This notification is generated only after the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsVrfMaxRouteThreshold, and then falls below this value. The
emission of this notification informs the operator that the
error condition has been cleared without the operator having to
query the device.
Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at
which the mplsNumVrfRouteMaxThreshExceeded notification will
be reissued after the maximum value has been exceeded (or
reached if mplsL3VpnVrfConfMaxRoutes and
mplsL3VpnVrfConfHighRteThresh are equal) and the initial
notification has been issued. Therefore,
the generation of this notification should also be emitted with
this same frequency (assuming that the error condition is
cleared). Specifically, if the error condition is reached and
cleared several times during the period of time specified in
mplsL3VpnVrfConfRteMxThrshTime, only a single notification will
be issued to indicate the first instance of the error condition
as well as the first time the error condition is cleared.
This behavior is intended to prevent continuous generation of
notifications by an agent in the event that routes are
continually added and removed to/from a VRF after it has
reached its maximum value. The default value is 0. If this
value is set to 0, the agent should issue a notification
whenever the maximum threshold has been cleared.
Parsed from file MPLS-L3VPN-STD-MIB.mib
Module: MPLS-L3VPN-STD-MIB
mplsL3VpnNumVrfRouteMaxThreshCleared NOTIFICATION-TYPE
OBJECTS { mplsL3VpnVrfPerfCurrNumRoutes,
mplsL3VpnVrfConfHighRteThresh
}
STATUS current
DESCRIPTION
"This notification is generated only after the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsVrfMaxRouteThreshold, and then falls below this value. The
emission of this notification informs the operator that the
error condition has been cleared without the operator having to
query the device.
Note that mplsL3VpnVrfConfRteMxThrshtime denotes the interval at
which the mplsNumVrfRouteMaxThreshExceeded notification will
be reissued after the maximum value has been exceeded (or
reached if mplsL3VpnVrfConfMaxRoutes and
mplsL3VpnVrfConfHighRteThresh are equal) and the initial
notification has been issued. Therefore,
the generation of this notification should also be emitted with
this same frequency (assuming that the error condition is
cleared). Specifically, if the error condition is reached and
cleared several times during the period of time specified in
mplsL3VpnVrfConfRteMxThrshtime, only a single notification will
be issued to indicate the first instance of the error condition
as well as the first time the error condition is cleared.
This behavior is intended to prevent continuous generation of
notifications by an agent in the event that routes are
continually added and removed to/from a VRF after it has
reached its maximum value. The default value is 0. If this
value is set to 0, the agent should issue a notification
whenever the maximum threshold has been cleared."
View at oid-info.com
This notification is generated only after the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsVrfMaxRouteThreshold, and then falls below this value. The
emission of this notification informs the operator that the
error condition has been cleared without the operator having to
query the device.
Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at
which the mplsNumVrfRouteMaxThreshExceeded notification will
be reissued after the maximum value has been exceeded (or
reached if mplsL3VpnVrfConfMaxRoutes and
mplsL3VpnVrfConfHighRteThresh are equal) and the initial
notification has been issued. Therefore,
the generation of this notification should also be emitted with
this same frequency (assuming that the error condition is
cleared). Specifically, if the error condition is reached and
cleared several times during the period of time specified in
mplsL3VpnVrfConfRteMxThrshTime, only a single notification will
be issued to indicate the first instance of the error condition
as well as the first time the error condition is cleared.
This behavior is intended to prevent continuous generation of
notifications by an agent in the event that routes are
continually added and removed to/from a VRF after it has
reached its maximum value. The default value is 0. If this
value is set to 0, the agent should issue a notification
whenever the maximum threshold has been cleared.
Parsed from file rfc4382-MPLS__BGP-Layer-3-Virtual-Private-Network-VPN.mib.txt
Company: None
Module: MPLS-L3VPN-STD-MIB
This notification is generated only after the number of routes
contained by the specified VRF exceeds or attempts to exceed
the maximum allowed value as indicated by
mplsVrfMaxRouteThreshold, and then falls below this value. The
emission of this notification informs the operator that the
error condition has been cleared without the operator having to
query the device.
Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at
which the mplsNumVrfRouteMaxThreshExceeded notification will
be reissued after the maximum value has been exceeded (or
reached if mplsL3VpnVrfConfMaxRoutes and
mplsL3VpnVrfConfHighRteThresh are equal) and the initial
notification has been issued. Therefore,
the generation of this notification should also be emitted with
this same frequency (assuming that the error condition is
cleared). Specifically, if the error condition is reached and
cleared several times during the period of time specified in
mplsL3VpnVrfConfRteMxThrshTime, only a single notification will
be issued to indicate the first instance of the error condition
as well as the first time the error condition is cleared.
This behavior is intended to prevent continuous generation of
notifications by an agent in the event that routes are
continually added and removed to/from a VRF after it has
reached its maximum value. The default value is 0. If this
value is set to 0, the agent should issue a notification
whenever the maximum threshold has been cleared.
mplsL3VpnNumVrfRouteMaxThreshCleared NOTIFICATION-TYPE OBJECTS { mplsL3VpnVrfPerfCurrNumRoutes, mplsL3VpnVrfConfHighRteThresh } STATUS current DESCRIPTION "This notification is generated only after the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsVrfMaxRouteThreshold, and then falls below this value. The emission of this notification informs the operator that the error condition has been cleared without the operator having to query the device. Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at which the mplsNumVrfRouteMaxThreshExceeded notification will be reissued after the maximum value has been exceeded (or reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. Therefore, the generation of this notification should also be emitted with this same frequency (assuming that the error condition is cleared). Specifically, if the error condition is reached and cleared several times during the period of time specified in mplsL3VpnVrfConfRteMxThrshTime, only a single notification will be issued to indicate the first instance of the error condition as well as the first time the error condition is cleared. This behavior is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added and removed to/from a VRF after it has reached its maximum value. The default value is 0. If this value is set to 0, the agent should issue a notification whenever the maximum threshold has been cleared." ::= { mplsL3VpnNotifications 6 }
mplsL3VpnNumVrfRouteMaxThreshCleared NOTIFICATION-TYPE OBJECTS { mplsL3VpnVrfPerfCurrNumRoutes, mplsL3VpnVrfConfHighRteThresh } STATUS current DESCRIPTION "This notification is generated only after the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsVrfMaxRouteThreshold, and then falls below this value. The emission of this notification informs the operator that the error condition has been cleared without the operator having to query the device. Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at which the mplsNumVrfRouteMaxThreshExceeded notification will be reissued after the maximum value has been exceeded (or reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. Therefore, the generation of this notification should also be emitted with this same frequency (assuming that the error condition is cleared). Specifically, if the error condition is reached and cleared several times during the period of time specified in mplsL3VpnVrfConfRteMxThrshTime, only a single notification will be issued to indicate the first instance of the error condition as well as the first time the error condition is cleared. This behavior is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added and removed to/from a VRF after it has reached its maximum value. The default value is 0. If this value is set to 0, the agent should issue a notification whenever the maximum threshold has been cleared." ::= { mplsL3VpnNotifications 6 }
mplsL3VpnNumVrfRouteMaxThreshCleared NOTIFICATION-TYPE OBJECTS { mplsL3VpnVrfPerfCurrNumRoutes, mplsL3VpnVrfConfHighRteThresh } STATUS current DESCRIPTION "This notification is generated only after the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsVrfMaxRouteThreshold, and then falls below this value. The emission of this notification informs the operator that the error condition has been cleared without the operator having to query the device. Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at which the mplsNumVrfRouteMaxThreshExceeded notification will be reissued after the maximum value has been exceeded (or reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. Therefore, the generation of this notification should also be emitted with this same frequency (assuming that the error condition is cleared). Specifically, if the error condition is reached and cleared several times during the period of time specified in mplsL3VpnVrfConfRteMxThrshTime, only a single notification will be issued to indicate the first instance of the error condition as well as the first time the error condition is cleared. This behavior is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added and removed to/from a VRF after it has reached its maximum value. The default value is 0. If this value is set to 0, the agent should issue a notification whenever the maximum threshold has been cleared." ::= { mplsL3VpnNotifications 6 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.11.0.1 | mplsL3VpnVrfUp | 0 | 0 | This notification is generated when: a. No interface is associated with this VRF, and the first (and only first) interface associ… |
| 1.3.6.1.2.1.10.166.11.0.2 | mplsL3VpnVrfDown | 0 | 0 | This notification is generated when: a. One interface is associated with this VRF, and the ifOperStatus of this interface changes… |
| 1.3.6.1.2.1.10.166.11.0.3 | mplsL3VpnVrfRouteMidThreshExceeded | 0 | 0 | This notification is generated when the number of routes contained by the specified VRF exceeds the value indicated by mplsL3VpnV… |
| 1.3.6.1.2.1.10.166.11.0.4 | mplsL3VpnVrfNumVrfRouteMaxThreshExceeded | 0 | 0 | This notification is generated when the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum… |
| 1.3.6.1.2.1.10.166.11.0.5 | mplsL3VpnNumVrfSecIllglLblThrshExcd | 0 | 0 | This notification is generated when the number of illegal label violations on a VRF as indicated by mplsL3VpnVrfSecIllegalLblVltn… |