If mplsTunnelCHopAddrType is set to lspid(5), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact.
Parsed from file MPLS-TE-STD-MIB.mib
Module: MPLS-TE-STD-MIB
If mplsTunnelCHopAddrType is set to lspid(5), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact.
mplsTunnelCHopLspId OBJECT-TYPE
SYNTAX MplsLSPID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelCHopAddrType is set to lspid(5), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact."
View at oid-info.com
If mplsTunnelCHopAddrType is set to lspid(5), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact.
Parsed from file rfc3812-MPLS-Traffic-Engineering-TE.mib.txt
Company: None
Module: MPLS-TE-STD-MIB
If mplsTunnelCHopAddrType is set to lspid(5), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact.
mplsTunnelCHopLspId OBJECT-TYPE SYNTAX MplsLSPID MAX-ACCESS read-only STATUS current DESCRIPTION "If mplsTunnelCHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact." ::= { mplsTunnelCHopEntry 8 }
mplsTunnelCHopLspId OBJECT-TYPE SYNTAX MplsLSPID ACCESS read-only STATUS mandatory DESCRIPTION "If mplsTunnelCHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact." ::= { mplsTunnelCHopEntry 8 }
Automatically extracted from RFC3812
mplsTunnelCHopLspId OBJECT-TYPE SYNTAX MplsLSPID MAX-ACCESS read-only STATUS current DESCRIPTION "If mplsTunnelCHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact." ::= { mplsTunnelCHopEntry 8 }
mplsTunnelCHopLspId OBJECT-TYPE SYNTAX MplsLSPID MAX-ACCESS read-only STATUS current DESCRIPTION "If mplsTunnelCHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact." ::= { mplsTunnelCHopEntry 8 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.166.3.2.8.1.1 | mplsTunnelCHopListIndex | 0 | 0 | Primary index into this table identifying a particular computed hop list. |
1.3.6.1.2.1.10.166.3.2.8.1.2 | mplsTunnelCHopIndex | 0 | 0 | Secondary index into this table identifying the particular hop. |
1.3.6.1.2.1.10.166.3.2.8.1.3 | mplsTunnelCHopAddrType | 0 | 0 | The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP. |
1.3.6.1.2.1.10.166.3.2.8.1.4 | mplsTunnelCHopIpAddr | 0 | 0 | The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding mplsTunnelCH… |
1.3.6.1.2.1.10.166.3.2.8.1.5 | mplsTunnelCHopIpPrefixLen | 0 | 0 | If mplsTunnelCHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP addr… |
1.3.6.1.2.1.10.166.3.2.8.1.6 | mplsTunnelCHopAsNumber | 0 | 0 | If mplsTunnelCHopAddrType is set to asnumber(3), then this value will contain the AS number of this hop. Otherwise the agent shou… |
1.3.6.1.2.1.10.166.3.2.8.1.7 | mplsTunnelCHopAddrUnnum | 0 | 0 | If mplsTunnelCHopAddrType is set to unnum(4), then this value will contain the unnumbered interface identifier of this hop. This … |
1.3.6.1.2.1.10.166.3.2.8.1.9 | mplsTunnelCHopType | 0 | 0 | Denotes whether this is tunnel hop is routed in a strict or loose fashion. |