The bits allocation per sub-carrier. An array of 256 octets
(512 nibbles), designed for supporting up to 512 (downstream)
sub-carriers.
The number of utilized nibbles on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This
value is referred to here as NSC.
Nibble i (0 <= i < NSC) is set to a value in the range 0
to 15 to indicate that the respective downstream or upstream
sub-carrier i has the same amount of bits allocation.
adsl2SCStatusBitsAlloc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bits allocation per sub-carrier. An array of 256 octets
(512 nibbles), designed for supporting up to 512 (downstream)
sub-carriers.
The number of utilized nibbles on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This
value is referred to here as NSC.
Nibble i (0 <= i < NSC) is set to a value in the range 0
to 15 to indicate that the respective downstream or upstream
sub-carrier i has the same amount of bits allocation."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.1 (BITSpsds)
and paragraph 7.5.1.21.2 (BITSpsus)"
View at oid-info.com
The bits allocation per sub-carrier. An array of 256 octets
(512 nibbles), designed for supporting up to 512 (downstream)
sub-carriers.
The number of utilized nibbles on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This
value is referred to here as NSC.
Nibble i (0 <= i < NSC) is set to a value in the range 0
to 15 to indicate that the respective downstream or upstream
sub-carrier i has the same amount of bits allocation.
Parsed from file rfc4706-ADSL2.mib-2.txt
Company: None
Module: ADSL2-LINE-MIB
The bits allocation per sub-carrier. An array of 256 octets
(512 nibbles), designed for supporting up to 512 (downstream)
sub-carriers.
The number of utilized nibbles on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This
value is referred to here as NSC.
Nibble i (0 <= i < NSC) is set to a value in the range 0
to 15 to indicate that the respective downstream or upstream
sub-carrier i has the same amount of bits allocation.
adsl2SCStatusBitsAlloc OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. The number of utilized nibbles on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Nibble i (0 <= i < NSC) is set to a value in the range 0 to 15 to indicate that the respective downstream or upstream sub-carrier i has the same amount of bits allocation." REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.1 (BITSpsds) and paragraph 7.5.1.21.2 (BITSpsus)" ::= { adsl2SCStatusEntry 4 }
Automatically extracted from RFC4706
adsl2SCStatusBitsAlloc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. The number of utilized nibbles on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Nibble i (0 <= i < NSC) is set to a value in the range 0 to 15 to indicate that the respective downstream or upstream sub-carrier i has the same amount of bits allocation." REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.1 (BITSpsds) and paragraph 7.5.1.21.2 (BITSpsus)" ::= { adsl2SCStatusEntry 4 }
adsl2SCStatusBitsAlloc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. The number of utilized nibbles on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Nibble i (0 <= i < NSC) is set to a value in the range 0 to 15 to indicate that the respective downstream or upstream sub-carrier i has the same amount of bits allocation." REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.1 (BITSpsds) and paragraph 7.5.1.21.2 (BITSpsus)" ::= { adsl2SCStatusEntry 4 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.238.1.2.2.1.1 | adsl2SCStatusDirection | 0 | 0 | The direction of the sub-carrier is either upstream or downstream. |
| 1.3.6.1.2.1.10.238.1.2.2.1.2 | adsl2SCStatusMtime | 0 | 0 | SNR Measurement Time. The number of symbols used to measure the SNR values on the respective transmission direction. It should … |
| 1.3.6.1.2.1.10.238.1.2.2.1.3 | adsl2SCStatusSnr | 0 | 0 | The SNR Margin per sub-carrier, expressing the ratio between the received signal power and received noise power per subscriber. … |
| 1.3.6.1.2.1.10.238.1.2.2.1.5 | adsl2SCStatusGainAlloc | 0 | 0 | The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carrier… |
| 1.3.6.1.2.1.10.238.1.2.2.1.6 | adsl2SCStatusTssi | 0 | 0 | The transmit spectrum shaping (TSSi) breakpoints expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is… |
| 1.3.6.1.2.1.10.238.1.2.2.1.7 | adsl2SCStatusLinScale | 0 | 0 | The scale factor to be applied to the H(f) linear representation values for the respective transmission direction. This parameter… |
| 1.3.6.1.2.1.10.238.1.2.2.1.8 | adsl2SCStatusLinReal | 0 | 0 | An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is… |
| 1.3.6.1.2.1.10.238.1.2.2.1.9 | adsl2SCStatusLinImg | 0 | 0 | An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is… |
| 1.3.6.1.2.1.10.238.1.2.2.1.10 | adsl2SCStatusLogMt | 0 | 0 | The number of symbols used to measure the H(f) logarithmic measurement values for the respective transmission direction. This par… |
| 1.3.6.1.2.1.10.238.1.2.2.1.11 | adsl2SCStatusLog | 0 | 0 | An array of up to 512 real H(f) logarithmic representation values in dB for the respective transmission direction. It is designe… |
| 1.3.6.1.2.1.10.238.1.2.2.1.12 | adsl2SCStatusQlnMt | 0 | 0 | The number of symbols used to measure the Quiet Line Noise values on the respective transmission direction. This parameter shoul… |
| 1.3.6.1.2.1.10.238.1.2.2.1.13 | adsl2SCStatusQln | 0 | 0 | An array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to… |
| 1.3.6.1.2.1.10.238.1.2.2.1.14 | adsl2SCStatusLnAtten | 0 | 0 | When referring to the downstream direction, it is the measured difference in the total power transmitted by the ATU-C and the tot… |
| 1.3.6.1.2.1.10.238.1.2.2.1.15 | adsl2SCStatusSigAtten | 0 | 0 | When referring to the downstream direction, it is the measured difference in the total power transmitted by the ATU-C and the tot… |
| 1.3.6.1.2.1.10.238.1.2.2.1.16 | adsl2SCStatusSnrMargin | 0 | 0 | SNR Margin is the maximum increase in dB of the noise power received at the ATU (ATU-R on downstream direction and ATU-C on upstr… |
| 1.3.6.1.2.1.10.238.1.2.2.1.17 | adsl2SCStatusAttainableRate | 0 | 0 | Maximum Attainable Data Rate. The maximum net data rate currently attainable by the ATU-C transmitter and ATU-R receiver (when r… |
| 1.3.6.1.2.1.10.238.1.2.2.1.18 | adsl2SCStatusActAtp | 0 | 0 | Actual Aggregate Transmit Power from the ATU (ATU-R on downstream direction and ATU-C on upstream direction), at the instant of m… |
| 1.3.6.1.2.1.10.238.1.2.2.1.19 | adsl2SCStatusRowStatus | 0 | 0 | Row Status. The manager may create and delete rows of this table. Please see the description of adsl2SCStatusTable above for mo… |