Denotes whether or not a VRF is operational. A VRF is
up(1) when there is at least one interface associated
with the VRF whose ifOperStatus is up(1). A VRF is
down(2) when:
a. There does not exist at least one interface whose
ifOperStatus is up(1).
b. There are no interfaces associated with the VRF.
Parsed from file MPLS-L3VPN-STD-MIB.mib
Module: MPLS-L3VPN-STD-MIB
Denotes whether or not a VRF is operational. A VRF is
up(1) when there is at least one interface associated
with the VRF whose ifOperStatus is up(1). A VRF is
down(2) when:
a. There does not exist at least one interface whose
ifOperStatus is up(1).
b. There are no interfaces associated with the VRF.
Denotes whether or not a VRF is operational. A VRF is
up(1) when there is at least one interface associated
with the VRF whose ifOperStatus is up(1). A VRF is
down(2) when:
a. There does not exist at least one interface whose
ifOperStatus is up(1).
b. There are no interfaces associated with the VRF.
Parsed from file rfc4382-MPLS__BGP-Layer-3-Virtual-Private-Network-VPN.mib.txt
Company: None
Module: MPLS-L3VPN-STD-MIB
Denotes whether or not a VRF is operational. A VRF is
up(1) when there is at least one interface associated
with the VRF whose ifOperStatus is up(1). A VRF is
down(2) when:
a. There does not exist at least one interface whose
ifOperStatus is up(1).
b. There are no interfaces associated with the VRF.
mplsL3VpnVrfOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes whether or not a VRF is operational. A VRF is up(1) when there is at least one interface associated with the VRF whose ifOperStatus is up(1). A VRF is down(2) when: a. There does not exist at least one interface whose ifOperStatus is up(1). b. There are no interfaces associated with the VRF." ::= { mplsL3VpnVrfEntry 6 }
mplsL3VpnVrfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Denotes whether or not a VRF is operational. A VRF is up(1) when there is at least one interface associated with the VRF whose ifOperStatus is up(1). A VRF is down(2) when: a. There does not exist at least one interface whose ifOperStatus is up(1). b. There are no interfaces associated with the VRF." ::= { mplsL3VpnVrfEntry 6 }
Vendor: Cisco Systems
Module: MPLS-L3VPN-STD-MIB (MPLS-L3VPN-STD-MIB-V1SMI.my)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
mplsL3VpnVrfOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes whether or not a VRF is operational. A VRF is up(1) when there is at least one interface associated with the VRF whose ifOperStatus is up(1). A VRF is down(2) when: a. There does not exist at least one interface whose ifOperStatus is up(1). b. There are no interfaces associated with the VRF." ::= { mplsL3VpnVrfEntry 6 }
mplsL3VpnVrfOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes whether or not a VRF is operational. A VRF is up(1) when there is at least one interface associated with the VRF whose ifOperStatus is up(1). A VRF is down(2) when: a. There does not exist at least one interface whose ifOperStatus is up(1). b. There are no interfaces associated with the VRF." ::= { mplsL3VpnVrfEntry 6 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.11.1.2.2.1.1 | mplsL3VpnVrfName | 0 | 0 | The human-readable name of this VPN. This MAY be equivalent to the [RFC2685] VPN-ID, but may also vary. If it is set to the VPN… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.2 | mplsL3VpnVrfVpnId | 0 | 0 | The VPN ID as specified in [RFC2685]. If a VPN ID has not been specified for this VRF, then this variable SHOULD be set to a zer… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.3 | mplsL3VpnVrfDescription | 0 | 0 | The human-readable description of this VRF. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.4 | mplsL3VpnVrfRD | 0 | 0 | The route distinguisher for this VRF. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.5 | mplsL3VpnVrfCreationTime | 0 | 0 | The time at which this VRF entry was created. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.7 | mplsL3VpnVrfActiveInterfaces | 0 | 0 | Total number of interfaces connected to this VRF with ifOperStatus = up(1). This value should increase when an interface is assoc… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.8 | mplsL3VpnVrfAssociatedInterfaces | 0 | 0 | Total number of interfaces connected to this VRF (independent of ifOperStatus type). |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.9 | mplsL3VpnVrfConfMidRteThresh | 0 | 0 | Denotes mid-level water marker for the number of routes that this VRF may hold. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.10 | mplsL3VpnVrfConfHighRteThresh | 0 | 0 | Denotes high-level water marker for the number of routes that this VRF may hold. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.11 | mplsL3VpnVrfConfMaxRoutes | 0 | 0 | Denotes maximum number of routes that this VRF is configured to hold. This value MUST be less than or equal to mplsL3VpnVrfConfM… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.12 | mplsL3VpnVrfConfLastChanged | 0 | 0 | The value of sysUpTime at the time of the last change of this table entry, which includes changes of VRF parameters defined in th… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.13 | mplsL3VpnVrfConfRowStatus | 0 | 0 | This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no obj… |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.14 | mplsL3VpnVrfConfAdminStatus | 0 | 0 | Indicates the desired operational status of this VRF. |
| 1.3.6.1.2.1.10.166.11.1.2.2.1.15 | mplsL3VpnVrfConfStorageType | 0 | 0 | The storage type for this VPN VRF entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar… |