The current overall protocol status for the port. The
warning value (4) means that the port needs attention;
the notParticipating value (6) means that protocol is not
being processed; the initializing value (7) means that the
port is in the process of coming into service; the bypassed
value (8) means that the port has been manually or
automatically isolated from the loop or fabric; the other
values are essentially self-explanatory. Any value for this
object may co-exist with any value for the fcConnUnitPortState
object.
Parsed from file fcmgmt_efcm.mib.txt
Company: emc
Module: mcdata_31
fcConnUnitPortStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), unused (2), ok (3), warning (4), failure (5), notParticipating (6), initializing (7), bypassed (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current overall protocol status for the port. The warning value (4) means that the port needs attention; the notParticipating value (6) means that protocol is not being processed; the initializing value (7) means that the port is in the process of coming into service; the bypassed value (8) means that the port has been manually or automatically isolated from the loop or fabric; the other values are essentially self-explanatory. Any value for this object may co-exist with any value for the fcConnUnitPortState object." ::= { fcConnUnitPortEntry 6 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.8888.1.1.6.1.1 | fcConnUnitPortIndex | 0 | 0 | A unique value among all fcConnUnitPortEntrys on this connectivity unit, between 1 and fcConnUnitNumPorts. |
| 1.3.6.1.2.1.8888.1.1.6.1.2 | fcConnUnitPortType | 0 | 0 | The port type refers to the protocol active on the port and can take one of the following values: unknown (1) - cannot be dete… |
| 1.3.6.1.2.1.8888.1.1.6.1.3 | fcConnUnitPortFCClassCap | 0 | 0 | Bit mask that specifies the classes of service capability of this port. If this object is not applicable, the agent MUST return a… |
| 1.3.6.1.2.1.8888.1.1.6.1.4 | fcConnUnitPortFCClassOp | 0 | 0 | Bit mask that specifies the classes of service that are currently operational at this port. If this object is not applicable, th… |
| 1.3.6.1.2.1.8888.1.1.6.1.5 | fcConnUnitPortState | 0 | 0 | The current state of the port hardware. The bypassed value (4) means that the port is online but is currently being isolated fro… |
| 1.3.6.1.2.1.8888.1.1.6.1.7 | fcConnUnitPortTransmitterType | 0 | 0 | The technology of the port transceiver. |
| 1.3.6.1.2.1.8888.1.1.6.1.8 | fcConnUnitPortModuleType | 0 | 0 | The module type of the port connector. This object refers to the hardware implementation of the port. The embedded value (4) mea… |
| 1.3.6.1.2.1.8888.1.1.6.1.9 | fcConnUnitPortWwn | 0 | 0 | The World Wide Name of the port if applicable, otherwise empty string. |
| 1.3.6.1.2.1.8888.1.1.6.1.10 | fcConnUnitPortFCId | 0 | 0 | This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits. If this is loop,… |
| 1.3.6.1.2.1.8888.1.1.6.1.11 | fcConnUnitPortSerialNo | 0 | 0 | The serial number identification of the unit (e.g., for a GBIC). If this is not applicable, return a zero-length string. |
| 1.3.6.1.2.1.8888.1.1.6.1.12 | fcConnUnitPortRevision | 0 | 0 | The port revision (e.g., for a GBIC). |
| 1.3.6.1.2.1.8888.1.1.6.1.13 | fcConnUnitPortVendor | 0 | 0 | The port vendor (e.g., for a GBIC). |
| 1.3.6.1.2.1.8888.1.1.6.1.14 | fcConnUnitPortSpeed | 0 | 0 | The speed of the port in kilobytes per second. |
| 1.3.6.1.2.1.8888.1.1.6.1.15 | fcConnUnitPortControl | 0 | 0 | This object is used to control the addressed fcConnUnit's port. Valid commands are: unknown and invalid are only used as values t… |
| 1.3.6.1.2.1.8888.1.1.6.1.16 | fcConnUnitPortName | 0 | 0 | A string describing the addressed port. |
| 1.3.6.1.2.1.8888.1.1.6.1.17 | fcConnUnitPortPhysicalNumber | 0 | 0 | This is the internal port number this port is known by. In many implementations, this should be the same as fcConnUnitPortIndex. … |
| 1.3.6.1.2.1.8888.1.1.6.1.18 | fcConnUnitPortProtocolCap | 0 | 0 | Bit mask that specifies the driver level protocol capability of this port. If this is not applicable, return all bits set to zero… |
| 1.3.6.1.2.1.8888.1.1.6.1.19 | fcConnUnitPortProtocolOp | 0 | 0 | Bit mask that specifies the driver level protocol(s) that are currently operational. If this is not applicable, return all bits se… |
| 1.3.6.1.2.1.8888.1.1.6.1.20 | fcConnUnitPortNodeWwn | 0 | 0 | The Node World Wide Name of the port if applicable, otherwise all zeros. This should have the same value for a group of related po… |
| 1.3.6.1.2.1.8888.1.1.6.1.21 | fcConnUnitPortHWState | 0 | 0 | The hardware detected state of the port. |