alarmModelVarbindIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index into the varbind listing of the notification
indicated by alarmModelNotificationId which helps
signal that the given alarm has changed state.
If there is no applicable varbind, the value of this
object MUST be zero.
Note that the value of alarmModelVarbindIndex acknowledges
the existence of the first two obligatory varbinds in
the InformRequest-PDU and SNMPv2-Trap-PDU (sysUpTime.0
and snmpTrapOID.0). That is, a value of 2 refers to
the snmpTrapOID.0.
If the incoming notification is instead an SNMPv1 Trap-PDU,
then an appropriate value for sysUpTime.0 or snmpTrapOID.0
shall be determined by using the rules in section 3.1 of
[RFC3584]"
DEFVAL { 0 }
View at oid-info.com
The index into the varbind listing of the notification
indicated by alarmModelNotificationId which helps
signal that the given alarm has changed state.
If there is no applicable varbind, the value of this
object MUST be zero.
Note that the value of alarmModelVarbindIndex acknowledges
the existence of the first two obligatory varbinds in
the InformRequest-PDU and SNMPv2-Trap-PDU (sysUpTime.0
and snmpTrapOID.0). That is, a value of 2 refers to
the snmpTrapOID.0.
If the incoming notification is instead an SNMPv1 Trap-PDU,
then an appropriate value for sysUpTime.0 or snmpTrapOID.0
shall be determined by using the rules in section 3.1 of
[RFC3584]
Parsed from file Alarm.mib.txt
Company: None
Module: ALARM-MIB
The index into the varbind listing of the notification
indicated by alarmModelNotificationId which helps
signal that the given alarm has changed state.
If there is no applicable varbind, the value of this
object MUST be zero.
Note that the value of alarmModelVarbindIndex acknowledges
the existence of the first two obligatory varbinds in
the InformRequest-PDU and SNMPv2-Trap-PDU (sysUpTime.0
and snmpTrapOID.0). That is, a value of 2 refers to
the snmpTrapOID.0.
If the incoming notification is instead an SNMPv1 Trap-PDU,
then an appropriate value for sysUpTime.0 or snmpTrapOID.0
shall be determined by using the rules in section 3.1 of
[RFC3584]
Parsed from file ALARM-MIB.mib
Module: ALARM-MIB
Automatically extracted from RFC3877
alarmModelVarbindIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index into the varbind listing of the notification indicated by alarmModelNotificationId which helps signal that the given alarm has changed state. If there is no applicable varbind, the value of this object MUST be zero. Note that the value of alarmModelVarbindIndex acknowledges the existence of the first two obligatory varbinds in the InformRequest-PDU and SNMPv2-Trap-PDU (sysUpTime.0 and snmpTrapOID.0). That is, a value of 2 refers to the snmpTrapOID.0. If the incoming notification is instead an SNMPv1 Trap-PDU, then an appropriate value for sysUpTime.0 or snmpTrapOID.0 shall be determined by using the rules in section 3.1 of [RFC3584]" DEFVAL { 0 } ::= { alarmModelEntry 4 }
alarmModelVarbindIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index into the varbind listing of the notification indicated by alarmModelNotificationId which helps signal that the given alarm has changed state. If there is no applicable varbind, the value of this object MUST be zero. Note that the value of alarmModelVarbindIndex acknowledges the existence of the first two obligatory varbinds in the InformRequest-PDU and SNMPv2-Trap-PDU (sysUpTime.0 and snmpTrapOID.0). That is, a value of 2 refers to the snmpTrapOID.0. If the incoming notification is instead an SNMPv1 Trap-PDU, then an appropriate value for sysUpTime.0 or snmpTrapOID.0 shall be determined by using the rules in section 3.1 of [RFC3584]" DEFVAL { 0 } ::= { alarmModelEntry 4 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.118.1.1.2.1.1 | alarmModelIndex | 0 | 0 | An integer that acts as an alarm Id to uniquely identify each alarm within the named alarm list. |
| 1.3.6.1.2.1.118.1.1.2.1.2 | alarmModelState | 0 | 0 | A value of 1 MUST indicate a clear alarm state. The value of this object MUST be less than the alarmModelState of more severe ala… |
| 1.3.6.1.2.1.118.1.1.2.1.3 | alarmModelNotificationId | 0 | 0 | The NOTIFICATION-TYPE object identifier of this alarm state transition. If there is no notification associated with this alarm s… |
| 1.3.6.1.2.1.118.1.1.2.1.5 | alarmModelVarbindValue | 0 | 0 | The value that the varbind indicated by alarmModelVarbindIndex takes to indicate that the alarm has entered this state. If alarmMo… |
| 1.3.6.1.2.1.118.1.1.2.1.6 | alarmModelDescription | 0 | 0 | A brief description of this alarm and state suitable to display to operators. |
| 1.3.6.1.2.1.118.1.1.2.1.7 | alarmModelSpecificPointer | 0 | 0 | If no additional, model-specific Alarm MIB is supported by the system the value of this object is `0.0'and attempts to set it to … |
| 1.3.6.1.2.1.118.1.1.2.1.8 | alarmModelVarbindSubtree, alarmModelRowStatus | 0 | 0 | Control for creating and deleting entries. Entries may be modified while active. This row can not be deleted while it is being r… |
| 1.3.6.1.2.1.118.1.1.2.1.9 | alarmModelResourcePrefix | 0 | 0 | The value of AlarmActiveResourceId is computed by appending any indexes extracted in accordance with the description of alarmMode… |
| 1.3.6.1.2.1.118.1.1.2.1.10 | alarmModelRowStatus | 0 | 0 | Control for creating and deleting entries. Entries may be modified while active. Alarms whose alarmModelRowStatus is not active… |