function is activated or not. This object is only applicable to the sink function, i.e., onl… |
| 1.3.6.1.2.1.10.133.1.7.1.1.12 | optIfOTUkSourceAdaptActive | 0 | 0 | Indicates whether the source adaptation function is activated or not. This object is only applicable to the source function, i.e.… |
| 1.3.6.1.2.1.10.133.1.7.1.1.13 | optIfOTUkSinkFECEnabled | 0 | 0 | If Forward Error Correction (FEC) is supported, this object indicates whether FEC at the OTUk sink adaptation function is enabled… |
| 1.3.6.1.2.1.10.133.1.7.1.1.14 | optIfOTUkCurrentStatus | 0 | 0 | Indicates the defect condition of the entity, if any. This object is only applicable to the sink function, i.e., only when optIfO… |