Reference record for OID 1.3.6.1.2.1.10.48.1.10.1.15



parent
1.3.6.1.2.1.10.48.1.10.1 (hdsl2ShdslSpanConfProfileEntry)
node code
15
node name
hdsl2ShdslSpanConfLineProbeEnable
dot oid
1.3.6.1.2.1.10.48.1.10.1.15
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) hdsl2ShdslMIB(48) hdsl2ShdslMibObjects(1) hdsl2ShdslSpanConfProfileTable(10) hdsl2ShdslSpanConfProfileEntry(1) hdsl2ShdslSpanConfLineProbeEnable(15)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) hdsl2ShdslMIB(48) hdsl2ShdslMibObjects(1) hdsl2ShdslSpanConfProfileTable(10) hdsl2ShdslSpanConfProfileEntry(1) hdsl2ShdslSpanConfLineProbeEnable(15)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) hdsl2ShdslMIB(48) hdsl2ShdslMibObjects(1) hdsl2ShdslSpanConfProfileTable(10) hdsl2ShdslSpanConfProfileEntry(1) hdsl2ShdslSpanConfLineProbeEnable(15)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) hdsl2ShdslMIB(48) hdsl2ShdslMibObjects(1) hdsl2ShdslSpanConfProfileTable(10) hdsl2ShdslSpanConfProfileEntry(1) hdsl2ShdslSpanConfLineProbeEnable(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) hdsl2ShdslMIB(48) hdsl2ShdslMibObjects(1) hdsl2ShdslSpanConfProfileTable(10) hdsl2ShdslSpanConfProfileEntry(1) hdsl2ShdslSpanConfLineProbeEnable(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) hdsl2ShdslMIB(48) hdsl2ShdslMibObjects(1) hdsl2ShdslSpanConfProfileTable(10) hdsl2ShdslSpanConfProfileEntry(1) hdsl2ShdslSpanConfLineProbeEnable(15)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/hdsl2ShdslMIB/hdsl2ShdslMibObjects/hdsl2ShdslSpanConfProfileTable/hdsl2ShdslSpanConfProfileEntry/hdsl2ShdslSpanConfLineProbeEnable
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/hdsl2ShdslMIB/hdsl2ShdslMibObjects/hdsl2ShdslSpanConfProfileTable/hdsl2ShdslSpanConfProfileEntry/hdsl2ShdslSpanConfLineProbeEnable
  • /iso/org/dod/internet/mgmt/mib-2/transmission/hdsl2ShdslMIB/hdsl2ShdslMibObjects/hdsl2ShdslSpanConfProfileTable/hdsl2ShdslSpanConfProfileEntry/hdsl2ShdslSpanConfLineProbeEnable
  • /iso/org/dod/internet/mgmt/mib/transmission/hdsl2ShdslMIB/hdsl2ShdslMibObjects/hdsl2ShdslSpanConfProfileTable/hdsl2ShdslSpanConfProfileEntry/hdsl2ShdslSpanConfLineProbeEnable
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/hdsl2ShdslMIB/hdsl2ShdslMibObjects/hdsl2ShdslSpanConfProfileTable/hdsl2ShdslSpanConfProfileEntry/hdsl2ShdslSpanConfLineProbeEnable
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/hdsl2ShdslMIB/hdsl2ShdslMibObjects/hdsl2ShdslSpanConfProfileTable/hdsl2ShdslSpanConfProfileEntry/hdsl2ShdslSpanConfLineProbeEnable
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/48/1/10/1/15

    Description by circitor

    This object enables/disables support for Line Probe of
    the units in an SHDSL line. When Line Probe is enabled, the
    system performs Line Probing to find the best possible
    rate. If Line Probe is disabled, the rate adaptation phase
    is skipped to shorten set up time.

    Parsed from file HDSL2-SHDSL-LINE-MIB.mib
    Module: HDSL2-SHDSL-LINE-MIB

    Description by cisco_v1

    This object enables/disables support for Line Probe of
    the units in an SHDSL line. When Line Probe is enabled, the
    system performs Line Probing to find the best possible
    rate. If Line Probe is disabled, the rate adaptation phase
    is skipped to shorten set up time.

    Description by oid_info

    hdsl2ShdslSpanConfLineProbeEnable OBJECT-TYPE
    SYNTAX INTEGER
    {
    disable(1),
    enable(2)
    }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "This object enables/disables support for Line Probe of
    the units in a SHDSL line. When Line Probe is enabled, the
    system performs Line Probing to find the best possible
    rate. If Line probe is disabled, the rate adaptation phase
    is skipped to shorten set up time."
    DEFVAL { disable }
    View at oid-info.com

    Description by mibdepot

    This object enables/disables support for Line Probe of
    the units in an SHDSL line. When Line Probe is enabled, the
    system performs Line Probing to find the best possible
    rate. If Line Probe is disabled, the rate adaptation phase
    is skipped to shorten set up time.

    Parsed from file HDSL2-SHDSL-LINE-MIB-adslmib-10.txt
    Company: None
    Module: HDSL2-SHDSL-LINE-MIB

    Description by cisco

    This object enables/disables support for Line Probe of
    the units in an SHDSL line. When Line Probe is enabled, the
    system performs Line Probing to find the best possible
    rate. If Line Probe is disabled, the rate adaptation phase
    is skipped to shorten set up time.

    Information by circitor

    hdsl2ShdslSpanConfLineProbeEnable OBJECT-TYPE
   SYNTAX      INTEGER
               {
               disable(1),
               enable(2)
               }
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object enables/disables support for Line Probe of
      the units in an SHDSL line.  When Line Probe is enabled, the
      system performs Line Probing to find the best possible
      rate.  If Line Probe is disabled, the rate adaptation phase
      is skipped to shorten set up time."
   DEFVAL      { disable }
   ::= { hdsl2ShdslSpanConfProfileEntry 15 }

    Information by cisco_v1

    hdsl2ShdslSpanConfLineProbeEnable OBJECT-TYPE
    SYNTAX INTEGER {
        disable(1),
        enable(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object enables/disables support for Line Probe of
        the units in an SHDSL line.  When Line Probe is enabled, the
        system performs Line Probing to find the best possible
        rate.  If Line Probe is disabled, the rate adaptation phase
        is skipped to shorten set up time."
    DEFVAL { disable }
    ::= { hdsl2ShdslSpanConfProfileEntry 15 }

    Information by oid_info

    Automatically extracted from RFC3276

    Information by mibdepot

    hdsl2ShdslSpanConfLineProbeEnable OBJECT-TYPE
    SYNTAX          INTEGER  {
                        disable(1),
                        enable(2)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object enables/disables support for Line Probe of
        the units in an SHDSL line.  When Line Probe is enabled, the
        system performs Line Probing to find the best possible
        rate.  If Line Probe is disabled, the rate adaptation phase
        is skipped to shorten set up time."
    DEFVAL          { disable } 
    ::= { hdsl2ShdslSpanConfProfileEntry 15 }

    Information by cisco

    hdsl2ShdslSpanConfLineProbeEnable OBJECT-TYPE
    SYNTAX          INTEGER  {
                        disable(1),
                        enable(2)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object enables/disables support for Line Probe of
        the units in an SHDSL line.  When Line Probe is enabled, the
        system performs Line Probing to find the best possible
        rate.  If Line Probe is disabled, the rate adaptation phase
        is skipped to shorten set up time."
    DEFVAL          { disable } 
    ::= { hdsl2ShdslSpanConfProfileEntry 15 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (15)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.48.1.10.1.1 hdsl2ShdslSpanConfProfileName 0 0 This object is the unique index associated with this profile.
    Entries in this table are referenced via the object
    hdsl2ShdslSpanC…
    1.3.6.1.2.1.10.48.1.10.1.2 hdsl2ShdslSpanConfWireInterface 0 0 This object configures the two-wire or optional four-wire
    operation for SHDSL Lines.
    1.3.6.1.2.1.10.48.1.10.1.3 hdsl2ShdslSpanConfMinLineRate 0 0 This object configures the minimum transmission rate for
    the associated SHDSL Line in bits-per-second (bps). If
    the minimum line…
    1.3.6.1.2.1.10.48.1.10.1.4 hdsl2ShdslSpanConfMaxLineRate 0 0 This object configures the maximum transmission rate for
    the associated SHDSL Line in bits-per-second (bps). If
    the minimum line…
    1.3.6.1.2.1.10.48.1.10.1.5 hdsl2ShdslSpanConfPSD 0 0 This object configures use of symmetric/asymmetric PSD (Power
    Spectral Density) Mask for the associated SHDSL Line. Support
    for …
    1.3.6.1.2.1.10.48.1.10.1.6 hdsl2ShdslSpanConfTransmissionMode 0 0 This object specifies the regional setting for the SHDSL
    line.
    1.3.6.1.2.1.10.48.1.10.1.7 hdsl2ShdslSpanConfRemoteEnabled 0 0 This object enables/disables support for remote management
    of the units in a SHDSL line from the STU-R via the EOC.
    1.3.6.1.2.1.10.48.1.10.1.8 hdsl2ShdslSpanConfPowerFeeding 0 0 This object enables/disables support for optional power
    feeding in a SHDSL line.
    1.3.6.1.2.1.10.48.1.10.1.9 hdsl2ShdslSpanConfCurrCondTargetMarginDown 0 0 This object specifies the downstream current condition target
    SNR margin for a SHDSL line. The SNR margin is the difference
    betw…
    1.3.6.1.2.1.10.48.1.10.1.10 hdsl2ShdslSpanConfWorstCaseTargetMarginDown 0 0 This object specifies the downstream worst case target SNR
    margin for a SHDSL line. The SNR margin is the difference
    between the…
    1.3.6.1.2.1.10.48.1.10.1.11 hdsl2ShdslSpanConfCurrCondTargetMarginUp 0 0 This object specifies the upstream current condition target
    SNR margin for a SHDSL line. The SNR margin is the difference
    betwee…
    1.3.6.1.2.1.10.48.1.10.1.12 hdsl2ShdslSpanConfWorstCaseTargetMarginUp 0 0 This object specifies the upstream worst case target SNR
    margin for a SHDSL line. The SNR margin is the difference
    between the d…
    1.3.6.1.2.1.10.48.1.10.1.13 hdsl2ShdslSpanConfUsedTargetMargins 0 0 Contains indicates whether a target SNR margin is enabled or
    disabled. This is a bit-map of possible settings. The
    various bit …
    1.3.6.1.2.1.10.48.1.10.1.14 hdsl2ShdslSpanConfReferenceClock 0 0 This object configures the clock reference for the STU-C
    in an SHDSL Line.
    1.3.6.1.2.1.10.48.1.10.1.16 hdsl2ShdslSpanConfProfileRowStatus 0 0 This object controls creation/deletion of the associated
    entry in this table per the semantics of RowStatus. If an
    active entry …