Bit mask that specifies the driver level
protocol(s) that are currently operational.
If this is not applicable, return all bits
set to zero. This object has the same
definition as fcConnUnitPortProtocolCap
Parsed from file fcmgmt_efcm.mib.txt
Company: emc
Module: mcdata_31
fcConnUnitPortProtocolOp OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bit mask that specifies the driver level protocol(s) that are currently operational. If this is not applicable, return all bits set to zero. This object has the same definition as fcConnUnitPortProtocolCap" ::= { fcConnUnitPortEntry 19 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.8888.1.1.6.1.1 | fcConnUnitPortIndex | 0 | 0 | A unique value among all fcConnUnitPortEntrys on this connectivity unit, between 1 and fcConnUnitNumPorts. |
| 1.3.6.1.2.1.8888.1.1.6.1.2 | fcConnUnitPortType | 0 | 0 | The port type refers to the protocol active on the port and can take one of the following values: unknown (1) - cannot be dete… |
| 1.3.6.1.2.1.8888.1.1.6.1.3 | fcConnUnitPortFCClassCap | 0 | 0 | Bit mask that specifies the classes of service capability of this port. If this object is not applicable, the agent MUST return a… |
| 1.3.6.1.2.1.8888.1.1.6.1.4 | fcConnUnitPortFCClassOp | 0 | 0 | Bit mask that specifies the classes of service that are currently operational at this port. If this object is not applicable, th… |
| 1.3.6.1.2.1.8888.1.1.6.1.5 | fcConnUnitPortState | 0 | 0 | The current state of the port hardware. The bypassed value (4) means that the port is online but is currently being isolated fro… |
| 1.3.6.1.2.1.8888.1.1.6.1.6 | fcConnUnitPortStatus | 0 | 0 | The current overall protocol status for the port. The warning value (4) means that the port needs attention; the notParticipatin… |
| 1.3.6.1.2.1.8888.1.1.6.1.7 | fcConnUnitPortTransmitterType | 0 | 0 | The technology of the port transceiver. |
| 1.3.6.1.2.1.8888.1.1.6.1.8 | fcConnUnitPortModuleType | 0 | 0 | The module type of the port connector. This object refers to the hardware implementation of the port. The embedded value (4) mea… |
| 1.3.6.1.2.1.8888.1.1.6.1.9 | fcConnUnitPortWwn | 0 | 0 | The World Wide Name of the port if applicable, otherwise empty string. |
| 1.3.6.1.2.1.8888.1.1.6.1.10 | fcConnUnitPortFCId | 0 | 0 | This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits. If this is loop,… |
| 1.3.6.1.2.1.8888.1.1.6.1.11 | fcConnUnitPortSerialNo | 0 | 0 | The serial number identification of the unit (e.g., for a GBIC). If this is not applicable, return a zero-length string. |
| 1.3.6.1.2.1.8888.1.1.6.1.12 | fcConnUnitPortRevision | 0 | 0 | The port revision (e.g., for a GBIC). |
| 1.3.6.1.2.1.8888.1.1.6.1.13 | fcConnUnitPortVendor | 0 | 0 | The port vendor (e.g., for a GBIC). |
| 1.3.6.1.2.1.8888.1.1.6.1.14 | fcConnUnitPortSpeed | 0 | 0 | The speed of the port in kilobytes per second. |
| 1.3.6.1.2.1.8888.1.1.6.1.15 | fcConnUnitPortControl | 0 | 0 | This object is used to control the addressed fcConnUnit's port. Valid commands are: unknown and invalid are only used as values t… |
| 1.3.6.1.2.1.8888.1.1.6.1.16 | fcConnUnitPortName | 0 | 0 | A string describing the addressed port. |
| 1.3.6.1.2.1.8888.1.1.6.1.17 | fcConnUnitPortPhysicalNumber | 0 | 0 | This is the internal port number this port is known by. In many implementations, this should be the same as fcConnUnitPortIndex. … |
| 1.3.6.1.2.1.8888.1.1.6.1.18 | fcConnUnitPortProtocolCap | 0 | 0 | Bit mask that specifies the driver level protocol capability of this port. If this is not applicable, return all bits set to zero… |
| 1.3.6.1.2.1.8888.1.1.6.1.20 | fcConnUnitPortNodeWwn | 0 | 0 | The Node World Wide Name of the port if applicable, otherwise all zeros. This should have the same value for a group of related po… |
| 1.3.6.1.2.1.8888.1.1.6.1.21 | fcConnUnitPortHWState | 0 | 0 | The hardware detected state of the port. |