If this LDP entity uses targeted peer then set
this to true.
Parsed from file MPLS-LDP-STD-MIB.mib
Module: MPLS-LDP-STD-MIB
If this LDP entity uses targeted peer then set
this to true.
mplsLdpEntityTargetPeer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this LDP entity uses targeted peer then set
this to true."
DEFVAL { false }
View at oid-info.com
If this LDP entity uses targeted peer then set
this to true.
Parsed from file rfc3815-MPLS-Label-Distribution-Protocol-LDP.mib-1.txt
Company: None
Module: MPLS-LDP-STD-MIB
If this LDP entity uses targeted peer then set
this to true.
mplsLdpEntityTargetPeer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this LDP entity uses targeted peer then set this to true." DEFVAL { false } ::= { mplsLdpEntityEntry 17 }
mplsLdpEntityTargetPeer OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "If this LDP entity uses targeted peer then set this to true." DEFVAL { false } ::= { mplsLdpEntityEntry 17 }
Automatically extracted from RFC3815
mplsLdpEntityTargetPeer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this LDP entity uses targeted peer then set this to true." DEFVAL { false } ::= { mplsLdpEntityEntry 17 }
mplsLdpEntityTargetPeer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this LDP entity uses targeted peer then set this to true." DEFVAL { false } ::= { mplsLdpEntityEntry 17 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.4.1.2.3.1.1 | mplsLdpEntityLdpId | 0 | 0 | The LDP identifier. |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.2 | mplsLdpEntityIndex | 0 | 0 | This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'mplsLdpEntityIn… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.3 | mplsLdpEntityProtocolVersion | 0 | 0 | The version number of the LDP protocol which will be used in the session initialization message. Section 3.5.3 in the LDP Specifi… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.4 | mplsLdpEntityAdminStatus | 0 | 0 | The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already at… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.5 | mplsLdpEntityOperStatus | 0 | 0 | The operational status of this LDP Entity. The value of unknown(1) indicates that the operational status cannot be determined at t… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.6 | mplsLdpEntityTcpPort | 0 | 0 | The TCP Port for LDP. The default value is the well-known value of this port. |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.7 | mplsLdpEntityUdpDscPort | 0 | 0 | The UDP Discovery Port for LDP. The default value is the well-known value for this port. |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.8 | mplsLdpEntityMaxPduLength | 0 | 0 | The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. According to the LDP Specifica… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.9 | mplsLdpEntityKeepAliveHoldTimer | 0 | 0 | The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity. |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.10 | mplsLdpEntityHelloHoldTimer | 0 | 0 | The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR mainta… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.11 | mplsLdpEntityInitSessionThreshold | 0 | 0 | When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'mplsLdpInit… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.12 | mplsLdpEntityLabelDistMethod | 0 | 0 | For any given LDP session, the method of label distribution must be specified. |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.13 | mplsLdpEntityLabelRetentionMode | 0 | 0 | The LDP Entity can be configured to use either conservative or liberal label retention mode. If the value of this object is conse… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.14 | mplsLdpEntityPathVectorLimit | 0 | 0 | If the value of this object is 0 (zero) then Loop Detection for Path Vectors is disabled. Otherwise, if this object has a value g… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.15 | mplsLdpEntityHopCountLimit | 0 | 0 | If the value of this object is 0 (zero), then Loop Detection using Hop Counters is disabled. If the value of this object is greate… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.16 | mplsLdpEntityTransportAddrKind | 0 | 0 | This specifies whether the loopback or interface address is to be used as the transport address in the transport address TLV of t… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.18 | mplsLdpEntityTargetPeerAddrType | 0 | 0 | The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of mplsLdpEntity… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.19 | mplsLdpEntityTargetPeerAddr | 0 | 0 | The value of the internetwork layer address used for the Extended Discovery. The value of mplsLdpEntityTargetPeerAddrType specif… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.20 | mplsLdpEntityLabelType | 0 | 0 | Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters will … |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.21 | mplsLdpEntityDiscontinuityTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which any one or more of this entity's counters suffered a discontinuity. … |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.22 | mplsLdpEntityStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any colu… |
| 1.3.6.1.2.1.10.166.4.1.2.3.1.23 | mplsLdpEntityRowStatus | 0 | 0 | The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail… |