Delay CTS High.
Specifies the number of padding characters to be inserted
between the dropping of RTS and the raising of CTS. Only
required for synchronous operation.
Applicable: TERM controller only
Parsed from file Mega0025.MIB.txt
Company: None
Module: SAT-MEGA-MIB
Delay CTS High.
Specifies the number of padding characters to be inserted
between the dropping of RTS and the raising of CTS. Only
required for synchronous operation.
Applicable: TERM controller only
Parsed from file SAT-MEGA-MIB.mib
Module: SAT-MEGA-MIB
Vendor: SAGEM
Module: SAT-MEGA-MIB
[Automatically extracted from oidview.com]
ctrlParamDelayToCTSHigh OBJECT-TYPE SYNTAX INTEGER (0..256) ACCESS read-write STATUS mandatory DESCRIPTION "Delay CTS High. Specifies the number of padding characters to be inserted between the dropping of RTS and the raising of CTS. Only required for synchronous operation. Applicable: TERM controller only" REFERENCE "TERM" ::= { ctrlParamEntry 50 }
ctrlParamDelayToCTSHigh OBJECT-TYPE SYNTAX INTEGER (0..256) ACCESS read-write STATUS mandatory DESCRIPTION "Delay CTS High. Specifies the number of padding characters to be inserted between the dropping of RTS and the raising of CTS. Only required for synchronous operation. Applicable: TERM controller only" REFERENCE "TERM" ::= { ctrlParamEntry 50 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1038.4.3.4.1.1 | ctrlParamIndex | 0 | 0 | Index The position of this controller in relation to 'BASE'. i.e. BASE = 0 NMSC = 1 PS01 = 2 ... Applicable: All controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.2 | ctrlParamName | 0 | 0 | Name. The unique 4 character name by which this controller is known. Applicable: All controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.3 | ctrlParamType | 0 | 0 | Type. The type of controller this is. Applicable: All controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.4 | ctrlParamSubType | 0 | 0 | Sub-Type. The link between the controller and its associated hardware type. Applicable: X25, SDLC, QLLC, HDLC and NULL controller … |
| 1.3.6.1.4.1.1038.4.3.4.1.5 | ctrlParamNoChannels | 0 | 0 | Number of channels. The number of logical channels configured on the controller. Applicable: All controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.6 | ctrlParamSpeed | 0 | 0 | Speed. The clock speed of the interface. Applicable: X25, SDLC, QLLC, HDLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.7 | ctrlParamInterfaceType | 0 | 0 | The serial interface type. Note, Only applicable to MegaCard Applicable: XFRM, NFRM, PPP, X25, HDLC controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.8 | ctrlParamPacketSize | 0 | 0 | Packet Size. The maximum packet size in bytes of outgoing packets, this parameter must be less than or equal to the 'BASE' statist… |
| 1.3.6.1.4.1.1038.4.3.4.1.9 | ctrlParamV54Modem | 0 | 0 | V54 Modem. Enable V54 loop back testing. Note this does not initiate loop back testing, the loop back is initiated by typing in th… |
| 1.3.6.1.4.1.1038.4.3.4.1.10 | ctrlParamAddress | 0 | 0 | Address. The logical address designation of the controller. Applicable: X25, HDLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.11 | ctrlParamOptions | 0 | 0 | Options. A range of controller options, options may be specified individually or added together. Note, that the values returned by… |
| 1.3.6.1.4.1.1038.4.3.4.1.12 | ctrlParamInitFrame | 0 | 0 | Initial Frame. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.13 | ctrlParamT1 | 0 | 0 | T1. Timer for retransmission of unacknowleged frames. Specified in 0.1 second units. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC … |
| 1.3.6.1.4.1.1038.4.3.4.1.14 | ctrlParamTries | 0 | 0 | Tries. The number of times a frame will be retransmitted before a link restart is initiated. Applicable: X25, SDLC, QLLC, HDLC, CO… |
| 1.3.6.1.4.1.1038.4.3.4.1.15 | ctrlParamKLevel2 | 0 | 0 | KLevel 2. The level 2 window size. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.16 | ctrlParamKLevel3 | 0 | 0 | KLevel 3. The level 3 window size. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.17 | ctrlParamLineGroup | 0 | 0 | Line Group. The line group is used for load sharing. If two links have same (non-zero) line group then data may be shared between … |
| 1.3.6.1.4.1.1038.4.3.4.1.18 | ctrlParamLCGN | 0 | 0 | LCGN. The logical channel group number for this link. Applicable: X25, HDLC, CONS, ILAN, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.19 | ctrlParamLCNOffset | 0 | 0 | LCN Offset. This parameter is used in conjunction with the LCGN. It's purpose is to shift the channel range by the appropriate off… |
| 1.3.6.1.4.1.1038.4.3.4.1.20 | ctrlParamAddressGroup | 0 | 0 | Address Group. This parameter is used in conjunction with the address group field in the x25 file to provide different addressing… |
| 1.3.6.1.4.1.1038.4.3.4.1.21 | ctrlParamFrameSequence | 0 | 0 | Frame Sequence. This parameter determines if normal or extended frame sequencing is supported. Applicable: X25, SDLC, QLLC, HDLC, … |
| 1.3.6.1.4.1.1038.4.3.4.1.22 | ctrlParamCallTimeOut | 0 | 0 | Call Time Out. The time in seconds the MegaPAC will wait to receive a call accept packet before clearing the call. Applicable: X25… |
| 1.3.6.1.4.1.1038.4.3.4.1.23 | ctrlParamErrorThreshold | 0 | 0 | Error Threshold. The number of CRC errors that will be accepted before generating an error report. Applicable: X25, HDLC, CONS, IL… |
| 1.3.6.1.4.1.1038.4.3.4.1.24 | ctrlParamLoopBarPriority | 0 | 0 | Loop Bar Priority. Prevents calls from looping on the same controller. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller … |
| 1.3.6.1.4.1.1038.4.3.4.1.25 | ctrlParamExtendedCallMgmt | 0 | 0 | Extended Call Management. Invokes extended packet processing facilities via the MAC file. For PPP, IN and OUT have special meaning… |
| 1.3.6.1.4.1.1038.4.3.4.1.26 | ctrlParamOptionalTimers | 0 | 0 | Optional Timers. Optional level 3 timers for clearing calls when a clear confirmation has not been received after a clear request… |
| 1.3.6.1.4.1.1038.4.3.4.1.27 | ctrlParamOptionalFlags | 0 | 0 | Optional Flags. This parameter is used to insert extra flags between frames to slow down the rate of transmission. It will only t… |
| 1.3.6.1.4.1.1038.4.3.4.1.28 | ctrlParamTransportLevelType | 0 | 0 | Transport Level Type. Enable the ISO transport facility. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.29 | ctrlParamTransportClass | 0 | 0 | Transport Class. The type of transport class implemented. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.30 | ctrlParamDefaultWindowSize | 0 | 0 | Default Window Size. The initial credit limit to be used on a transport session. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL co… |
| 1.3.6.1.4.1.1038.4.3.4.1.31 | ctrlParamDisableFlowControl | 0 | 0 | Disable Flow Control. Enable/disable flow control on a transport class 2 call. Applicable: X25, HDLC, CONS, XLAN, DLC and NULL con… |
| 1.3.6.1.4.1.1038.4.3.4.1.32 | ctrlParamTSAPFormat | 0 | 0 | TSAP Format. Determines how the TSAP's will be treated internally by the MegaPAC. If set to text the local and remote TSAP's will… |
| 1.3.6.1.4.1.1038.4.3.4.1.33 | ctrlParamMaximumTPDUSize | 0 | 0 | Max. TPDU Size. The maximum Transport Protocol Data Unit Size. Applicable: X25, HDLC, CONS, ILAN, XLAN and NULL controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.34 | ctrlParamTTRTime | 0 | 0 | TTR Timer. Time To Resynchronise. Specifies the time delay in seconds for the transport class three timer to resync at the initia… |
| 1.3.6.1.4.1.1038.4.3.4.1.35 | ctrlParamTWRTime | 0 | 0 | TWR Timer. Time to Wait for Resynchronisation. The time delay in seconds allowed for the transport class 3 timer at the respondin… |
| 1.3.6.1.4.1.1038.4.3.4.1.36 | ctrlParamDestinationAddress | 0 | 0 | Destination Address. The physical address of the target device. Applicable: CONS, ILAN, DLC and XLAN controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.37 | ctrlParamDSAP | 0 | 0 | DSAP. The Destination Service Access Point. Applicable: CONS, ILAN, DLC and XLAN controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.38 | ctrlParamSSAP | 0 | 0 | SSAP. The Source Service Access Point. Applicable: CONS, ILAN, DLC and XLAN controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.39 | ctrlParamSDLCOptions | 0 | 0 | SDLC Options. A range of link level options used for establishing IBM connections. Applicable: SDLC and QLLC controller types |
| 1.3.6.1.4.1.1038.4.3.4.1.40 | ctrlParamPrimaryStation | 0 | 0 | Primary Station. This parameter determines whether the MegaPAC will operate as a HOST primary connection (yes) or a CLUSTER secon… |
| 1.3.6.1.4.1.1038.4.3.4.1.41 | ctrlParamIdleDetectTime | 0 | 0 | Idle Detect Timer. This parameter determines the time period in tenths of a second before an unacknowleged POLL/RESPONSE frame wil… |
| 1.3.6.1.4.1.1038.4.3.4.1.42 | ctrlParamPollInterval | 0 | 0 | Poll Interval. The time period in tenths of a second between sending POLL frames. Applicable: SDLC, QLLC, MAP and MULT controller … |
| 1.3.6.1.4.1.1038.4.3.4.1.43 | ctrlParamDuplex | 0 | 0 | Duplex. Enables SDLC full duplex operation, half duplex operation is reserved for future use. Applicable: SDLC and QLLC controller… |
| 1.3.6.1.4.1.1038.4.3.4.1.44 | ctrlParamTransmitDelay | 0 | 0 | Transmit Delay. Determines the time period in tenths of a second between the MegaPAC receiving an RR frame with the P-Bit set and… |
| 1.3.6.1.4.1.1038.4.3.4.1.45 | ctrlParamSlowPollTimer | 0 | 0 | Slow Poll Timer. When the controller has been defined as a primary station a slow poll rate can be specified for polling a Cluste… |
| 1.3.6.1.4.1.1038.4.3.4.1.46 | ctrlParamMaxCallInterval | 0 | 0 | Max. Call Interval. When controller is configured as a primary station, a call request retry interval may be defined, so as to av… |
| 1.3.6.1.4.1.1038.4.3.4.1.47 | ctrlParamMaxCallCycles | 0 | 0 | Max. Call Cycles. This parameter is used in conjunction with the Maximum Call Interval parameter. It specifies the maximum number… |
| 1.3.6.1.4.1.1038.4.3.4.1.48 | ctrlParamGroupPoll | 0 | 0 | Group Poll. Used in SNA applications, where the specified value would generate multiple down-stream poll requests. Applicable: QLL… |
| 1.3.6.1.4.1.1038.4.3.4.1.49 | ctrlParamDelayToRTSLow | 0 | 0 | Delay RTS Low. Specifies the number of padding characters to be inserted between the end of data transmission and the dropping of… |
| 1.3.6.1.4.1.1038.4.3.4.1.51 | ctrlParamInputSyncDeletion | 0 | 0 | Input Sync Deletion. If set, all SYNC characters will be stripped prior to transmission. Only effective in synchronous full duple… |
| 1.3.6.1.4.1.1038.4.3.4.1.52 | ctrlParamOutputSyncInsertion | 0 | 0 | Output Sync Insertion. Specifies the number of SYNC characters to be transmitted prior to the start of the data block. Only effec… |
| 1.3.6.1.4.1.1038.4.3.4.1.53 | ctrlParamDCDFilter | 0 | 0 | DCD Filter. A filter delay specified in tenths of a second which prevents unwanted link restarts caused by toggling of DCD signal.… |
| 1.3.6.1.4.1.1038.4.3.4.1.54 | ctrlParamInhibitTimeFill | 0 | 0 | Inhibit Time Fill Allows the insertion of time fill frames to compensate for network delays. Effective in synchronous mode only. A… |
| 1.3.6.1.4.1.1038.4.3.4.1.55 | ctrlParamDirectedBroadcasts | 0 | 0 | Directed Broadcasts. ???. Applicable: LAN and TLAN Controllers only |
| 1.3.6.1.4.1.1038.4.3.4.1.56 | ctrlParamDefaultLocalPrinter | 0 | 0 | Default Local Printer. The number of the channel which is reserved for a Screen Print server, a value of (0) disables the Screen … |
| 1.3.6.1.4.1.1038.4.3.4.1.57 | ctrlParamNewLANInterface | 0 | 0 | New NFRM Port. The controller marks the first position of a controller connection to a LAN interface. All other controllers define… |
| 1.3.6.1.4.1.1038.4.3.4.1.58 | ctrlParamNewSerialInterface | 0 | 0 | New NFRM Port. The controller marks the first position of a controller connection to a serial interface. All other controllers def… |
| 1.3.6.1.4.1.1038.4.3.4.1.59 | ctrlParamDlci | 0 | 0 | DLCI Number |
| 1.3.6.1.4.1.1038.4.3.4.1.60 | ctrlParamMode | 0 | 0 | Status of DLCI. Defines a Network to Network Interfaces (NNI) or User Network Interface (UNI) implentation. Where MegaPAC connects… |
| 1.3.6.1.4.1.1038.4.3.4.1.61 | ctrlParamLmi | 0 | 0 | Type of Local Management Interface (LMI). Ansi = ANSI LMI yes = T1.S1 LMI no = LMI disabled. |
| 1.3.6.1.4.1.1038.4.3.4.1.62 | ctrlParamKeepAliveTimer | 0 | 0 | Only applicable if the LMI is active. Specifies in seconds the interval between keep alive messages. If this end is a DTE, this i… |
| 1.3.6.1.4.1.1038.4.3.4.1.63 | ctrlParamFullStatusInterval | 0 | 0 | Full status enquiry timer (number of times of T391/T392) Specifies how often a DTE sends a or a DCE expects a Full Status Request… |
| 1.3.6.1.4.1.1038.4.3.4.1.64 | ctrlParamBandwidth | 0 | 0 | Rhe sample period used in enforcing the committed information rate (CIR). The CIR expressed in terms of characters per 1/10 th se… |
| 1.3.6.1.4.1.1038.4.3.4.1.65 | ctrlParamBurstCommit | 0 | 0 | Burst Commit, i.e the number of characters the remote end is committed to buffering, in our case in a 1/10 th of a second period |
| 1.3.6.1.4.1.1038.4.3.4.1.66 | ctrlParamBurstEligibility | 0 | 0 | Burst Eligibility, i.e the DLCI in questions is enabled to transmit a burst beyond its committed information rate, when enabled t… |
| 1.3.6.1.4.1.1038.4.3.4.1.67 | ctrlParamTimerT3 | 0 | 0 | T3. Timer to disconnect the link if no flags are received. Specified in 0.1 second units. Applicable: X25 controller types with XI… |
| 1.3.6.1.4.1.1038.4.3.4.1.68 | ctrlParamFlowControl | 0 | 0 | Enables MULT flow control. On MULT controller type flow control inhibits data on all ressources when a single ressource requires … |
| 1.3.6.1.4.1.1038.4.3.4.1.69 | ctrlParamConfigState | 0 | 0 | Command to set the state of the controller. Set this parameter to 1 to restart the controller. Set this parameter to 2 to stop th… |
| 1.3.6.1.4.1.1038.4.3.4.1.70 | ctrlParamTry | 0 | 0 | This value used to detect whether connection to the other end has been lost. The number specified is the ratio between Status Req… |