This notification is generated when the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsL3VpnVrfMaxRouteThreshold. In cases where
mplsL3VpnVrfConfHighRteThresh is set to the same value
as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh
need not be exceeded; rather, just reached for this notification
to be issued.
Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval
at which the this notification will be reissued after the
maximum value has been exceeded (or reached if
mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are
equal) and the initial notification has been issued. This value
is intended to prevent continuous generation of notifications by
an agent in the event that routes are continually added to a VRF
after it has reached its maximum value. The default value is 0
minutes. If this value is set to 0, the agent should only issue
a single notification at the time that the maximum threshold has
been reached, and should not issue any more notifications until
the value of routes has fallen below the configured threshold
value.
Parsed from file MPLS-L3VPN-STD-MIB.mib
Module: MPLS-L3VPN-STD-MIB
mplsL3VpnVrfNumVrfRouteMaxThreshExceeded NOTIFICATION-TYPE
OBJECTS { mplsL3VpnVrfPerfCurrNumRoutes,
mplsL3VpnVrfConfHighRteThresh
}
STATUS current
DESCRIPTION
"This notification is generated when the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsL3VpnVrfMaxRouteThreshold. In cases where
mplsL3VpnVrfConfHighRteThresh is set to the same value
as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh
need not be exceeded; rather, just reached for this notification
to be issued.
Note that mplsL3VpnVrfConfRteMxThrshtime denotes the interval
at which the this notification will be reissued after the
maximum value has been exceeded (or reached if
mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are
equal) and the initial notification has been issued. This value
is intended to prevent continuous generation of notifications by
an agent in the event that routes are continually added to a VRF
after it has reached its maximum value. The default value is 0
minutes. If this value is set to 0, the agent should only issue
a single notification at the time that the maximum threshold has
been reached, and should not issue any more notifications until
the value of routes has fallen below the configured threshold
value."
View at oid-info.com
This notification is generated when the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsL3VpnVrfMaxRouteThreshold. In cases where
mplsL3VpnVrfConfHighRteThresh is set to the same value
as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh
need not be exceeded; rather, just reached for this notification
to be issued.
Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval
at which the this notification will be reissued after the
maximum value has been exceeded (or reached if
mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are
equal) and the initial notification has been issued. This value
is intended to prevent continuous generation of notifications by
an agent in the event that routes are continually added to a VRF
after it has reached its maximum value. The default value is 0
minutes. If this value is set to 0, the agent should only issue
a single notification at the time that the maximum threshold has
been reached, and should not issue any more notifications until
the value of routes has fallen below the configured threshold
value.
Parsed from file rfc4382-MPLS__BGP-Layer-3-Virtual-Private-Network-VPN.mib.txt
Company: None
Module: MPLS-L3VPN-STD-MIB
This notification is generated when the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsL3VpnVrfMaxRouteThreshold. In cases where
mplsL3VpnVrfConfHighRteThresh is set to the same value
as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh
need not be exceeded; rather, just reached for this notification
to be issued.
Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval
at which the this notification will be reissued after the
maximum value has been exceeded (or reached if
mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are
equal) and the initial notification has been issued. This value
is intended to prevent continuous generation of notifications by
an agent in the event that routes are continually added to a VRF
after it has reached its maximum value. The default value is 0
minutes. If this value is set to 0, the agent should only issue
a single notification at the time that the maximum threshold has
been reached, and should not issue any more notifications until
the value of routes has fallen below the configured threshold
value.
mplsL3VpnVrfNumVrfRouteMaxThreshExceeded NOTIFICATION-TYPE OBJECTS { mplsL3VpnVrfPerfCurrNumRoutes, mplsL3VpnVrfConfHighRteThresh } STATUS current DESCRIPTION "This notification is generated when the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsL3VpnVrfMaxRouteThreshold. In cases where mplsL3VpnVrfConfHighRteThresh is set to the same value as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh need not be exceeded; rather, just reached for this notification to be issued. Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at which the this notification will be reissued after the maximum value has been exceeded (or reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value. The default value is 0 minutes. If this value is set to 0, the agent should only issue a single notification at the time that the maximum threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value." ::= { mplsL3VpnNotifications 4 }
mplsL3VpnVrfNumVrfRouteMaxThreshExceeded NOTIFICATION-TYPE OBJECTS { mplsL3VpnVrfPerfCurrNumRoutes, mplsL3VpnVrfConfHighRteThresh } STATUS current DESCRIPTION "This notification is generated when the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsL3VpnVrfMaxRouteThreshold. In cases where mplsL3VpnVrfConfHighRteThresh is set to the same value as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh need not be exceeded; rather, just reached for this notification to be issued. Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at which the this notification will be reissued after the maximum value has been exceeded (or reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value. The default value is 0 minutes. If this value is set to 0, the agent should only issue a single notification at the time that the maximum threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value." ::= { mplsL3VpnNotifications 4 }
mplsL3VpnVrfNumVrfRouteMaxThreshExceeded NOTIFICATION-TYPE OBJECTS { mplsL3VpnVrfPerfCurrNumRoutes, mplsL3VpnVrfConfHighRteThresh } STATUS current DESCRIPTION "This notification is generated when the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsL3VpnVrfMaxRouteThreshold. In cases where mplsL3VpnVrfConfHighRteThresh is set to the same value as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh need not be exceeded; rather, just reached for this notification to be issued. Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at which the this notification will be reissued after the maximum value has been exceeded (or reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value. The default value is 0 minutes. If this value is set to 0, the agent should only issue a single notification at the time that the maximum threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value." ::= { mplsL3VpnNotifications 4 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.11.0.1 | mplsL3VpnVrfUp | 0 | 0 | This notification is generated when: a. No interface is associated with this VRF, and the first (and only first) interface associ… |
| 1.3.6.1.2.1.10.166.11.0.2 | mplsL3VpnVrfDown | 0 | 0 | This notification is generated when: a. One interface is associated with this VRF, and the ifOperStatus of this interface changes… |
| 1.3.6.1.2.1.10.166.11.0.3 | mplsL3VpnVrfRouteMidThreshExceeded | 0 | 0 | This notification is generated when the number of routes contained by the specified VRF exceeds the value indicated by mplsL3VpnV… |
| 1.3.6.1.2.1.10.166.11.0.5 | mplsL3VpnNumVrfSecIllglLblThrshExcd | 0 | 0 | This notification is generated when the number of illegal label violations on a VRF as indicated by mplsL3VpnVrfSecIllegalLblVltn… |
| 1.3.6.1.2.1.10.166.11.0.6 | mplsL3VpnNumVrfRouteMaxThreshCleared | 0 | 0 | This notification is generated only after the number of routes contained by the specified VRF exceeds or attempts to exceed the m… |