Denotes maximum number of routes that this VRF is
configured to hold. This value MUST be less than or
equal to mplsL3VpnVrfConfMaxPossRts unless it is set
to 0.
Parsed from file MPLS-L3VPN-STD-MIB.mib
Module: MPLS-L3VPN-STD-MIB
Denotes maximum number of routes that this VRF is
configured to hold. This value MUST be less than or
equal to mplsL3VpnVrfConfMaxPossRts unless it is set
to 0.
Denotes maximum number of routes that this VRF is
configured to hold. This value MUST be less than or
equal to mplsL3VpnVrfConfMaxPossRts unless it is set
to 0.
Parsed from file rfc4382-MPLS__BGP-Layer-3-Virtual-Private-Network-VPN.mib.txt
Company: None
Module: MPLS-L3VPN-STD-MIB
Denotes maximum number of routes that this VRF is
configured to hold. This value MUST be less than or
equal to mplsL3VpnVrfConfMaxPossRts unless it is set
to 0.
mplsL3VpnVrfConfMaxRoutes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Denotes maximum number of routes that this VRF is configured to hold. This value MUST be less than or equal to mplsL3VpnVrfConfMaxPossRts unless it is set to 0." DEFVAL { 0 } ::= { mplsL3VpnVrfEntry 11 }
mplsL3VpnVrfConfMaxRoutes OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "Denotes maximum number of routes that this VRF is configured to hold. This value MUST be less than or equal to mplsL3VpnVrfConfMaxPossRts unless it is set to 0." DEFVAL { 0 } ::= { mplsL3VpnVrfEntry 11 }
Vendor: Cisco Systems
Module: MPLS-L3VPN-STD-MIB (MPLS-L3VPN-STD-MIB-V1SMI.my)
Type: TABULAR
Access: read-write
Syntax: Gauge
Automatically extracted from www.mibdepot.com
mplsL3VpnVrfConfMaxRoutes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Denotes maximum number of routes that this VRF is configured to hold. This value MUST be less than or equal to mplsL3VpnVrfConfMaxPossRts unless it is set to 0." DEFVAL { 0 } ::= { mplsL3VpnVrfEntry 11 }
mplsL3VpnVrfConfMaxRoutes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Denotes maximum number of routes that this VRF is configured to hold. This value MUST be less than or equal to mplsL3VpnVrfConfMaxPossRts unless it is set to 0." DEFVAL { 0 } ::= { mplsL3VpnVrfEntry 11 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.11.1.2.2.1.1 | mplsL3VpnVrfName | 0 | 0 | The human-readable name of this VPN. This MAY be equivalent to the [RFC2685] VPN-ID, but may also vary. If it is set to the VPN… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.2 | mplsL3VpnVrfVpnId | 0 | 0 | The VPN ID as specified in [RFC2685]. If a VPN ID has not been specified for this VRF, then this variable SHOULD be set to a zer… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.3 | mplsL3VpnVrfDescription | 0 | 0 | The human-readable description of this VRF. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.4 | mplsL3VpnVrfRD | 0 | 0 | The route distinguisher for this VRF. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.5 | mplsL3VpnVrfCreationTime | 0 | 0 | The time at which this VRF entry was created. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.6 | mplsL3VpnVrfOperStatus | 0 | 0 | Denotes whether or not a VRF is operational. A VRF is up(1) when there is at least one interface associated with the VRF whose i… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.7 | mplsL3VpnVrfActiveInterfaces | 0 | 0 | Total number of interfaces connected to this VRF with ifOperStatus = up(1). This value should increase when an interface is assoc… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.8 | mplsL3VpnVrfAssociatedInterfaces | 0 | 0 | Total number of interfaces connected to this VRF (independent of ifOperStatus type). |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.9 | mplsL3VpnVrfConfMidRteThresh | 0 | 0 | Denotes mid-level water marker for the number of routes that this VRF may hold. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.10 | mplsL3VpnVrfConfHighRteThresh | 0 | 0 | Denotes high-level water marker for the number of routes that this VRF may hold. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.12 | mplsL3VpnVrfConfLastChanged | 0 | 0 | The value of sysUpTime at the time of the last change of this table entry, which includes changes of VRF parameters defined in th… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.13 | mplsL3VpnVrfConfRowStatus | 0 | 0 | This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no obj… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.14 | mplsL3VpnVrfConfAdminStatus | 0 | 0 | Indicates the desired operational status of this VRF. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.15 | mplsL3VpnVrfConfStorageType | 0 | 0 | The storage type for this VPN VRF entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar… |