This variable enables the MAC sublayer to be explicitly
enabled/disabled for transmitting frames. If a frame is being
transmitted when this variable is set to disabled(2), that
transmission is completed. Note that ieee8023MACSubLayerStatus
has an effect on this variable.
Parsed from file SYNOPTICS-IEEE8023-MIB.mib
Module: SYNOPTICS-IEEE8023-MIB
ieee8023TxStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable enables the MAC sublayer to be explicitly enabled/disabled for transmitting frames. If a frame is being transmitted when this variable is set to disabled(2), that transmission is completed. Note that ieee8023MACSubLayerStatus has an effect on this variable." ::= { ieee8023IfEntry 27 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.3.3.1.1.1 | dot3Index, ieee8023IfIndex | 0 | 0 | The value assigned to the INX-NTS Ethernet interface. Because the INX-NTS has only one interface, this variable always returns 1. |
1.3.6.1.3.3.1.1.2 | dot3InitializeMAC, ieee8023FrmsTxOk | 0 | 0 | The initialization status of the MAC and PLS subsystems of the interface. Because the MAC and PLS subsystems on the INX-NTS are… |
1.3.6.1.3.3.1.1.3 | dot3MACSubLayerStatus, ieee8023SingleCollFrms | 0 | 0 | The operational status of the MAC sublayer, i.e., whether it is ready to transmit and receive frames. Because this sublayer is a… |
1.3.6.1.3.3.1.1.4 | dot3MulticastReceiveEnabled, ieee8023MultipleCollFrms | 0 | 0 | The Multicast Receive status, i.e., whether the INX-NTS is configured to receive frames with a multicast address. Because Multi… |
1.3.6.1.3.3.1.1.5 | dot3AlignmentErrors, ieee8023OctetsTxOk | 0 | 0 | The number of frames received on the interface that are not an integral number of octets in length (i.e., the number of bits the… |
1.3.6.1.3.3.1.1.6 | dot3FCSErrors, ieee8023DefTx | 0 | 0 | The number of frames received on the interface that are an integral number of octets in length (i.e., the number of bits they co… |
1.3.6.1.3.3.1.1.7 | ieee8023McastFrmsTxOk | 0 | 0 | The number of frames successfully transmitted to a multicast address. This counter does not include frames sent to the broadcast … |
1.3.6.1.3.3.1.1.8 | ieee8023BcastFrmsTxOk | 0 | 0 | The number of frames successfully transmitted to the broadcast address. This counter does not include frames sent to a multicast … |
1.3.6.1.3.3.1.1.9 | ieee8023LateColls | 0 | 0 | The number of times that a collision has been detected later than 512 bit times into the transmission of a packet. 512 bit times … |
1.3.6.1.3.3.1.1.10 | ieee8023ExcessColls | 0 | 0 | The number of frames that are not transmitted because of excessive collisions. |
1.3.6.1.3.3.1.1.11 | ieee8023IntlMacTxError | 0 | 0 | The number of frames that would otherwise be transmitted by the station, but could not be sent because of an internal MAC sublaye… |
1.3.6.1.3.3.1.1.12 | ieee8023CsErrors | 0 | 0 | The number of times that carrier sense was lost or never appeared when attempting to transmit a packet. This counter is increment… |
1.3.6.1.3.3.1.1.13 | ieee8023ExcessDef | 0 | 0 | The number of frames that deferred for an excessive period of time. |
1.3.6.1.3.3.1.1.14 | ieee8023FrmsRxOk | 0 | 0 | The number of frames that are successfully received. This counter does not include frames received with frame-too-long, FCS, leng… |
1.3.6.1.3.3.1.1.15 | ieee8023OctetsRxOk | 0 | 0 | The number entry of data and padding octets in frames that are successfully received. This counter does not include frames receiv… |
1.3.6.1.3.3.1.1.16 | ieee8023McastFrmsRxOk | 0 | 0 | The number of frames that are successfully received and are directed to an active non-broadcast group address. This counter does … |
1.3.6.1.3.3.1.1.17 | ieee8023BcastFrmsRxOk | 0 | 0 | The number of frames that are successfully received and are directed to the broadcast group address. This counter does not includ… |
1.3.6.1.3.3.1.1.18 | ieee8023TooLongErrors | 0 | 0 | The number of frames that are received and exceed the maximum permitted frame size. This counter is incremented when the frameToo… |
1.3.6.1.3.3.1.1.19 | ieee8023AlignErrors | 0 | 0 | The number of frames that are not an integral number of octets in length and do not pass the FCS check. This counter is increment… |
1.3.6.1.3.3.1.1.20 | ieee8023FcsErrors | 0 | 0 | The number of frames that are an integral number of octets in length and do not pass the FCS check. This counter is incremented w… |
1.3.6.1.3.3.1.1.21 | ieee8023IrLengthErrors | 0 | 0 | The number of frames with a length field value between the minimum unpadded LLC data size and the maximum allowed LLC data size i… |
1.3.6.1.3.3.1.1.22 | ieee8023OorLengthFields | 0 | 0 | The number of frames with a length field value greater than the maximum allowed LLC data size. If true 802.3 is followed for laye… |
1.3.6.1.3.3.1.1.23 | ieee8023IntlMacRxErrors | 0 | 0 | The number of frames that would otherwise be received by the station, but could not be accepted because of an internal MAC sublay… |
1.3.6.1.3.3.1.1.24 | ieee8023InitMac | 0 | 0 | Reinitializes the MAC and PLS (physical layer signaling). All MIB counters are set to 0. The states of the status variables (desc… |
1.3.6.1.3.3.1.1.25 | ieee8023PromRxStatus | 0 | 0 | This variable combines the enable ieee8023PromRx, disable ieee8023PromRx, and read ieee8023PromStatus MAC actions. Setting this v… |
1.3.6.1.3.3.1.1.26 | ieee8023MacSubLayerStatus | 0 | 0 | This variable causes the MAC sublayer to enter the normal operational state at idle. The PLS is reset by this operation. It is ac… |
1.3.6.1.3.3.1.1.28 | ieee8023McastRxStatus | 0 | 0 | Enables/disables reception of multicast frames. To actually receive multicasts, both this variable AND ieee8023MacSubLayerStatus … |
1.3.6.1.3.3.1.1.29 | ieee8023MacAddress | 0 | 0 | This object contains the MAC station address (i.e., the Ethernet address). |
1.3.6.1.3.3.1.1.30 | ieee8023SqeTestErrors | 0 | 0 | The number of times that the SQE TEST ERROR status was received. |