This object controls creation/deletion of the associated
entry in this table per the semantics of RowStatus. If an
active entry is referenced in hdsl2ShdslSpanConfProfile, the
entry MUST remain active until all references are removed.
Parsed from file HDSL2-SHDSL-LINE-MIB.mib
Module: HDSL2-SHDSL-LINE-MIB
This object controls creation/deletion of the associated
entry in this table per the semantics of RowStatus. If an
active entry is referenced in hdsl2ShdslSpanConfProfile, the
entry MUST remain active until all references are removed.
hdsl2ShdslSpanConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls creation/deletion of the associated
entry in this table per the semantics of RowStatus. If an
active entry is referenced in hdsl2ShdslSpanConfProfile, the
entry MUST remain active until all references are removed."
View at oid-info.com
This object controls creation/deletion of the associated
entry in this table per the semantics of RowStatus. If an
active entry is referenced in hdsl2ShdslSpanConfProfile, the
entry MUST remain active until all references are removed.
Parsed from file HDSL2-SHDSL-LINE-MIB-adslmib-10.txt
Company: None
Module: HDSL2-SHDSL-LINE-MIB
This object controls creation/deletion of the associated
entry in this table per the semantics of RowStatus. If an
active entry is referenced in hdsl2ShdslSpanConfProfile, the
entry MUST remain active until all references are removed.
hdsl2ShdslSpanConfProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object controls creation/deletion of the associated entry in this table per the semantics of RowStatus. If an active entry is referenced in hdsl2ShdslSpanConfProfile, the entry MUST remain active until all references are removed." ::= { hdsl2ShdslSpanConfProfileEntry 16 }
hdsl2ShdslSpanConfProfileRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This object controls creation/deletion of the associated entry in this table per the semantics of RowStatus. If an active entry is referenced in hdsl2ShdslSpanConfProfile, the entry MUST remain active until all references are removed." ::= { hdsl2ShdslSpanConfProfileEntry 16 }
Automatically extracted from RFC3276
hdsl2ShdslSpanConfProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object controls creation/deletion of the associated entry in this table per the semantics of RowStatus. If an active entry is referenced in hdsl2ShdslSpanConfProfile, the entry MUST remain active until all references are removed." ::= { hdsl2ShdslSpanConfProfileEntry 16 }
hdsl2ShdslSpanConfProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object controls creation/deletion of the associated entry in this table per the semantics of RowStatus. If an active entry is referenced in hdsl2ShdslSpanConfProfile, the entry MUST remain active until all references are removed." ::= { hdsl2ShdslSpanConfProfileEntry 16 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.48.1.10.1.1 | hdsl2ShdslSpanConfProfileName | 0 | 0 | This object is the unique index associated with this profile. Entries in this table are referenced via the object hdsl2ShdslSpanC… |
| 1.3.6.1.2.1.10.48.1.10.1.2 | hdsl2ShdslSpanConfWireInterface | 0 | 0 | This object configures the two-wire or optional four-wire operation for SHDSL Lines. |
| 1.3.6.1.2.1.10.48.1.10.1.3 | hdsl2ShdslSpanConfMinLineRate | 0 | 0 | This object configures the minimum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line… |
| 1.3.6.1.2.1.10.48.1.10.1.4 | hdsl2ShdslSpanConfMaxLineRate | 0 | 0 | This object configures the maximum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line… |
| 1.3.6.1.2.1.10.48.1.10.1.5 | hdsl2ShdslSpanConfPSD | 0 | 0 | This object configures use of symmetric/asymmetric PSD (Power Spectral Density) Mask for the associated SHDSL Line. Support for … |
| 1.3.6.1.2.1.10.48.1.10.1.6 | hdsl2ShdslSpanConfTransmissionMode | 0 | 0 | This object specifies the regional setting for the SHDSL line. |
| 1.3.6.1.2.1.10.48.1.10.1.7 | hdsl2ShdslSpanConfRemoteEnabled | 0 | 0 | This object enables/disables support for remote management of the units in a SHDSL line from the STU-R via the EOC. |
| 1.3.6.1.2.1.10.48.1.10.1.8 | hdsl2ShdslSpanConfPowerFeeding | 0 | 0 | This object enables/disables support for optional power feeding in a SHDSL line. |
| 1.3.6.1.2.1.10.48.1.10.1.9 | hdsl2ShdslSpanConfCurrCondTargetMarginDown | 0 | 0 | This object specifies the downstream current condition target SNR margin for a SHDSL line. The SNR margin is the difference betw… |
| 1.3.6.1.2.1.10.48.1.10.1.10 | hdsl2ShdslSpanConfWorstCaseTargetMarginDown | 0 | 0 | This object specifies the downstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the… |
| 1.3.6.1.2.1.10.48.1.10.1.11 | hdsl2ShdslSpanConfCurrCondTargetMarginUp | 0 | 0 | This object specifies the upstream current condition target SNR margin for a SHDSL line. The SNR margin is the difference betwee… |
| 1.3.6.1.2.1.10.48.1.10.1.12 | hdsl2ShdslSpanConfWorstCaseTargetMarginUp | 0 | 0 | This object specifies the upstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the d… |
| 1.3.6.1.2.1.10.48.1.10.1.13 | hdsl2ShdslSpanConfUsedTargetMargins | 0 | 0 | Contains indicates whether a target SNR margin is enabled or disabled. This is a bit-map of possible settings. The various bit … |
| 1.3.6.1.2.1.10.48.1.10.1.14 | hdsl2ShdslSpanConfReferenceClock | 0 | 0 | This object configures the clock reference for the STU-C in an SHDSL Line. |
| 1.3.6.1.2.1.10.48.1.10.1.15 | hdsl2ShdslSpanConfLineProbeEnable | 0 | 0 | This object enables/disables support for Line Probe of the units in an SHDSL line. When Line Probe is enabled, the system perfor… |