If the value of this object is 0 (zero) then
Loop Detection for Path Vectors is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection for Path Vectors is enabled,
and the Path Vector Limit is this value.
Also, the value of the object,
'mplsLdpLsrLoopDetectionCapable', must be set to
either 'pathVector(4)' or 'hopCountAndPathVector(5)',
if this object has a value greater than 0 (zero),
otherwise it is ignored.
Parsed from file MPLS-LDP-STD-MIB.mib
Module: MPLS-LDP-STD-MIB
If the value of this object is 0 (zero) then
Loop Detection for Path Vectors is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection for Path Vectors is enabled,
and the Path Vector Limit is this value.
Also, the value of the object,
'mplsLdpLsrLoopDetectionCapable', must be set to
either 'pathVector(4)' or 'hopCountAndPathVector(5)',
if this object has a value greater than 0 (zero),
otherwise it is ignored.
mplsLdpEntityPathVectorLimit OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of this object is 0 (zero) then
Loop Detection for Path Vectors is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection for Path Vectors is enabled,
and the Path Vector Limit is this value.
Also, the value of the object,
mplsLdpLsrLoopDetectionCapable, must be set to
either pathVector(4) or hopCountAndPathVector(5),
if this object has a value greater than 0 (zero),
otherwise it is ignored."
REFERENCE
"RFC3036, LDP Specification, Section 2.8 Loop Dection,
Section 3.4.5 Path Vector TLV."
View at oid-info.com
If the value of this object is 0 (zero) then
Loop Detection for Path Vectors is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection for Path Vectors is enabled,
and the Path Vector Limit is this value.
Also, the value of the object,
'mplsLdpLsrLoopDetectionCapable', must be set to
either 'pathVector(4)' or 'hopCountAndPathVector(5)',
if this object has a value greater than 0 (zero),
otherwise it is ignored.
Parsed from file rfc3815-MPLS-Label-Distribution-Protocol-LDP.mib-1.txt
Company: None
Module: MPLS-LDP-STD-MIB
If the value of this object is 0 (zero) then
Loop Detection for Path Vectors is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection for Path Vectors is enabled,
and the Path Vector Limit is this value.
Also, the value of the object,
'mplsLdpLsrLoopDetectionCapable', must be set to
either 'pathVector(4)' or 'hopCountAndPathVector(5)',
if this object has a value greater than 0 (zero),
otherwise it is ignored.
mplsLdpEntityPathVectorLimit OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of this object is 0 (zero) then Loop Detection for Path Vectors is disabled. Otherwise, if this object has a value greater than zero, then Loop Dection for Path Vectors is enabled, and the Path Vector Limit is this value. Also, the value of the object, 'mplsLdpLsrLoopDetectionCapable', must be set to either 'pathVector(4)' or 'hopCountAndPathVector(5)', if this object has a value greater than 0 (zero), otherwise it is ignored." REFERENCE "RFC3036, LDP Specification, Section 2.8 Loop Dection, Section 3.4.5 Path Vector TLV." ::= { mplsLdpEntityEntry 14 }
mplsLdpEntityPathVectorLimit OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "If the value of this object is 0 (zero) then Loop Detection for Path Vectors is disabled. Otherwise, if this object has a value greater than zero, then Loop Dection for Path Vectors is enabled, and the Path Vector Limit is this value. Also, the value of the object, 'mplsLdpLsrLoopDetectionCapable', must be set to either 'pathVector(4)' or 'hopCountAndPathVector(5)', if this object has a value greater than 0 (zero), otherwise it is ignored." REFERENCE "RFC3036, LDP Specification, Section 2.8 Loop Dection, Section 3.4.5 Path Vector TLV." ::= { mplsLdpEntityEntry 14 }
Automatically extracted from RFC3815
mplsLdpEntityPathVectorLimit OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of this object is 0 (zero) then Loop Detection for Path Vectors is disabled. Otherwise, if this object has a value greater than zero, then Loop Dection for Path Vectors is enabled, and the Path Vector Limit is this value. Also, the value of the object, 'mplsLdpLsrLoopDetectionCapable', must be set to either 'pathVector(4)' or 'hopCountAndPathVector(5)', if this object has a value greater than 0 (zero), otherwise it is ignored." REFERENCE "RFC3036, LDP Specification, Section 2.8 Loop Dection, Section 3.4.5 Path Vector TLV." ::= { mplsLdpEntityEntry 14 }
mplsLdpEntityPathVectorLimit OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of this object is 0 (zero) then Loop Detection for Path Vectors is disabled. Otherwise, if this object has a value greater than zero, then Loop Dection for Path Vectors is enabled, and the Path Vector Limit is this value. Also, the value of the object, 'mplsLdpLsrLoopDetectionCapable', must be set to either 'pathVector(4)' or 'hopCountAndPathVector(5)', if this object has a value greater than 0 (zero), otherwise it is ignored." REFERENCE "RFC3036, LDP Specification, Section 2.8 Loop Dection, Section 3.4.5 Path Vector TLV." ::= { mplsLdpEntityEntry 14 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.4.1.2.3.1.1 | mplsLdpEntityLdpId | 0 | 0 | The LDP identifier. |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.2 | mplsLdpEntityIndex | 0 | 0 | This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'mplsLdpEntityIn… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.3 | mplsLdpEntityProtocolVersion | 0 | 0 | The version number of the LDP protocol which will be used in the session initialization message. Section 3.5.3 in the LDP Specifi… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.4 | mplsLdpEntityAdminStatus | 0 | 0 | The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already at… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.5 | mplsLdpEntityOperStatus | 0 | 0 | The operational status of this LDP Entity. The value of unknown(1) indicates that the operational status cannot be determined at t… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.6 | mplsLdpEntityTcpPort | 0 | 0 | The TCP Port for LDP. The default value is the well-known value of this port. |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.7 | mplsLdpEntityUdpDscPort | 0 | 0 | The UDP Discovery Port for LDP. The default value is the well-known value for this port. |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.8 | mplsLdpEntityMaxPduLength | 0 | 0 | The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. According to the LDP Specifica… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.9 | mplsLdpEntityKeepAliveHoldTimer | 0 | 0 | The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity. |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.10 | mplsLdpEntityHelloHoldTimer | 0 | 0 | The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR mainta… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.11 | mplsLdpEntityInitSessionThreshold | 0 | 0 | When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'mplsLdpInit… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.12 | mplsLdpEntityLabelDistMethod | 0 | 0 | For any given LDP session, the method of label distribution must be specified. |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.13 | mplsLdpEntityLabelRetentionMode | 0 | 0 | The LDP Entity can be configured to use either conservative or liberal label retention mode. If the value of this object is conse… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.15 | mplsLdpEntityHopCountLimit | 0 | 0 | If the value of this object is 0 (zero), then Loop Detection using Hop Counters is disabled. If the value of this object is greate… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.16 | mplsLdpEntityTransportAddrKind | 0 | 0 | This specifies whether the loopback or interface address is to be used as the transport address in the transport address TLV of t… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.17 | mplsLdpEntityTargetPeer | 0 | 0 | If this LDP entity uses targeted peer then set this to true. |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.18 | mplsLdpEntityTargetPeerAddrType | 0 | 0 | The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of mplsLdpEntity… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.19 | mplsLdpEntityTargetPeerAddr | 0 | 0 | The value of the internetwork layer address used for the Extended Discovery. The value of mplsLdpEntityTargetPeerAddrType specif… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.20 | mplsLdpEntityLabelType | 0 | 0 | Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters will … |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.21 | mplsLdpEntityDiscontinuityTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which any one or more of this entity's counters suffered a discontinuity. … |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.22 | mplsLdpEntityStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any colu… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.23 | mplsLdpEntityRowStatus | 0 | 0 | The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail… |