Reference record for OID 1.3.6.1.2.1.10.238.1.2.2.1.2



parent
1.3.6.1.2.1.10.238.1.2.2.1 (adsl2SCStatusEntry)
node code
2
node name
adsl2SCStatusMtime
dot oid
1.3.6.1.2.1.10.238.1.2.2.1.2
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) adsl2MIB(238) adsl2(1) adsl2Status(2) adsl2SCStatusTable(2) adsl2SCStatusEntry(1) adsl2SCStatusMtime(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) adsl2MIB(238) adsl2(1) adsl2Status(2) adsl2SCStatusTable(2) adsl2SCStatusEntry(1) adsl2SCStatusMtime(2)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) adsl2MIB(238) adsl2(1) adsl2Status(2) adsl2SCStatusTable(2) adsl2SCStatusEntry(1) adsl2SCStatusMtime(2)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) adsl2MIB(238) adsl2(1) adsl2Status(2) adsl2SCStatusTable(2) adsl2SCStatusEntry(1) adsl2SCStatusMtime(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) adsl2MIB(238) adsl2(1) adsl2Status(2) adsl2SCStatusTable(2) adsl2SCStatusEntry(1) adsl2SCStatusMtime(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) adsl2MIB(238) adsl2(1) adsl2Status(2) adsl2SCStatusTable(2) adsl2SCStatusEntry(1) adsl2SCStatusMtime(2)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/adsl2MIB/adsl2/adsl2Status/adsl2SCStatusTable/adsl2SCStatusEntry/adsl2SCStatusMtime
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/adsl2MIB/adsl2/adsl2Status/adsl2SCStatusTable/adsl2SCStatusEntry/adsl2SCStatusMtime
  • /iso/org/dod/internet/mgmt/mib-2/transmission/adsl2MIB/adsl2/adsl2Status/adsl2SCStatusTable/adsl2SCStatusEntry/adsl2SCStatusMtime
  • /iso/org/dod/internet/mgmt/mib/transmission/adsl2MIB/adsl2/adsl2Status/adsl2SCStatusTable/adsl2SCStatusEntry/adsl2SCStatusMtime
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/adsl2MIB/adsl2/adsl2Status/adsl2SCStatusTable/adsl2SCStatusEntry/adsl2SCStatusMtime
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/adsl2MIB/adsl2/adsl2Status/adsl2SCStatusTable/adsl2SCStatusEntry/adsl2SCStatusMtime
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/238/1/2/2/1/2

    Description by cisco_v1

    SNR Measurement Time. The number of symbols used to
    measure the SNR values on the respective transmission
    direction. It should correspond to the value specified in the
    recommendation (e.g., the number of symbols in 1 second
    time interval for G.992.3). This parameter corresponds to
    1 second in loop diagnostic procedure and should be updated
    otherwise.

    Description by oid_info

    adsl2SCStatusMtime OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS "symbols"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "SNR Measurement Time. The number of symbols used to
    measure the SNR values on the respective transmission
    direction. It should correspond to the value specified in the
    recommendation (e.g., the number of symbols in 1 second
    time interval for G.992.3). This parameter corresponds to
    1 second in loop diagnostic procedure and should be updated
    otherwise."
    REFERENCE "ITU-T G.997.1, paragraph 7.5.1.20.1 (SNRMTds)
    and paragraph 7.5.1.20.3 (SNRMTus)"
    View at oid-info.com

    Description by mibdepot

    SNR Measurement Time. The number of symbols used to
    measure the SNR values on the respective transmission
    direction. It should correspond to the value specified in the
    recommendation (e.g., the number of symbols in 1 second
    time interval for G.992.3). This parameter corresponds to
    1 second in loop diagnostic procedure and should be updated
    otherwise.

    Parsed from file rfc4706-ADSL2.mib-2.txt
    Company: None
    Module: ADSL2-LINE-MIB

    Description by cisco

    SNR Measurement Time. The number of symbols used to
    measure the SNR values on the respective transmission
    direction. It should correspond to the value specified in the
    recommendation (e.g., the number of symbols in 1 second
    time interval for G.992.3). This parameter corresponds to
    1 second in loop diagnostic procedure and should be updated
    otherwise.

    Information by cisco_v1

    adsl2SCStatusMtime OBJECT-TYPE
    SYNTAX Gauge


    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "SNR Measurement Time.  The number of symbols used to
        measure the SNR values on the respective transmission
        direction.  It should correspond to the value specified in the
        recommendation (e.g., the number of symbols in 1 second
        time interval for G.992.3).  This parameter corresponds to
        1 second in loop diagnostic procedure and should be updated
        otherwise."
    REFERENCE
        "ITU-T G.997.1, paragraph 7.5.1.20.1 (SNRMTds)
            and paragraph 7.5.1.20.3 (SNRMTus)"
    ::= { adsl2SCStatusEntry 2 }

    Information by oid_info

    Automatically extracted from RFC4706

    Information by mibdepot

    adsl2SCStatusMtime  OBJECT-TYPE
      SYNTAX      Unsigned32
      UNITS       "symbols"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "SNR Measurement Time.  The number of symbols used to
         measure the SNR values on the respective transmission
         direction.  It should correspond to the value specified in the
         recommendation (e.g., the number of symbols in 1 second
         time interval for G.992.3).  This parameter corresponds to
         1 second in loop diagnostic procedure and should be updated
         otherwise."
      REFERENCE    "ITU-T G.997.1, paragraph 7.5.1.20.1 (SNRMTds)
                    and paragraph 7.5.1.20.3 (SNRMTus)"
        ::= { adsl2SCStatusEntry 2 }

    Information by cisco

    adsl2SCStatusMtime OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "symbols"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "SNR Measurement Time.  The number of symbols used to
        measure the SNR values on the respective transmission
        direction.  It should correspond to the value specified in the
        recommendation (e.g., the number of symbols in 1 second
        time interval for G.992.3).  This parameter corresponds to
        1 second in loop diagnostic procedure and should be updated
        otherwise."
    REFERENCE
        "ITU-T G.997.1, paragraph 7.5.1.20.1 (SNRMTds)
            and paragraph 7.5.1.20.3 (SNRMTus)" 
    ::= { adsl2SCStatusEntry 2 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (18)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.238.1.2.2.1.1 adsl2SCStatusDirection 0 0 The direction of the sub-carrier is either
    upstream or downstream.
    1.3.6.1.2.1.10.238.1.2.2.1.3 adsl2SCStatusSnr 0 0 The SNR Margin per sub-carrier, expressing the ratio between
    the received signal power and received noise power per
    subscriber. …
    1.3.6.1.2.1.10.238.1.2.2.1.4 adsl2SCStatusBitsAlloc 0 0 The bits allocation per sub-carrier. An array of 256 octets
    (512 nibbles), designed for supporting up to 512 (downstream)
    sub-ca…
    1.3.6.1.2.1.10.238.1.2.2.1.5 adsl2SCStatusGainAlloc 0 0 The gain allocation per sub-carrier. An array of 512 16-bits
    values, designed for supporting up to 512 (downstream) sub-
    carrier…
    1.3.6.1.2.1.10.238.1.2.2.1.6 adsl2SCStatusTssi 0 0 The transmit spectrum shaping (TSSi) breakpoints expressed
    as the set of breakpoints exchanged during G.994.1.
    Each breakpoint is…
    1.3.6.1.2.1.10.238.1.2.2.1.7 adsl2SCStatusLinScale 0 0 The scale factor to be applied to the H(f) linear
    representation values for the respective transmission direction.
    This parameter…
    1.3.6.1.2.1.10.238.1.2.2.1.8 adsl2SCStatusLinReal 0 0 An array of up to 512 complex H(f) linear representation
    values in linear scale for the respective transmission
    direction. It is…
    1.3.6.1.2.1.10.238.1.2.2.1.9 adsl2SCStatusLinImg 0 0 An array of up to 512 complex H(f) linear representation
    values in linear scale for the respective transmission
    direction. It is…
    1.3.6.1.2.1.10.238.1.2.2.1.10 adsl2SCStatusLogMt 0 0 The number of symbols used to measure the H(f) logarithmic
    measurement values for the respective transmission direction.
    This par…
    1.3.6.1.2.1.10.238.1.2.2.1.11 adsl2SCStatusLog 0 0 An array of up to 512 real H(f) logarithmic representation
    values in dB for the respective transmission direction. It is
    designe…
    1.3.6.1.2.1.10.238.1.2.2.1.12 adsl2SCStatusQlnMt 0 0 The number of symbols used to measure the Quiet Line Noise
    values on the respective transmission direction. This
    parameter shoul…
    1.3.6.1.2.1.10.238.1.2.2.1.13 adsl2SCStatusQln 0 0 An array of up to 512 real Quiet Line Noise values in dBm/Hz
    for the respective transmission direction. It is designed for
    up to…
    1.3.6.1.2.1.10.238.1.2.2.1.14 adsl2SCStatusLnAtten 0 0 When referring to the downstream direction, it is the measured
    difference in the total power transmitted by the ATU-C and the
    tot…
    1.3.6.1.2.1.10.238.1.2.2.1.15 adsl2SCStatusSigAtten 0 0 When referring to the downstream direction, it is the measured
    difference in the total power transmitted by the
    ATU-C and the tot…
    1.3.6.1.2.1.10.238.1.2.2.1.16 adsl2SCStatusSnrMargin 0 0 SNR Margin is the maximum increase in dB of the noise power
    received at the ATU (ATU-R on downstream direction and ATU-C
    on upstr…
    1.3.6.1.2.1.10.238.1.2.2.1.17 adsl2SCStatusAttainableRate 0 0 Maximum Attainable Data Rate. The maximum net data rate
    currently attainable by the ATU-C transmitter and ATU-R
    receiver (when r…
    1.3.6.1.2.1.10.238.1.2.2.1.18 adsl2SCStatusActAtp 0 0 Actual Aggregate Transmit Power from the ATU (ATU-R on
    downstream direction and ATU-C on upstream direction), at the
    instant of m…
    1.3.6.1.2.1.10.238.1.2.2.1.19 adsl2SCStatusRowStatus 0 0 Row Status. The manager may create and delete rows
    of this table. Please see the description of
    adsl2SCStatusTable above for mo…