This variable causes the MAC sublayer to enter the normal
operational state at idle. The PLS is reset by this operation.
It is accomplished by setting receiveEnabled and
transmitEnabled to true. Setting this variable to enabled(1)
enables the MAC sublayer to both receive and transmit frames.
Setting this variable to enabled(1) will also set the
ieee8023TransmitStatus variable to enabled(1). Similarly,
setting this variable to disabled(2) will also set
ieee8023TransmitStatus to disabled(2). Modifying this variable
does not change the state of any other variables. If the
variable is set to disabled(2), then any current
transmission/reception is completed before the
transmission/reception process is disabled. The value
returned when this variable is read is the logical and of the
receiveEnabled and transmitEnabled MAC internal state
variables. If both are in the enabled state, then enabled(1)
is returned; otherwise disabled(2) is returned.
Parsed from file SYNOPTICS-IEEE8023-MIB.mib
Module: SYNOPTICS-IEEE8023-MIB
ieee8023MacSubLayerStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable causes the MAC sublayer to enter the normal operational state at idle. The PLS is reset by this operation. It is accomplished by setting receiveEnabled and transmitEnabled to true. Setting this variable to enabled(1) enables the MAC sublayer to both receive and transmit frames. Setting this variable to enabled(1) will also set the ieee8023TransmitStatus variable to enabled(1). Similarly, setting this variable to disabled(2) will also set ieee8023TransmitStatus to disabled(2). Modifying this variable does not change the state of any other variables. If the variable is set to disabled(2), then any current transmission/reception is completed before the transmission/reception process is disabled. The value returned when this variable is read is the logical and of the receiveEnabled and transmitEnabled MAC internal state variables. If both are in the enabled state, then enabled(1) is returned; otherwise disabled(2) is returned." ::= { ieee8023IfEntry 26 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.3.3.1.1.1 | dot3Index, ieee8023IfIndex | 0 | 0 | The value assigned to the INX-NTS Ethernet interface. Because the INX-NTS has only one interface, this variable always returns 1. |
| 1.3.6.1.3.3.1.1.2 | dot3InitializeMAC, ieee8023FrmsTxOk | 0 | 0 | The initialization status of the MAC and PLS subsystems of the interface. Because the MAC and PLS subsystems on the INX-NTS are… |
| 1.3.6.1.3.3.1.1.3 | dot3MACSubLayerStatus, ieee8023SingleCollFrms | 0 | 0 | The operational status of the MAC sublayer, i.e., whether it is ready to transmit and receive frames. Because this sublayer is a… |
| 1.3.6.1.3.3.1.1.4 | dot3MulticastReceiveEnabled, ieee8023MultipleCollFrms | 0 | 0 | The Multicast Receive status, i.e., whether the INX-NTS is configured to receive frames with a multicast address. Because Multi… |
| 1.3.6.1.3.3.1.1.5 | dot3AlignmentErrors, ieee8023OctetsTxOk | 0 | 0 | The number of frames received on the interface that are not an integral number of octets in length (i.e., the number of bits the… |
| 1.3.6.1.3.3.1.1.6 | dot3FCSErrors, ieee8023DefTx | 0 | 0 | The number of frames received on the interface that are an integral number of octets in length (i.e., the number of bits they co… |
| 1.3.6.1.3.3.1.1.7 | ieee8023McastFrmsTxOk | 0 | 0 | The number of frames successfully transmitted to a multicast address. This counter does not include frames sent to the broadcast … |
| 1.3.6.1.3.3.1.1.8 | ieee8023BcastFrmsTxOk | 0 | 0 | The number of frames successfully transmitted to the broadcast address. This counter does not include frames sent to a multicast … |
| 1.3.6.1.3.3.1.1.9 | ieee8023LateColls | 0 | 0 | The number of times that a collision has been detected later than 512 bit times into the transmission of a packet. 512 bit times … |
| 1.3.6.1.3.3.1.1.10 | ieee8023ExcessColls | 0 | 0 | The number of frames that are not transmitted because of excessive collisions. |
| 1.3.6.1.3.3.1.1.11 | ieee8023IntlMacTxError | 0 | 0 | The number of frames that would otherwise be transmitted by the station, but could not be sent because of an internal MAC sublaye… |
| 1.3.6.1.3.3.1.1.12 | ieee8023CsErrors | 0 | 0 | The number of times that carrier sense was lost or never appeared when attempting to transmit a packet. This counter is increment… |
| 1.3.6.1.3.3.1.1.13 | ieee8023ExcessDef | 0 | 0 | The number of frames that deferred for an excessive period of time. |
| 1.3.6.1.3.3.1.1.14 | ieee8023FrmsRxOk | 0 | 0 | The number of frames that are successfully received. This counter does not include frames received with frame-too-long, FCS, leng… |
| 1.3.6.1.3.3.1.1.15 | ieee8023OctetsRxOk | 0 | 0 | The number entry of data and padding octets in frames that are successfully received. This counter does not include frames receiv… |
| 1.3.6.1.3.3.1.1.16 | ieee8023McastFrmsRxOk | 0 | 0 | The number of frames that are successfully received and are directed to an active non-broadcast group address. This counter does … |
| 1.3.6.1.3.3.1.1.17 | ieee8023BcastFrmsRxOk | 0 | 0 | The number of frames that are successfully received and are directed to the broadcast group address. This counter does not includ… |
| 1.3.6.1.3.3.1.1.18 | ieee8023TooLongErrors | 0 | 0 | The number of frames that are received and exceed the maximum permitted frame size. This counter is incremented when the frameToo… |
| 1.3.6.1.3.3.1.1.19 | ieee8023AlignErrors | 0 | 0 | The number of frames that are not an integral number of octets in length and do not pass the FCS check. This counter is increment… |
| 1.3.6.1.3.3.1.1.20 | ieee8023FcsErrors | 0 | 0 | The number of frames that are an integral number of octets in length and do not pass the FCS check. This counter is incremented w… |
| 1.3.6.1.3.3.1.1.21 | ieee8023IrLengthErrors | 0 | 0 | The number of frames with a length field value between the minimum unpadded LLC data size and the maximum allowed LLC data size i… |
| 1.3.6.1.3.3.1.1.22 | ieee8023OorLengthFields | 0 | 0 | The number of frames with a length field value greater than the maximum allowed LLC data size. If true 802.3 is followed for laye… |
| 1.3.6.1.3.3.1.1.23 | ieee8023IntlMacRxErrors | 0 | 0 | The number of frames that would otherwise be received by the station, but could not be accepted because of an internal MAC sublay… |
| 1.3.6.1.3.3.1.1.24 | ieee8023InitMac | 0 | 0 | Reinitializes the MAC and PLS (physical layer signaling). All MIB counters are set to 0. The states of the status variables (desc… |
| 1.3.6.1.3.3.1.1.25 | ieee8023PromRxStatus | 0 | 0 | This variable combines the enable ieee8023PromRx, disable ieee8023PromRx, and read ieee8023PromStatus MAC actions. Setting this v… |
| 1.3.6.1.3.3.1.1.27 | ieee8023TxStatus | 0 | 0 | This variable enables the MAC sublayer to be explicitly enabled/disabled for transmitting frames. If a frame is being transmitted… |
| 1.3.6.1.3.3.1.1.28 | ieee8023McastRxStatus | 0 | 0 | Enables/disables reception of multicast frames. To actually receive multicasts, both this variable AND ieee8023MacSubLayerStatus … |
| 1.3.6.1.3.3.1.1.29 | ieee8023MacAddress | 0 | 0 | This object contains the MAC station address (i.e., the Ethernet address). |
| 1.3.6.1.3.3.1.1.30 | ieee8023SqeTestErrors | 0 | 0 | The number of times that the SQE TEST ERROR status was received. |