optIfODUkNimDEGM OBJECT-TYPE
SYNTAX OptIfDEGM
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfODUkNimDEGM
consecutive bad PM Seconds are detected."
View at oid-info.com
Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfODUkNimDEGM
consecutive bad PM Seconds are detected.
Parsed from file rfc3591-Optical-Interface-Type.mib.txt
Company: None
Module: OPT-IF-MIB
Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfODUkNimDEGM
consecutive bad PM Seconds are detected.
Parsed from file OPT-IF-MIB.mib
Module: OPT-IF-MIB
Automatically extracted from RFC3591
optIfODUkNimDEGM OBJECT-TYPE SYNTAX OptIfDEGM MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfODUkNimDEGM consecutive bad PM Seconds are detected." ::= { optIfODUkNimConfigEntry 8 }
optIfODUkNimDEGM OBJECT-TYPE SYNTAX OptIfDEGM MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfODUkNimDEGM consecutive bad PM Seconds are detected." ::= { optIfODUkNimConfigEntry 8 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.133.1.8.4.1.1 | optIfODUkNimDirectionality | 0 | 0 | Specifies the monitor point for the ODUk Path non-intrusive monitoring function. The value source(2) is not allowed if the corre… |
1.3.6.1.2.1.10.133.1.8.4.1.2 | optIfODUkNimDAPIExpected | 0 | 0 | The DAPI expected by the receiver. This object has no effect if optIfODUkNimTIMDetMode has the value off(1) or sapi(3). |
1.3.6.1.2.1.10.133.1.8.4.1.3 | optIfODUkNimSAPIExpected | 0 | 0 | The SAPI expected by the receiver. This object has no effect if optIfODUkNimTIMDetMode has the value off(1) or dapi(2). |
1.3.6.1.2.1.10.133.1.8.4.1.4 | optIfODUkNimTraceIdentifierAccepted | 0 | 0 | The actual trace identifier accepted. The value of this object is unspecified if optIfODUkNimCurrentStatus has any of the bit po… |
1.3.6.1.2.1.10.133.1.8.4.1.5 | optIfODUkNimTIMDetMode | 0 | 0 | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. |
1.3.6.1.2.1.10.133.1.8.4.1.6 | optIfODUkNimTIMActEnabled | 0 | 0 | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. |
1.3.6.1.2.1.10.133.1.8.4.1.7 | optIfODUkNimDEGThr | 0 | 0 | Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the p… |
1.3.6.1.2.1.10.133.1.8.4.1.9 | optIfODUkNimCurrentStatus | 0 | 0 | Indicates the defect condition of the entity, if any. The value of this object is unspecified if optIfODUkNimRowStatus has any v… |
1.3.6.1.2.1.10.133.1.8.4.1.10 | optIfODUkNimRowStatus | 0 | 0 | This columnar object is used for creating and deleting a conceptual row of the optIfODUkNim config table. It is used to model the… |