Reference record for OID 1.3.6.1.2.1.10.166.3.2.8.1.5



parent
1.3.6.1.2.1.10.166.3.2.8.1 (mplsTunnelCHopEntry)
node code
5
node name
mplsTunnelCHopIpPrefixLen
dot oid
1.3.6.1.2.1.10.166.3.2.8.1.5
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCHopTable(8) mplsTunnelCHopEntry(1) mplsTunnelCHopIpPrefixLen(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCHopTable(8) mplsTunnelCHopEntry(1) mplsTunnelCHopIpPrefixLen(5)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCHopTable(8) mplsTunnelCHopEntry(1) mplsTunnelCHopIpPrefixLen(5)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCHopTable(8) mplsTunnelCHopEntry(1) mplsTunnelCHopIpPrefixLen(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCHopTable(8) mplsTunnelCHopEntry(1) mplsTunnelCHopIpPrefixLen(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) mplsStdMIB(166) mplsTeStdMIB(3) mplsTeObjects(2) mplsTunnelCHopTable(8) mplsTunnelCHopEntry(1) mplsTunnelCHopIpPrefixLen(5)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCHopTable/mplsTunnelCHopEntry/mplsTunnelCHopIpPrefixLen
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCHopTable/mplsTunnelCHopEntry/mplsTunnelCHopIpPrefixLen
  • /iso/org/dod/internet/mgmt/mib-2/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCHopTable/mplsTunnelCHopEntry/mplsTunnelCHopIpPrefixLen
  • /iso/org/dod/internet/mgmt/mib/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCHopTable/mplsTunnelCHopEntry/mplsTunnelCHopIpPrefixLen
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCHopTable/mplsTunnelCHopEntry/mplsTunnelCHopIpPrefixLen
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/mplsStdMIB/mplsTeStdMIB/mplsTeObjects/mplsTunnelCHopTable/mplsTunnelCHopEntry/mplsTunnelCHopIpPrefixLen
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/166/3/2/8/1/5

    Description by circitor

    If mplsTunnelCHopAddrType is set to ipv4(1) or
    ipv6(2), then this value will contain an
    appropriate prefix length for the IP address in
    object mplsTunnelCHopIpAddr. Otherwise this value
    is irrelevant and should be ignored.

    Parsed from file MPLS-TE-STD-MIB.mib
    Module: MPLS-TE-STD-MIB

    Description by cisco_v1

    If mplsTunnelCHopAddrType is set to ipv4(1) or
    ipv6(2), then this value will contain an
    appropriate prefix length for the IP address in
    object mplsTunnelCHopIpAddr. Otherwise this value
    is irrelevant and should be ignored.

    Description by oid_info

    mplsTunnelCHopIpPrefixLen OBJECT-TYPE
    SYNTAX InetAddressPrefixLength
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "If mplsTunnelCHopAddrType is set to ipv4(1) or
    ipv6(2), then this value will contain an
    appropriate prefix length for the IP address in
    object mplsTunnelCHopIpAddr. Otherwise this value
    is irrelevant and should be ignored.
    "
    DEFVAL { 32 }
    View at oid-info.com

    Description by mibdepot

    If mplsTunnelCHopAddrType is set to ipv4(1) or
    ipv6(2), then this value will contain an
    appropriate prefix length for the IP address in
    object mplsTunnelCHopIpAddr. Otherwise this value
    is irrelevant and should be ignored.

    Parsed from file rfc3812-MPLS-Traffic-Engineering-TE.mib.txt
    Company: None
    Module: MPLS-TE-STD-MIB

    Description by cisco

    If mplsTunnelCHopAddrType is set to ipv4(1) or
    ipv6(2), then this value will contain an
    appropriate prefix length for the IP address in
    object mplsTunnelCHopIpAddr. Otherwise this value
    is irrelevant and should be ignored.

    Information by circitor

    mplsTunnelCHopIpPrefixLen OBJECT-TYPE
   SYNTAX        InetAddressPrefixLength
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
         "If mplsTunnelCHopAddrType is set to ipv4(1) or
           ipv6(2), then this value will contain an
           appropriate prefix length for the IP address in
           object mplsTunnelCHopIpAddr. Otherwise this value
           is irrelevant and should be ignored.
          "
    DEFVAL         { 32 }
   ::= { mplsTunnelCHopEntry 5 }

    Information by cisco_v1

    mplsTunnelCHopIpPrefixLen OBJECT-TYPE
    SYNTAX InetAddressPrefixLength

    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "If mplsTunnelCHopAddrType is set to ipv4(1) or
          ipv6(2), then this value will contain an
          appropriate prefix length for the IP address in
          object mplsTunnelCHopIpAddr. Otherwise this value
          is irrelevant and should be ignored.
         "
    DEFVAL { 32 }
    ::= { mplsTunnelCHopEntry 5 }

    Information by oid_info

    Automatically extracted from RFC3812

    Information by mibdepot

    mplsTunnelCHopIpPrefixLen OBJECT-TYPE
      SYNTAX        InetAddressPrefixLength
      MAX-ACCESS    read-only
      STATUS        current
      DESCRIPTION
            "If mplsTunnelCHopAddrType is set to ipv4(1) or
              ipv6(2), then this value will contain an
              appropriate prefix length for the IP address in
              object mplsTunnelCHopIpAddr. Otherwise this value
              is irrelevant and should be ignored.
             "
       DEFVAL         { 32 }
      ::= { mplsTunnelCHopEntry 5 }

    Information by cisco

    mplsTunnelCHopIpPrefixLen OBJECT-TYPE
      SYNTAX        InetAddressPrefixLength
      MAX-ACCESS    read-only
      STATUS        current
      DESCRIPTION
            "If mplsTunnelCHopAddrType is set to ipv4(1) or
              ipv6(2), then this value will contain an
              appropriate prefix length for the IP address in
              object mplsTunnelCHopIpAddr. Otherwise this value
              is irrelevant and should be ignored.
             "
       DEFVAL         { 32 }
      ::= { mplsTunnelCHopEntry 5 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (8)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.166.3.2.8.1.1 mplsTunnelCHopListIndex 0 0 Primary index into this table identifying a
    particular computed hop list.
    1.3.6.1.2.1.10.166.3.2.8.1.2 mplsTunnelCHopIndex 0 0 Secondary index into this table identifying the
    particular hop.
    1.3.6.1.2.1.10.166.3.2.8.1.3 mplsTunnelCHopAddrType 0 0 The Hop Address Type of this tunnel hop.

    Note that lspid(5) is a valid option only
    for tunnels signaled via CRLDP.
    1.3.6.1.2.1.10.166.3.2.8.1.4 mplsTunnelCHopIpAddr 0 0 The Tunnel Hop Address for this tunnel hop.
    The type of this address is determined by the
    value of the corresponding mplsTunnelCH…
    1.3.6.1.2.1.10.166.3.2.8.1.6 mplsTunnelCHopAsNumber 0 0 If mplsTunnelCHopAddrType is set to asnumber(3),
    then this value will contain the AS number of this
    hop. Otherwise the agent shou…
    1.3.6.1.2.1.10.166.3.2.8.1.7 mplsTunnelCHopAddrUnnum 0 0 If mplsTunnelCHopAddrType is set to unnum(4), then
    this value will contain the unnumbered interface
    identifier of this hop. This …
    1.3.6.1.2.1.10.166.3.2.8.1.8 mplsTunnelCHopLspId 0 0 If mplsTunnelCHopAddrType is set to lspid(5), then
    this value will contain the LSP ID of this hop.
    This object is otherwise insig…
    1.3.6.1.2.1.10.166.3.2.8.1.9 mplsTunnelCHopType 0 0 Denotes whether this is tunnel hop is routed in a
    strict or loose fashion.