The vendor ID code is a copy of the binary
vendor identification field defined by the
PHY[10] and expressed as readable characters.
Parsed from file ADSL-LINE-MIB.mib
Module: ADSL-LINE-MIB
The vendor ID assigned by T1E1.413 according to its
Annex D.[10]
SYNTAX SnmpAdminString (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor ID code is a copy of the binary
vendor identification field defined by the
PHY[10] and expressed as readable characters."
REFERENCE "ANSI T1.413[10]"
View at oid-info.com
The vendor ID code is a copy of the binary
vendor identification field defined by the
PHY[10] and expressed as readable characters.
Parsed from file adsl-line.mib.txt
Company: None
Module: ADSL-LINE-MIB
The vendor ID assigned by T1E1.413 according to its
Annex D.[10]
adslAtucInvVendorID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters." REFERENCE "ANSI T1.413[10]" ::= { adslAtucPhysEntry 2 }
adslAtucInvVendorID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The vendor ID assigned by T1E1.413 according to its Annex D.[10]" ::= { adslAtucPhysEntry 2 }
Defined in RFC2662
adslAtucInvVendorID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters." REFERENCE "ANSI T1.413[10]" ::= { adslAtucPhysEntry 2 }
adslAtucInvVendorID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor ID assigned by T1E1.413 according to its Annex D.[10]" ::= { adslAtucPhysEntry 2 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.94.1.1.2.1.1 | adslAtucInvSerialNumber | 0 | 0 | Vendor specific string that identifies the vendor equipment. |
| 1.3.6.1.2.1.10.94.1.1.2.1.3 | adslAtucInvVersionNumber | 0 | 0 | Vendor specific version number sent by this ATU as part of the initialization messages. |
| 1.3.6.1.2.1.10.94.1.1.2.1.4 | adslAtucCurrSnrMgn | 0 | 0 | Noise Margin as seen by this ATU with respect to its received signal in tenth dB. |
| 1.3.6.1.2.1.10.94.1.1.2.1.5 | adslAtucCurrAtn | 0 | 0 | Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. |
| 1.3.6.1.2.1.10.94.1.1.2.1.6 | adslAtucCurrStatus | 0 | 0 | Indicates current state of the ATUC line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefe… |
| 1.3.6.1.2.1.10.94.1.1.2.1.7 | adslAtucCurrOutputPwr | 0 | 0 | Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequenc… |
| 1.3.6.1.2.1.10.94.1.1.2.1.8 | adslAtucCurrAttainableRate | 0 | 0 | Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. |